max-flo reg help

hi, just quick questions about the SmartParts MaxFlo regulator (Tank reg)

whats its min/max output pressure?

difference between 4.5k and 3k? (other than the air capacity...)

any other tank can be used with it, or need a specific tank?

tnx, the faster the better... my mag is asking for a adj. regulator :shooting:

just want to hit maximum tuning to make it as silent as possible, and also for RT (by changing output pressure).

Any tank will work. The threads are standard threading.

The min/max output pressure depends on the spring kit and piston that is installed. There is a high output version and a low output version. The high output version works great for mags, but the low output version won't allow you to get to high enough pressure. Its not just a matter of changing the piston and spring. The back section is changed as well, to accept the smaller diameter piston for high pressure operation.

I don't think there is any difference between the 3k and 4.5k versions other than the safety pressure reliefs.

Quote:

---

Originally Posted by athomas

The min/max output pressure depends on the spring kit and piston that is installed. There is a high output version and a low output version.

---

theres a high and a low version for all 3 versions, right?

sorry for bugging to much, just want to make sure I ask the right questions before buying one.

thanks :D :bounce:

Check this out:

http://www.zdspb.com/tech/mguide/regs/comparison.html

http://www.zdspb.com/tech/mguide/regs/faq.html

Quote:

---

Originally Posted by athomas

Check this out:

http://www.zdspb.com/tech/mguide/regs/comparison.html

http://www.zdspb.com/tech/mguide/regs/faq.html

---

thanks!

thank you guys!:headbang::clap::headbang::clap: