Quote:
Originally posted by the electrician
warpedside671- thanks alot. yeah punisher's stuff is beautiful, and I'm sure it performs great. my stuff is basic performance orientated mods like you said.
the valve shroud is just a piece of aluminum tubing, cut at a 22 degree angle on the back, and a portion sliced off the bottom. just enough for a tight fit. then a slot is made for the fitting on the side. I originally made it for looks and found that it helped disipate cold off the valve back when it ran on co2, not much of a difference, but a little. glad you like it.
Digit- you're funny. define "hard to program". my idea of hard to program and yours, might be a bit different. but really it's easy. you don't need to know hexadecimal or BCD code or anything. you're not actually going to "program it", your just setting the timers. have you seen the instructions on their website? basically it is set to a default mode. to set the timers to what you want you just hold the trigger down while you turn it on, then release the trigger. now it's in "program mode". follow the instrucions, it's all done through the trigger. single solenoid guns(open bolt guns mostly) are really quick and easy to set-up.
once you've done it you'll see its really nothing at all.
you'll start to memorize what order the registers are in and how to change the timers.
Sounds good :)..