Bunches of Emag questions.

[kauai_paintball]

Hello, I am attempting to get an emag. questions:
Dose annodizing fix scratches on used guns?
Can you fix scratches on used guns?
Dose it need a certain kind of tank?
Can I get the bottom half ULE milled to be lighter?
Will fireblade triggers work on them?
Can you put ULT on it for the mech mode?
Dose the GO x valve program work with Emag valves?
Can I put Alpha, or rouge rails on them?
How much dose it cost to upgrade software?
Can I get them ACE'd?
Do I need to?
how long is there trigger pull (on my angel like VERY short, 1cm maybe) ?
Can deadlywind make Warp karta bodies (pleeeeeeeese :) ) ?
Will my tank work on it? (47/3k crossfire aluminum)
Help!

[laxkid]

1. depends how deep
2. depends how deep
3. N2 or compressed only
4. yes
5. yes
6. no
7. yes
8. maybe
9. free just pay for shipping
10.yea (do it yourself) purchase the board form agd
11.not really if it has LVL 10
12.not really familliar with angel pull it deppends on how it is set up
13.I wish :)
14. yea just might need to fill it every game

[Lohman446]

Hello, I am attempting to get an emag. questions:

Dose annodizing fix scratches on used guns?
Sure, as long as there not too deep, I mean you are resurfacing the thing in essence. Though annodizing AGD products is risky as the tolerances on teh body, rail, and valve are so tight.

Can you fix scratches on used guns?
Sure.. annodize them

Dose it need a certain kind of tank?

A high pressure tank

Can I get the bottom half ULE milled to be lighter?
Yes BlackVCG will do it, as well as several others - thats who did mine

Will fireblade triggers work on them?

Can you put ULT on it for the mech mode?
Yes - but from what i understand this causes problems in e-mode as the solenoid requires use of the pressure from the valve to reset it and the ULT lessens this so its not recommended

Dose the GO x valve program work with Emag valves?
Yes - but some E-mag valves (E-Max) are x-valves, and the E-mag valves are RT valves so the X valve is a touch lighter (3 ounces) and includes level 10

Can I put Alpha, or rouge rails on them?
I beleive you can put rogue rails on them

How much dose it cost to upgrade software?
$35? I think thats about right

Can I get them ACE'd?
Do I need to?
It is conceivably possible. Especially with 3.2 software that gives you the programming in the board. Remember E mag and X mag boards are the same and X have ACE. People have done it - level ten in most circumstances negates the need for it, many people with Xs dont ever use ACE - I have been contemplating putting it on mine as LX is not perfect, but neither are most ACE systems.

how long is there trigger pull (on my angel like VERY short, 1cm maybe) ?
The great thing about the e-mag trigger is it is nearly infinetly adjustable, mine is extremely short and light, some peoples are different - you can get the trigger set to how you want it, BlackVCG did mine and it RIPS

Can deadlywind make Warp karta bodies (pleeeeeeeese :) ) ?

Will my tank work on it? (47/3k crossfire aluminum)
As long as it is high pressure (red band), though with a good trigger you will find you go through paint very very quickly and mags are not great on efficiency.
Help

[jimmyjobob]

.

the fireblade does work on the emag. may need adjusting but it does work.

[RRfireblade]

Most have been answered but.........

Dose annodizing fix scratches on used guns?
Can you fix scratches on used guns?

Anno does not fix scratches,sanding or filing to the depth of the scratch removes it,then of 'course you have a shiny silver spot that needs to be anno'd.You can go as deep as you want but it may leave a void worse than the scratch.

Dose it need a certain kind of tank?

As stated,High Pressure Air (~700psi or more)

Can I get the bottom half ULE milled to be lighter?

Sure.

Will fireblade triggers work on them?

It was designed for them and Xmags.

Can you put ULT on it for the mech mode?

You 'could' but it will likely slow down the ROF or cause Emode to function erratically.

Dose the GO x valve program work with Emag valves?

Sure,works with any AGD valves.

Can I put Alpha, or rouge rails on them?

Rouges Emag/RTP

How much dose it cost to upgrade software?

The cost of shipping to AGD+$20 return(I believe) or free at an AGD attended event or it varies if sent to an AGD satallite tech.

Can I get them ACE'd?
Do I need to?

Yes and only if you don't think L10 is not enough protection,or you prefer a more seemless ACE function or you want to highest efficiency possible from a mag and still be chop free.


how long is there trigger pull (on my angel like VERY short, 1cm maybe) ?

It can be very short but not normally as short as a micro switch gun.It can however be much lighter than a micro switch gun.

Can deadlywind make Warp karta bodies (pleeeeeeeese :) ) ?

Anything can be done for a price.

Will my tank work on it? (47/3k crossfire aluminum)

If it outputs 700psi or more,yup.

[dwab3000]

i was gonna post a thread like this...you beat me to it...

good luck on your e-mag, i cant wit to finish out the talking and get mines sent