For some reason my ACE is not working in my X-MAG PLZZZ help

[sean33]

i shot a couple of time also cleaned my ace and it does not work? i dont no why?? plzz help
Also when i put it on electric with ACE off it still does not fire...

[11 Bravo]

Check and make sure that the screw that holds in the ace board is grounding well (making good contact). Take the screw out and check the threads and make sure theres no paint, dirt or corrosion (be carefull).

As for it not firing with the ace off. Does the board turn on? Is your battery charged up?

Make sure that the trigger magnet is not too close to the hess.

[sean33]

ya batery is chareged and magnests are fine the board does turn on idont no y it doesnt fire i gotta loo at the board..

[shades]

Is your shot counter registering your trigger pulls?

[Tao]

Check your shot registry and check your field strip screw, tighten it a bit (DON"T crank it just a bit :P ) too.

[sean33]

has this ever happend to any one else??

[Tao]

has this ever happend to any one else??

I had it happen when I either tuned the sensor to go of right away or not at all. Also when the field strip screw is too loos the sear does not make contact with the vlavle. Usually if that happens you will get a shot and a bunch of blank pulls and another shot after several pulls...

[sean33]

ya somthing like that is happening but also nowi shot it this mornig it doent even work in mech mode...only somtimes it does when i pull back PRETTY hard it will fire....also cant even sweet spot...i dont no why...maybe you guys do...
Can Tunna fix this problem???? also Vision still doent work...netiher does electric mode even when vision is on..

[Alpha]

Check your tank?

[Tunaman]

Is your safety on?

[Tao]

ya somthing like that is happening but also nowi shot it this mornig it doent even work in mech mode...only somtimes it does when i pull back PRETTY hard it will fire....also cant even sweet spot...i dont no why...maybe you guys do...
Can Tunna fix this problem???? also Vision still doent work...netiher does electric mode even when vision is on..

Yeah pulling it back pretty hard and having it fire sounds like the sear is not making enough contact with the bolt. Try tightening the field strip scre like I said with the allen key.

[sean33]

well, i took it apart and i noticed that the glue stuff surrounding the ace eyes were melting...weird...maybe they were to hot during play and it started to melt....what i did was just bend the eyes upward closer to the breech and its workin now thats what i think the problem was....but what should i do to make the eyes more stable and not have them slip down again?? should i add some glue to them???
LMk
thxs

[sean33]

Yeah pulling it back pretty hard and having it fire sounds like the sear is not making enough contact with the bolt. Try tightening the field strip scre like I said with the allen key.

thnx that helped too,

[sean33]

Is your safety on?

no Mr. Tunna the safty was off the entire time.. but i think i found the problem..

[11 Bravo]

Be very carefull with the eyes. They dont make them anymore and I dont know of anyone that repairs them.