guaging interest in ZAP sleeper type setup

[knownothingmags]

* frames i do not own and will need test frames.
** dont have and may take more time to spec out
1st off.
if i do a Zap the mad's type sleeper
would anyone think this would be a problem?

2nd off.

i will be making this out of aluminum
it will be a direct drop in for all frames listed
m90
inteli frame
z-grip
** Dye Ultralight Frame.
*RPG chimera
*RPG triton
*logic
*powerlyte grip styx
*y-grip
Single trigger?
any others you can think let me know, and ill add them to the test platform.

this will use either a delrin ram or a SS 1/4'' ram, not sure yet.
i may use magnets instead of any type of springs. still not sure on that.
i figure magnet less bind?:)
i may use a delrin trigger rod not sure yet.

let me know your thoughts.

these will all be hand made with my machines and hands and tested(NOT outsourced.).
im thinking of trying to do a few newer internals.

any machinists out there that have any and all input on this feel free to criticise and such. or support, suggest, what have you.

anyone else feel free to do the same.

oh and let me know your interest.
thankyou,
KNM.

[vf-xx]

Whatever you end up doing make units first, then sell. No pre-orders.

[Frizzle Fry]

Whatever you end up doing make units first, then sell. No pre-orders.

+1

I'd probably buy one if it fit a Powerlyte frame.

[knownothingmags]

yeah no preorders here.
ima just make on request.
of course ill make sure this is tested.

ill make them as long as i can stomach the repeated work.
so once i get the nitches worked out ill start producing.

Fry:
powerlyte.
mag frame or moded to a mag?

[Frizzle Fry]

yeah no preorders here.
ima just make on request.
of course ill make sure this is tested.

ill make them as long as i can stomach the repeated work.
so once i get the nitches worked out ill start producing.

Fry:
powerlyte.
mag frame or moded to a mag?

Powerlyte GripStyx mag frame.

[bbotts77]

I might be interested in one if the price is right (or I have money) when you have some made.

[OPBN]

I would think there would be a fair amount of interest as long as they were tested and endorsed by someone well known here. You also have to take into consideration that some people on this site may still be waiting to get their gear and/or money back from Zap.

As always, pricing is a big factor as well.

[knownothingmags]

You also have to take into consideration that some people on this site may still be waiting to get their gear and/or money back from Zap.

As always, pricing is a big factor as well.

yeah i was thinking about this issue.

working on getting one started tonight for test runs.

[OPBN]

I also didnt think this was a hand drill/dremel job. I thought some machining equipment was necessary for a good product? I had one of these for a short time and the miling seemed pretty precise, not something I felt capable of doing. I also never quite understood how it really worked though, so that might have been part of the problem.

[knownothingmags]

I also didnt think this was a hand drill/dremel job. I thought some machining equipment was necessary for a good product? I had one of these for a short time and the miling seemed pretty precise, not something I felt capable of doing. I also never quite understood how it really worked though, so that might have been part of the problem.

oh yeah the hand made part is in turn i will be using my machines to make them.
sorry didnt specify.
i will not be outsourcing this product.

[Ando]

Actually...He made these by hand if i'm not mistaken. A drill press and brass stock.

[Imasho]

I would be down for 1

[knownothingmags]

yeah i intend to use my press , blade runner and aluminum blocks and ss rod, taps, files etc.

[TimmyJay]

I am interested in knowing more as I'm not familiar with this mod. I have a Triton frame that I may be willing to send as a tester. Please post more details or a design.

[Ando]

All the info you need

http://automags.org/forums/search.php?searchid=3881307