Help might have a big problem
Hey all supper newbee here once again.
Ok i put about 500 rounds of paint through my gun.
Took the tank off, cleaned it up like a good boy.
The next day i get it ready to play and i am testing it out to make sure it is top notch, I pull the triger and i shoot one ball then i hear a hisss sound then i pull the trigger again and it shoots fine for a bit then a hiss sound again so i stop. I take out the bolt and have a bit of a time getting it off. I notice on the bottom of the bolt the brass thingy is sticking out and i can see a white O ring. I go Ohh my what the @#$!. So i get a pair of pliers and a wash cloth so not to mark up the bolt and try to push it back in. It goes in fine and I put the gun back together again and i hook my tank up and pull the trigger and nothing at all. I went back through and reput the bolt back together and nothing at all .
HELP HELP HELP :eek: :eek: :eek:
Silador
New X-Valve and Lvl10 setup
I have a new x-valve that I am trying to get setup. I have the 2 carrier in it with no shims and the fit seems to be good but I am still getting significant leaking. What's odd is that the leaking goes away if I keep pressure on the trigger. Also if I attempt multiple shots without keeping pressure on the trigger then there's a lot of chuffing. If pressure is keep on the trigger then it shoots quite well. I can also only get the smallest spring to work, all others result in no firing at all, even with the pressure turned up until it leaks out the back.
Ideas?
having problems with a mag
hey guys
i have a mag with a hyper frame and a level 10 kit, the problem is that the marker always shoots 2-3 shots per trigger pull ??????
hope someone can help
New RT ULE Custom - leak left hole
Ok, this is my first mag so I maybe I missed something, but I hope ya'll can help this noob mag owner out....
I received the mag directly from AGD on wednesday, but didnt have any air to gas it up with till thursday. Well, when I got home thurs after getting a fill, all i hear and feel is a leak coming from the left side hole. Ok, so I left it gassed and tried to turn down the velocity, well, I tried turning the vel adjuster, placing the allen wrench all the way in and turning, no luck in it budging. Since that was not doable, i degassed it and started to oil the components of lvl 10, 4 -6 drops into the asa, oiled the vel adjuster hole....no luck.
Edits:
Setup:
Stock RT ULE Custom
ULT
Dye 71/4500 preset 850
End Edit
Any ideas suggestions before I take it to paintballmaxx to have Brad look/fix it, hopefully it's just my idiotness.
Thanks in advance,
Ken