Can anybody here mill an ion frame to fit up to automag rail?
Printable View
Can anybody here mill an ion frame to fit up to automag rail?
they flush fit without to much trouble, just make a new front frame screw hole...
(super_stanchy)
http://www.youtube.com/watch?feature...&v=SPbQzj9ejBA
OR...
(Robertsr)
you could hide a full automag inside an ion body/frame for an ultimate sleeper
http://www.mcarterbrown.com/forums/d...y-got-ion.html
or you could do what i did and drop a hacked up rail into a broken ion
http://i1325.photobucket.com/albums/...ps00f18031.jpg
http://i1325.photobucket.com/albums/...ps984ebe45.jpg
don't have one of the two parts together but i'm sure you can line the cuts on the frame with the rail...
THANK's keep the ideas comingQuote:
Originally Posted by rukh013
I'm familiar with stanchy he's just super busy with stuff so I may do it myself just wondering if there was a how to guide? But I'm sure I could just match up rail holes mark it and go from there.This is a mock up of my project phase one I still need some parts
http://i1083.photobucket.com/albums/...psyeaa7nnz.jpg
Are you thinking pnueMag for this project?Seems pretty doable.If you can find an aftermarket Ion frame for cheap they may be better,most have alot more space inside,the NDZ Scorpion frames a huge inside compared to stock ones.
If you need any measurements of anything PM me,I've got a ton of Ion stuff
My intent exactly was to do a pneumag down the road pm inboundQuote:
Originally Posted by punisher068
This is the frame I plan on putting on my mag
http://i1083.photobucket.com/albums/...pswln2byhi.jpg
PM replied,sorry no Epif frames
Any reason the mech 3way on a pnueMag can't be replaced by the Ion solenoid 3way?
Getting closer waiting on rail to get back from luke...
http://i1083.photobucket.com/albums/...pse5dplta5.jpg
you should mount the sear in the frame and skip the rail.:p
I was looking at that possibly but I have to make sure it will work geometry of on off pin length trigger sear etcQuote:
Originally Posted by magman313
Ok so qloader or bt rip clip to feed this need opinions
It's coming together nicely I think?
http://i1083.photobucket.com/albums/...psuro1mrhh.jpg
A little update
1.custom rail to match length of epiphany frame at the front
2.moded frame to fit
3. Shortened sear pin
Put air to it!!!!
http://youtu.be/vRtiYFAMjpU
is it comfy?
Berry comfy!Quote:
Originally Posted by knownothingmags
Next is either rt or ult on/off to lighten trigger pull a bit
Or I may just purchase an Xvalve with ult and level 10 from tuna
are you using 10 rnd tubes? :confused: I see the sc feed gate
Just for testing purposesQuote:
Originally Posted by magman313
http://i1083.photobucket.com/albums/...pso6cpf3y3.jpg
http://i1083.photobucket.com/albums/...psnvprabz7.jpg
I love it! I was thinking about adding an intelli frame to my mag but this caught my eye. When you mentioned milling the rail, was that just for esthetics to match the epiphany frame or for mounting purposes (aligning the front frame screw location)? How did you modify the sear pin (i.e. how and what is the new length)?
Thanks man.Quote:
Originally Posted by 1985phenom
Yes I said milling because at that point it was just a thought of building this and I didn't know what was needed so I was seeking information. All I did was buy the epiphany I mocked it up with rail and body and drilled a new frame screw hole bought some longer screws at Home Depot cut them down to size.
I got the sear mod from Luke's customs and I shortened the sear pin by twisting the threads so that there is a small gap between trigger and sear pin when gases up. I also sent my frame to Luke so he could make a rail to match length of trigger frame.It shoots great asa leaks at npt threads of macro and 10 round tube was just for testing I'll be picking up a hopper soon.
http://youtu.be/eFL_tXA-loo
Did the revi warp mod the gun is complete!
http://i1083.photobucket.com/albums/...pssvvxhsot.jpg
http://youtu.be/L5TfUPDaoPw
http://i1083.photobucket.com/albums/...psng5cu4au.jpg
Pardon the ignorance but what is the angled “drop kick” “C” shaped ASA adapter that you are using?
It's custom I picked it up on MCB Rick had 3 I got 1 need4reebs got2Quote:
Originally Posted by 1985phenom
Update Xvalve lvl10 ult kinda walkable! I have to fine tune it a bit more
http://youtu.be/rM0xo177fMM
pretty freaking cool.
new stuff is always nice.
Thank for this video I swapped on/offs this is rt on/off not sure of pin length haven't measured it yetQuote:
Originally Posted by knownothingmags
http://youtu.be/AYjse600zns
:wow:
now that's awesome.