Best Way To Upgrade My Classic?

[Danielkong916]

Hey Guys I am just coming back into the sport and am on a bit of a budget as im sure many people are. I have a pretty stock but well maintained AGD Classic. I have done some cosmetic upgrades but I really want to get down to the meat and potatoes! So I have a Lvl 10 Bolt kit on the way. All my accessories Hopper and Nitro Tank are above par. My next theoretical upgrade is the Intelliframe but I am concerned that w/ the stock classic valve I may start shooting too fast.... Is this realistic or is the recharge w/ No2 in a classic valve fast enough for say walking the trigger @ around 8-10 BPS w/ a lvl 10 bolt? Really, Im just trying to upgrade in the correct order so one part of the gun doesn't start wearing on another or my internal upgrades aren't logical lol! Anyways I would love to hear your guys thoughts and I appreciate your time. Thanks in advance.
-Dan

OH 1 More Thing Can I Use A MiniMag Power Feed Body on the Standard Classic Rail?

[vf-xx]

should be able to use any body on a classic rail.

You run into problems putting some stainless bodies on Emag / RT pro rails because they have different cut outs for the front screw mount.

[Ando]

There's not many "performance" upgrades for a classic valve besides the lvl 10 and maybe installing a rt on/off or was it just the pin? I'm not sure but someone will clarify on that. There's been mix reviews on installing the on/off, some say it works great, some say it's minimal.

A Intelli-frame isn't going to make you shoot faster per-say. Just depends how dexterous (is that even a word ) you are. Some people shoot faster with one finger then two. I would go out and borrow someones marker (any marker) that has a blade trigger and test it out for yourself. You might not like shooting a double trigger.

If you do get one, best thing for you to do is practice...practice...practice...eventually you'll get better as the awkwardness of using 2 fingers and getting the timing down between each of your digits works its way out.

Can I Use A MiniMag Power Feed Body on the Standard Classic Rail

Yes

[Tym]

Other than the intellaframe you're going to want to get an X-vavle sooner or later..
It is smart getting the intellaframe first. That way when you do get your Xvalve you will be able to RT it IMO the main reason for having a double trigger..

As for the minimag body on a classic rail, yes it will bold right on. But you should also look into getting a ULE sometime. Then you can start getting some of the new barrels and hoppers (you will need a good hopper once you have an Xvalve and intellaframe).

[athomas]

You can't really walk a mag unless you have a ULT in a retro valve. The classic valve is the most stable valve that AGD makes. It can easily shoot 16 bps without shootdown. The only reason people use intelliframes is so they can pull the bottom of the longer trigger to make the trigger pull lighter or to pull with 2 fingers to double the available pull force. The intelliframe is a very nice tight frame though, and has a nice feel. If you put a retro on-off assembly in a classic valve it cuts the trigger pull force in half without sacrificing performance. The level 10 is the best upgrade for any mag. The ULE body is nice because it does open up a whole bunch of barrel options and it is nice to not have to worry about hopper elbows.

[Mechanic79]

Post 20:

http://www.pblegion.com/showthread.php?t=818