automags.org member gun reviews

[The Action Figure]

post specs and a review of your gun
Ok ill start



03 autococker
color: red
Barrel: 12 in boomstick
reg: stock
hopper: evolution 2
everthing else: stock
nitro: mac development 68/3000

this gun rips, its fairly fast, and it is extremely quiet and accurate. The gun gun looks nice, and is pretty light. the only problem I have had with this marker is that it took me a while to fine tune.






powerfeed 68 mag
color: blue
barrel: cp 12in barrel
hopper: evolution 2
nitro: 68/3000 steel pure energy

This mag is really slow, but is alot lighter than my cocker. This is the easyist maintaine gun on the market, no tuning needed. Really accurate. Great for a front man tryin to make it to the fifty.

[fcpchop]

ULE E-Mag
color: Black
Barrel: Stock 04 Timmy Barrel
reg: stock i guess, its in the valve
hopper: Clear evolution 2 W/ Z Board
everthing else: Black ULE Body, 1.37 Software
Drop Foward: Warped Sportz adjustable
nitro: 68-CI 4500-PSI PMI Pure Energy

This gun is awesome, it Rips! i might get 3.2 put in soon

[gungrave253]

okay:

tippmann 98 c
double trigger
rocket cocker
gravity hopper
-its good for begining good to learn basics and can take a beating.

2k3 vert feed autococker
rickochet(sp?)
teardrop barrel (ew smart parts)
-i liked this except for the chops. good rof, bad on maitenence cuz im bad at it and teardrop barrel was not make to chop in. you have no chance of cleaning it out.

2k4 blue viking
dye sticky 3's
bp no-rider clamping feedneck
was board and eyes
matchstick barrel kit
rickochet ak hopper
shocktech drop
empire on/off asa
-i havent even gotten to play with it and im still inpressed. i was dry firing it and i was like "damn that is fast" then i realized i was in bypassed mode and limited to 13 bps!! i love this marker soooo much and would recomend it to anyone lookin for great performance, easy maitenence and reliablility for a little less money than a dm4 or a timmy

[flyinasian016]

ULE E-mag
Colour: Black
Barrel: Bob Long Longshot
Valve: E-mag Valve
Hopper: Warp+12vt
Anything else: Black Warp ULE Body, 1.37 Software, Level 10
Drop Forward: Some Sort of mini-Drop
Nitro: 68/3000 and 45/45 ACI Bulldogs

Sending it in tommorow to get it flashed to 3.2 and going to send the rail to get it milled into a ULE Rail soon. I got the trigger so light you can blow on it and it shoots. Its stupid fast and accurate. Its almost a ninja, i just gotta get either the E-Max or the X-valve to put in. Dont have pics of ULE installed yet.

[Fatjon]

Matrix lcd
color: black
Barrel: Macdev Match Stik
Hopper: Halo b
Frame: toxic magnetic with milled down switch trigger
Drop: none
Tank: 68/4500 maxflo lp

Great shooting gun. Shoots ropes, and consitant. The Match Stik is an awsome barrel kit. Like it way more than my freak.

[The Action Figure]

thanks guys I started this thread last night with no replies, and thought man am I a moron

[afrankart]

Marker: Dye DM4
Color: Cobalt
Barrel: Matching Ultralite
Hopper: Halo B w/ Victory and rip
Drop: CP Rail Drop
Tank: Centerflag Dynaflow 68/4500 @ 550 psi
Other Goodies: XSF Advantage Chip and CP Roller Bearing Trigger




Review: By far the best gun I have ever owned. Some ppl hate the looks, but to me, it is hot hot hot. I have never ever shot a marker that is as smooth, quiet, and as fast as this. At one point in time, I thought my featherlite viking was as good as it got, imo that just isn't true anymore. My only complaint is that I am getting 7-8 pods and a Halo full of of a 68/4500 when I was used to getting over 12. No biggie though.

All things considered, I would rate this particular setup as a 9.7/10

*I may be biased though, it is my setup *

[lldb003]

nice guns man i will get my 68 classic mag up here soon as soon as i get my ule body and my trigger frame.... current mods: black x-valve, pyscho ballistics drop foward, all american barrel, 4 peice j&j barrel, and a freak kit, air america reg and soon my ule body and intellifeed blade trigger

[flyinasian016]

Hey Afrankart, where did you ge that F*ck Smart Parts Sticker? I want one, where i can i get it?

[Snertz]

The money shot!

Marker: Emag
Color: Black, All black
Barrel: 14in .689 Stiffi
Hopper: Smoke Y-board Egg or halo B
Air: 68/45 Maxxy or 68/45 N.Duck Megareg
Software: 3.2 baby!
Other goodies: ULE milling on rail, and Custom internal gripframe milling. Xvalve and what not..

This marker is simply awsome, decently light, and really fast.

[Snertz]

Backup!

Marker: 2k1 v.2 Base milled Angel LCD
Color: All Black again!
Barrel: Full Stainless Freak, 14in Teardrop tip
Hopper: Smoke Y-board Egg or Halo B
Air: 68/45 maxxy
Other goodies: Dual DYE volumizers, DYE Izon, LP Anti Chop Mod pioneered by yours truely! (Mod here: http://www.automags.org/forums/showthread.php?t=136117)

Pretty good gun for what I got it for. Fun to tinker with, simple operation design. Fast to boot! Hasn't failed me yet!

[jarley77]

ULE Emag
Color: Black
Barrel: 12" dye ultralite
Valve: E-mag Valve
Hopper: evo 2
Anything else: Xtreme Depot IT body, 3.2 Software, Level 10, ule milled rail
Drop Forward: kapp III
Nitro: PMI 88/4500

[The Action Figure]

sick guns people

[laxkid]

Marker: fbm cobra cocker
color: green
barrel: green front 12inch cp kit
valve: shocktech rat 3:16
threeway: shocktech bomb
ram: shocktech fat
lpr: STO
bolt & bb : COLE venturi screwin
feed neck: NW teer drop mid rise
trigger frame :2nd G hinge
regulator :WGP ergo
drop : shocktech
hopper : evo 2
tank : AA raptor rex 68 3k 370 psi output( adjustable tank)

It shot smoothly but was hard to walk the trigger with I like the closed bolt design and the easy field strip design I also liked the light weight design asyou can see from the pics choping wasnt to big of an issue because I get it timed every other week , what it is lacking is speed. it performed amazingly in field tests I give it an 8/10

[barberjohn]

Main marker:
03 WS Speed Demon
color: dust red
barrels: Dye Ul, stock, soon to be full freak
hopper: Halo b
reg: PE thor reg until minireg gets fixed
drop: shocktech long
tank: lp 68 45 new style crossfire
everything else: WS volumizer, WS back plate, WS snatch grip

Review: very light for its size, i am used to an all ULE emag, so this is a bit different for me. this thing is extremely fast, especially with paint. sensi actually works great for me, and i didnt chop a ball in the breach all day yesterday. the milling is to die for, but it isnt too much, and the snatch grip comes in handy while going for a far off bunker. it is a great gun to get used to, very fast, and the opto board still bounces, no matter what they say about it .


Backup Marker:
fully stock vert feed Emag
color: polished ss and black
barrel: old style AA
hopper: halo b
drop: chrome cp flame
tank: none at the moment
everything else: swivel macro fittings

Review: great gun for a backup. a bit on the heavy end, as usual, but still is bearable. i just acquired it as of yesterday, this kid traded me for my stock spyder e99 that i got for 70 bucks, so i am happy with it . works fine in manual, just need a charger so i can get e going. im not sure if it is from use or what because it was almost too easy to hit the sweet spot on this thing in manual, and the guy was almost outrunning my speed! i plan to get the rail milled out, get 3.2, and lvl 10, but i want to just keep the rest the same, and maybe have one of the few remaining stock emags, not that anybody cares. great gun for the price, and thank goodness for the unknowledgable newbs who havent played or affiliated with paintball in a year !

heres a pic of them together...