building a new marker

[mag21]

I was thinking bout building my own automag.
I have $500. Im new to this so what should i do?
i was looking around and i want to put a y grip on my mag and use the ule mainbody.

[mag21]

actually, i really dont care for the internals in the gun rightnow. all i want my marker to be is a vert feed automag with a intellifeed frame or sumthing like that.
And how the heck are you supposed to put the marker together. can somone tell me exactly what i need to build a automag??? Im so confused. i want a tiniest of details.
thanks alot

[personman]

500 could probally get you an Xvalved Automag, but if you still need a tank and hopper for that I think your gonna have to stick with a classic.
You need a:
Valve
Mainbody
Sear Pin
Body Rail
Bottom ASA
Front Frame Screw
Sear ASSY
Field Strip Screw
Y-Grip (or any other Grip Frame)

And it will end up coming out like this.

Just add barrel, drop forward, air hoses, and you need some screws for the bottom line.
Also, if you really want a foregrip you can get this
Vert ASA
Gas Thru Foregrip

[gamarada717]

Well, It's not that difficult to build a mag. Get your grip frame. It should have a sear coming out the top of it. Put that into the rail. Then put the body on the rail. The valve and bolt goes in next, by sliding it into the back of the body. By the way, you should have already put the front grip frame screw in when you put the body on (I think). Then get your back grip frame screw or the "field strip" screw, and put it through the grip frame, rail, body, and valve. Attach your barrel, add a foregrip if you want, screw on your drop to the bottem of the frame, an asa onto the drop, add your connections and hoses from the asa to the valve, and get to shootin. I may be wrong since I've never completely dissasimbled my mag, and I've never built one, but I'm pretty sure that I'm right. Good luck, and remember, half of a marker is making it look sexy as hell.

[mag21]

thanks guys. took some stress off my shoulders. btw i already have a tank hopper and all the other stuff.
thanks again!

[personman]

Also dont be afraid to buy used. You can get a used Xvalve for like 215 or something like that. Just shop around.

[nato]

If you are good enough of a bargain hunter, you should be able to find an emag... maybe more like 550. Otherwise... May you go forth an build the mag of your most wild dreams!

N.A.T.O.

[Mistr_eX]

ok, buy a used mini-lathe and make all the pieces yourself. then not only will you have the cooloest mag ever, you will be able to make big $$ making custom parts for other people

[Coco Savage]

help with my rebuild..

sorry to bother anyone..

but does anyone have spare grip frame screw and field strip screw to hook me up? I need spares and dont feel like paying retail on airgun.com

sorry if this is off topic..thanks

[UltimatePaintballer]

i would say.....

tko package= $260
Ule Body= 150
Then get a 90
used intelliframe

That all equals 500 after that save up for an xvalve and maybe a y grip