How to jerry rig your 90 warp elbow onto a vertical feed
well i get my 90 degree warp elbow in the mail and even though im already late for work i can see that it wont fit. in other words... there is a male adapter and a female adapther on the 90 and the male is used for the hose. that leaves female on female
well i get home from work and i set to jerry rigging it.
To specify this is for those vertical feeds that have the elbows combined with the feed
first i put the hose to the female side instead of the male side. what you do is you tae some scissors and cut a .75mm slot 1 inch long into the hose. tht makes it fit into the female end (you may have to take out the screw and then put it back in afterwards.
then that left the male (90) to female (gun). i had a spare plastic elbow laying around and found out rather quickly that the male end fit prefectly into it. so i took a hack saw and chopped off the end i needed. then for the hard part. i used sand paper but it took some time... take the chopped elbow that fits on the 90 and sand it down to the size of the vetical adapter.
thats it. it only took me 4 hours and 6 blisters to do this but it wasnt long cause was talking to footemps for most of it. ill post pics of the finished product later.
well i get home from work and i set to jerry rigging it. To specify this is for those vertical feeds that have the elbows combined with the feed
first i put the hose to the female side instead of the male side. what you do is you tae some scissors and cut a .75mm slot 1 inch long into the hose. tht makes it fit into the female end (you may have to take out the screw and then put it back in afterwards.
then that left the male (90) to female (gun). i had a spare plastic elbow laying around and found out rather quickly that the male end fit prefectly into it. so i took a hack saw and chopped off the end i needed. then for the hard part. i used sand paper but it took some time... take the chopped elbow that fits on the 90 and sand it down to the size of the vetical adapter.
thats it. it only took me 4 hours and 6 blisters to do this but it wasnt long cause was talking to footemps for most of it. ill post pics of the finished product later.
! We love to SEE what yer talking about :)
Comment