Just picked this up on ebay..did I do good.

Printable View

02-23-2012, 04:23 PM
birdinator

Just picked this up on ebay..did I do good.

I just picked this up on ebay. It has everything I want.
Did I do good on the price?
http://www.ebay.com/itm/ws/eBayISAPI...vip=true&rt=nc
02-23-2012, 04:34 PM
skipdogg

Quote:

Originally Posted by birdinator

I just picked this up on ebay. It has everything I want.
Did I do good on the price?
http://www.ebay.com/itm/ws/eBayISAPI...vip=true&rt=nc

Yes. Enjoy!
02-23-2012, 04:34 PM
Automag ReTro

Looks like a pretty solid pickup to me.
02-23-2012, 05:04 PM
TimmyJay

I think you came on here to brag...good find and the only bid. Must have caught a BIN price. If you find out that you don't like it, let me know. :rofl:
02-23-2012, 05:07 PM
mpsd

Nice catch, indeed. Change the feed-neck, install a decent on/off and you are good to go.
02-23-2012, 05:17 PM
birdinator

I promise I did not post this to brag ;) With so many different setups that you can have done on an automag, I wanted to make sure that I jumped on it at the right moment. It had a starting bid of $250 or a BIN of 310 plus shipping. To me it had all the right parts so I jumped.

It is hard to change the feed neck? You have a link to one I should buy?
Another questions, 22" sniper barrel...does it really work? I can see myself selling that off.

Right now in the last 3 months i have collected:

68 Classic
Classic Automag Pump
And now this piece...And I still want more, but I am running out of money.

Thanks for the help :cheers:
02-23-2012, 05:29 PM
usmc8892

nice! I got bit by the bug myself when I found quite a few automag parts in my garage so I have been scouring ebay and the classifieds here to make it whole again.
02-23-2012, 05:32 PM
Ando

Quote:

Originally Posted by birdinator

And I still want more, but I am running out of money.

You'll make more next month ;)

Give the redonkulus barrel to some Mil-Sim knucklehead. All you need is a 12in with a good control bore. Anything past 14 is just for looks
02-24-2012, 08:38 AM
birdinator

Quote:

Originally Posted by Ando

You'll make more next month ;)

Give the redonkulus barrel to some Mil-Sim knucklehead. All you need is a 12in with a good control bore. Anything past 14 is just for looks

Walking around with that barrel, I would feel like the Joke from the movie Batman!

So would would be the next gun to add to my collection? RT?
02-24-2012, 06:48 PM
sjrtk

If you are interested in selling that barrel i am interested in it for a project. PM me and we can talk.

Also yes you did come out good on the buy.
02-24-2012, 07:11 PM
mag79

Great find. I think the misprint kept some of us from seeing it.
02-25-2012, 01:42 AM
Henchman

Great price.
Great deal.
02-25-2012, 03:14 PM
dahoeb

sexy mag! have fun!
02-25-2012, 05:35 PM
birdinator

Thanks! I will let you know when I get it.
02-29-2012, 07:11 PM
birdinator

Got the marker yesterday and like anythimg you buy used, you need to address a few things.
The ASA I guess is cross threaded. I screwed in my tank and right before the last turn to tighten the tank, it started to leak from the ASA. Pulled the tank, and found the O-ring on the air valve was sliced up. Put a new o-ring on and same thing happen. Switched out the ASA from my other Mag and solved that issue. I just need to buy a new ASA.

The second issue is that from time time and the best I can descibe it, the valve will not recharge. The trigger will not reset, it will hang up for a second or two and you hear a little air leak.

Any advice or should I post this to the tect forum? I am thinking O-ring kit.
02-29-2012, 07:27 PM
mpsd

Quote:

Originally Posted by birdinator

Got the marker yesterday and like anythimg you buy used, you need to address a few things.
The ASA I guess is cross threaded. I screwed in my tank and right before the last turn to tighten the tank, it started to leak from the ASA. Pulled the tank, and found the O-ring on the air valve was sliced up. Put a new o-ring on and same thing happen. Switched out the ASA from my other Mag and solved that issue. I just need to buy a new ASA.

The second issue is that from time time and the best I can descibe it, the valve will not recharge. The trigger will not reset, it will hang up for a second or two and you hear a little air leak.

Any advice or should I post this to the tect forum? I am thinking O-ring kit.

I'd say verify your on/off o-rings and give it some oil. That's where I'd start from.
02-29-2012, 07:45 PM
Henchman

Oil the level 10 powertube and carrier o ring. That's most likely it
03-01-2012, 09:57 AM
birdinator

Thanks! I am going to search out a video on it.
03-01-2012, 10:13 AM
OPBN

Fiddle with your field strip screw. You would be amazed at the issues having it too light or too tight can cause.
03-01-2012, 01:15 PM
birdinator

Quote:

Originally Posted by OPBN

Fiddle with your field strip screw. You would be amazed at the issues having it too light or too tight can cause.

Should I do it hand tight or hand tight then a 1/2 turn with the allen key?
03-01-2012, 03:24 PM
sjrtk

Quote:

Originally Posted by birdinator

Should I do it hand tight or hand tight then a 1/2 turn with the allen key?

Hand tight and just snug with a allen works for me. But every one is different.
03-01-2012, 03:59 PM
OPBN

Quote:

Originally Posted by sjrtk

Hand tight and just snug with a allen works for me. But every one is different.

Seems to vary from marker to marker. I have one that when the marker is not aired up, the valve actually wobbles a bit. Another one, I have to do a 1/4 turn or so. Do it finger tight and air the marker up. If it is resetting and cycling fine, leave it. If it isn't resetting, try tightening a little until it resets. You may have to loosen it.
03-14-2012, 08:02 PM
birdinator

I finally got the chance to disassemble the valve, clean and oiled it up.
I think it fixed the problem. Walked the trigger and had no issues. :dance: