Originally Posted by smartfarts
Help Iv been trying to get my Xvalve to work right for some time now, with little success. Nothing seems to be wrong.. on/off in good shape, reg great.. it must be the lvl 10.
I Have the 2 lined carrier in, which is the largest it will get without leaking. I have 2 shims and the shortest spring (short brass, med. red, long silver). When i pull the trigger it shoots fine and has moderate anti-chop. The problem comes when trying to shoot anything faster than 2 bps. It kssks and the trigger becomes stiff. When i hold the trigger down all the way and release it slowly i notice that the bolt has to move forward some to get caught by the sear and reset. Well this forward movement is screwing over my rof. See when listening to the mag operate I hear the "SHOT" then shortly after a "ding", which i assume is the sear catching the bolt. But there is quite some lag between these two. I also noticed a few shots out of each set do Not have reactivity. Help me pleaase!! Iv tried fumbling with the reg pressure all day but i cant get over this problem. Nobody with decent knowledge around me, so i rely on you guys.