Tippmann Carbine w/ Warp.
I hooked up a Warp to the Carbine not too long ago to see how it would perform. I ended up playing the entire day with Yipe and a bunch of other people from the place he works and the gun performed near perfect. Only thing I noticed was a few times two balls would come out in one cycle. The Warp is probably putting enough force to get two balls in the chamber at times, so I'll try setting the dwell shorter and a new ball detent. But in terms of general peformance, the gun never broke or chopped paint. I put this on the Carbine to show people that the Warp isn't all about speed. You can have an inexpensive semi and you'll still see improvements using a Warp, because of the smaller profile, reliable feeding and the ability to fire the gun in any position. Only thing I had to modify to put the Warp on the Carbine, was dremeling off the clamp part of the 90 degree adapter so I could slip it in the feed elbow on the gun. Other than that, it all bolts right on. I also used my 3k Flatline system on the Carbine, since I have the 4.5k Flatline on the MiniMag now.
Here's the Carbine:
Here's the Carbine:
Problems or questions with the site or your account? Email me: 
.
Comment