HO LEE COW thats NASTY!!!

[need4reebs]

Oh hells yeah...almost finished with me Summer project! will be testing it out with a Pneumag, Mech, EP and Pump set up! the pump set is what i would really like but um...we will see???



Does anyone else do pump milling???
Moving forward with the Nasty Mag, got the Spring feeds ready and getting a lil Mod done that should be complete pretty soon? Didnt wanna let another Nasty Mag thread dide like all the rest so here are some updated pics:

the Spring feed:



and the Nasty Mag:

[ochsy]

Wow thats awsome, need a vid of it shootin. I think you may need a bigger tank, maybe scba would power it for a little while.

[1stTarget]

When you do the video: Star Wars Death Star theme.

[zondo]

So that's where the reverse X went...

[going_home]

[need4reebs]

i would like the option? this is a build that me and a friend who passed away talked about building! a Nasty mag that could be used as a mech, pneumag, EP mag, or a pump


maybe it will happen...maybe it wont...but im gonna have sum fun finding out!!!

[Justus]

Make it pneumag. Then remove the Q-loaders and attach dual 12v-mod warpfeeds with rotors. Mount it in the back of a truck and have it powered directly from a regulated bulk air tank. Put 10 cases of paint in the back of the truck too. Call the truck a "tank" and show up at the next local scenario. Then, watch as all the other players go to change their shorts.

You may need to take out a small loan to make that happen though.

[sQuidvision]

Cool! Is it a custom rail or two rails with an adapter? Either way that's super fun looking!

[NU_METAL]

Cool! Is it a custom rail or two rails with an adapter? Either way that's super fun looking!

http://www.vm68.com/stuff/dual_mag.html

or

http://www.vm68.com/stuff/dual_mag.html

IT would be so cool if you could double the outlet on this somehow !

http://pbstar.com/2011/08/16/valken-strikeforce-loader/

[need4reebs]

http://www.vm68.com/stuff/dual_mag.html
or

http://www.vm68.com/stuff/dual_mag.html

IT would be so cool if you could double the outlet on this somehow !
http://pbstar.com/2011/08/16/valken-strikeforce-loader/

if you could use these fittings where the hose comes out then you will have 2 hose to feed the Nasty Mag...shouldnt be that hard unless the loader cant push that much paint???

http://flexpvc.com/cart/agora.cgi?cart_id=1805186.28653&product=PVC-Wyes_TrueWye

[NU_METAL]

if you could use these fittings where the hose comes out then you will have 2 hose to feed the Nasty Mag...shouldnt be that hard unless the loader cant push that much paint???


http://flexpvc.com/cart/agora.cgi?ca...C-Wyes_TrueWye

Yeah my thoughts exactly !
two thoughts i had,even if you can find a "T" fitting (you did) Would the "Carousel" type bottom portion of the loader handle the load once its increased due to doulbe the work

Id love to see one of these apart so i can turn the wheels inside this head

[sQuidvision]

i have a hard time believing that just adding a y fitting would split the paint cleanly from one hose to another without causing a jam-tastic headache... i hope i am wrong though... because that would be super cool!

[wetwrks]

i have a hard time believing that just adding a y fitting would split the paint cleanly from one hose to another without causing a jam-tastic headache... i hope i am wrong though... because that would be super cool!

Would be based on where the Y is. Basically you have to get it measured just right that when the ammo is loaded up to one side the balls can then feed off to the other side.

[need4reebs]

i have a hard time believing that just adding a y fitting would split the paint cleanly from one hose to another without causing a jam-tastic headache... i hope i am wrong though... because that would be super cool!

yeah me to...it does seem like a better option than a standard t-fitting...but time will tell...so only thing i can do is try...of course i cant try it on the back pack loader...but im looking towards buildind a box mag anyway so testing can start there!

again this is all for fun, and mainly to see if i can do it...so im not really too worried about!!!

[need4reebs]

Yeah my thoughts exactly !
two thoughts i had,even if you can find a "T" fitting (you did) Would the "Carousel" type bottom portion of the loader handle the load once its increased due to doulbe the work

Id love to see one of these apart so i can turn the wheels inside this head

a T-fitting seems like too harsh of an angle??? maybe vaulken paintball has pics of the internals in the manual to look at...or if you were to call and check with the techs to see if they tried something like that???