New E-Mag/X-Mag board!!!!!!

REFLEX PAINTBALL CUSTOMS
E-Mag/X-Mag Board

This is a completely new board that will replace the no longer available OEM boards

The board is a “drop in replacement” product (take the old one out, drop the new one in. Save all your old electronic parts.NO SOLDERING!!!!)

We made some changes to the current design to make it more up to date

The New Main Board Supports the following features:
A New ACE board (will be ready for Tunaball 6!!!)
Break Beam/Bounce Beam Eye Systems
New HES trigger
Use the rear button as a power switch
Use the rear button as a mode/eye switch
Multi-color LED (no LED Screen)
AUX/Warp Feed Port
Solenoid Port (you can unplug your solenoid)
Power Port (you can unplug your power cable)
Solenoid Polarity Correction

The R.P.C. E/X-Mag Boards come pre-loaded with our Reflex 7.0 software.
With our advanced code driving your new board, you will push your AGD marker beyond its limits!

Reflex 7.0 Code supports:
(13) Fire modes = Semi (uncapped), Semi (capped), Auto Response, "Mild Ramp", "Max Ramp", "Z-Burst", Full Auto, CFOA, Millenium, PSP Auto Response, PSP Ramp, PSP Burst, NXL
Adjustable Trigger Debounce (checks trigger noise levels)
Adjustable Dwell (adjustment for your solenoid)
Adjustable Anti-Bolt Stick (adjustment for the bolt system)
Adjustable Ramp Rate (percentage of how fast to get to ramping modes)
Adjustable Ramp Start BPS (how fast you have to ACTUALLY shoot in order to start ramping)
MROF (the max rate of fire your marker will shoot when the board is turned on)
Adjustable Burst Value (works with "Z-burst" and "PSP Z-Burst". Changes the number of shots)
Eye Off ROF (the rate of fire you can get when the eyes are dirty or malfunctioning)
Eye Type (Break Beam or Reflective/ACE)
Adjustable Mechanical Debounce (checks marker noise levels)
Reset to Factory Defaults

When you Purchase a New Board it comes with:

(1) New R.P.C. E/X-Mag Main Board with Reflex 7.0 software
(1) New Power Cable (connects your battery to your board)
(1) New HES (the trigger switch)
(1) New Solenoid Coil (connects to your new board with connectors so you can remove it)
/
Optional Equipment Service Purchase:

A new Warp Feed Cable (made for both Left & Right hand shooters) = $15
A new ACE Board and Cable (ready for Tunaball 6) = $?????
A Complete Board Installation to your AGD lowers (you send in your lowers. We remove all your existing OEM electronics and install the new electronics for you) = $50
New/Upgraded Software Flash = $25
Custom Code Modifications = PM me

We are making 100 boards in the first run

We have set a price of $189 (shipping and insurance NOT included)

How to Purchase:
Contact me via PM.
Payment in the form of "Personal - Gift" via Paypal ONLY
Minimum $100 non-refundable deposit required to reserve your place on the pre-order

Purchase & Shipping Information: (copy this into your PM AND YOUR PAYPAL NOTES and fill the information out)
Your AO Name:
Your First and Last Name:
Your Paypal Shipping Address (the address on your paypal account where you have items sent to)
Your Shipping Address (the address we are sending the board to; can be different than the address above)
Your Phone Number (xxx-xxx-xxxx)
Your Paypal E-Mail Address (the one registered with Paypal)
Your E-Mail Address (if different from the paypal e-mail address)
Payment(s) Sent: (we would like the buyer as well as us keeping track of all payments sent to avoid any confusion; include amounts and dates)
Payment Form: Payments MUST be sent as a "Personal - Gift" to: jjai@comcast.net

VIDEO!!!!
This is the first video
Shot with the board on 18bps semi auto mech R/T bounce. The paint was All Star that was 2 months old and it was 53 degrees.
<iframe width="420" height="315" src="http://www.youtube.com/embed/gb2FFcwA1P8" frameborder="0" allowfullscreen></iframe>

This is the second video.
Shot with the board on 18bps full auto no R/T bounce, straight e-mode. The paint was breaking in the air (6shots) and one in the barrel. The paint was All Star that was 2 months old and it was 53 degrees.
<iframe width="420" height="315" src="http://www.youtube.com/embed/Z3Fi1gwH89U" frameborder="0" allowfullscreen></iframe>

This is the third video.
You can see the internal AUX port (warp feed link) which activates the warp feed every shot for the duration of dwell set by the jumpers on the warp feed board and not just the settings on the main board. The gun was in full auto at the time. I tested it in semi and got the same results.
<iframe width="420" height="315" src="http://www.youtube.com/embed/z3ndwTGpqj8" frameborder="0" allowfullscreen></iframe>
Note: Ive done some surgery on my warp feed YEARS ago (at least 5 since this is the one I used at TB1) which includes an 18v mod, upgraded battery snaps, and some switching relays to speed up the motor. All of which are external to the warp feed main board and do not alter the link between the gun and the warp feed.

Battery Test After 30 Days #1
<iframe width="420" height="315" src="http://www.youtube.com/embed/zFaPhZPeQr8" frameborder="0" allowfullscreen></iframe>

Battery Test After 30 days #2
<iframe width="420" height="315" src="http://www.youtube.com/embed/eTFlj-lMuUo" frameborder="0" allowfullscreen></iframe>

The List:

1 - P8ntbal4me
2 - BigEvil
3 - Ando - $320 (paid $320 for two boards on 7/13/2012)
4 - zondo = $160 - 9/5/2012
5 - splat15k - $160
9 - Ratt - $160
6 - Imasho - $160
7 - GVMV - $100
8 - mrairman - $160
9 - Chris - $160
10 - robander3 - $160
11 - Tropical Life - $100
12 - weekendballer - $160
13 - Emil- $100
14 - Emil - $100
15 - tolar250 -$160
16 - RST - $160
17 - Hellrox - $160
18 - rukh013 - $150
19 - PanzerGen - $100
20 - promethion - $100
21 - knownothingmags - $189 - 9/4/2012
22 - knownothingmags - $189 - 9/4/2012
23 - bbotts77 - $189 - 12/27/2012
24 - reckid1986 - $189 - 2/14/2013
25 - Loguzzzzzz - $160 - 7/12/2012


Need payment from the following
19 - sjrtk
20 - 4rpp
21 - Swamp Thing
22 - IrishRedneck86
23 - Dirg
24 -
25 -
26 - Ruler Mark
27 - onecaribou
28 - Enhander
29 - fierymartel
30 - inkedballer
31 - Three Psycho
32 - pk5
33 -
34 - Predaator.
35 - motodrom16
36 - erebus
37 - ThreePsycho
38 - carapace
39 - ghost271
40 - eelz
41 - splatzone
42 - baby face
43 - BBS
44 - Paintball smurf13
45 - casanovaxl
46 - soulcoffin
47 - cyberkhan
48 - axis
49 - wileypb
50 - the meanstreak
51 - my automag
52 - mostpeople
53 -
54 -
55 -

OMG ITS BOB FROM TAG!!!! HOW DID YOU HACK JAI'S ACCOUNT!!! :p


Put me down for one for sure... maybe more. LMK when to send some $$


:cheers:

Oh, another thing.. how set in stone is the software at this point?

Quote:

---

Originally Posted by BigEvil

Oh, another thing.. how set in stone is the software at this point?

---

As sure as the Granite Quarry's are up here in NH.....

,.. and yes,.. everyone will be MOST PLEASED :)

I'll be down for a backup.

I'm down for one.

Quote:

---

Originally Posted by p8ntbal4me

As sure as the Granite Quarry's are up here in NH.....

,.. and yes,.. everyone will be MOST PLEASED :)

---

Wait, what happened to the old man on the mountain? :p

Are you still supporting the new HES?

Put me on the list...

me too

Please put me down for one as well. Thanks! :)

for one as I have a need.

Swamp

Count me in for one.

Count me in for 2 :cheers:

In for one.

I am down for at least one.

:cheers:

I'll gladly sign up for some new AGD love :D

Thanks p8nt :cheers:

Awesome! 13 names in just 2 days!

The list has been updated.

+1

Count me in for one.

Count me in! Will this board have different firing modes similar to the XMod?

Quote:

---

Originally Posted by Enhander

Count me in! Will this board have different firing modes similar to the XMod?

---

Yes. Typical things you find on an aftermarket board,....

I take one for my future Emag.

I'll take one, sign me up

I would take one.

19 names and still going,.... we need 50 to make production.

The details are not hammered out just yet on the new board as far as features.

All we really have are basics:

Will support the ACE
Will support the HES
Will accept the AGD power source
Will be a complete replacement for the OEM board
Will have New Code/Software

Details that are being considered:

Updated ports on the board from Molex to JST
Bundled with a new solenoid coil (body no plunger)
Bundled with new Ultra-HES
Bundled with new Power wires/harness
RF/Wireless Hopper/Warp Feed Connection
Building a new ACE board


Details that are not going to be seen:

LED screen
OLED screen
End user upgradable/flash-able software


Here is an interesting fact that will make some of you happy:

This board will not be owned by the company that manufactured them,... they will be owned by us (us being myself and my silent partner) (other than the code)
You will not have to worry about supply as we will be purchasing all BOM and Gerber files to make the boards. If we have sour dealings with a company or get a better price, we can walk away whenever we choose.
We made the decision to purchase the labor and design cost up front last week. I will say it is pricy,... but it will eliminate a huge problem down the road.

I am interested in one too, especially if the back button can be use as an on/off.

P8nt, can you talk about the details that are being considered (solenoid coil, ultra HES, etc.)? Are these somethings that we/you are pushing for or are cost limiting? What are the advantages of these over the present configuration?

Quote:

---

Originally Posted by zondo

P8nt, can you talk about the details that are being considered (solenoid coil, ultra HES, etc.)? Are these somethings that we/you are pushing for or are cost limiting? What are the advantages of these over the present configuration?

---

Bundled with a new solenoid coil (body no plunger)

This was being considered because of the connection of the current solenoid body to the OEM board IE: its directly soldered on. In order to add a nice new port for the solenoid,.. we need to either provide a pigtail with the board or a new solenoid coil.

Providing a pigtail means that you loose the "plug n play" factor. You also loose the 100% correct calibration of the solenoid. This however, is the cheapest solution to an upgrade board.

Providing a new solenoid coil means its a "plug n play" upgrade. Down side is that the cost will go up rather quick. The boards wont be cheap as it is..... look at what it costs for an OEM board and solenoid from AGD = $250.00

Bundled with new Ultra-HES

We may or may not change the ports from Molex to JST for the HES. Lots of guys are going to think that it would save cash to use the AGD HES,.. which from the go,. it would. You would run into a higher cost if you are one of those people whom do not know that AGD didnt have a color standard on the OEM HES,... making it impossible to write an accurate manual or support a product after it leaves our hands once purchased due to "operator error". Its easy to kill a board,... bundling it with a new HES we KNOW was build by us and the board will be designed for,... saves money in the long run.

Bundled with new Power wires/harness

We were thinking that most of you out there would ditch the OEM board (or Tuna will buy them all :) ) once the new board is purchased. With this in mind,.. we thought that making a new wire harness to work with the power supply would be best. This would be something with connectors that COULD plug into a ACE board if you decided down the road to upgrade your "guts" from an E-Mag to an X-Mag. This also relies on another possible bundles item,.......

Building a new ACE board

If we build a new ACE board,.. we jack up cost on everything about how the main board works with other parts. I think its safe to say that those of you whom JUST want a new Main board will not see a price hike in your board up front. You would see it in upgrades later on such as a new wire harness or something to add components later.

RF/Wireless Hopper/Warp Feed Connection

Pretty straight forward,... this would be the best thing ever to happen to a Warp Feed,.. save the next item we are working on :D

Quote:

---

Originally Posted by p8ntbal4me

Details that are not going to be seen:

LED screen
OLED screen
End user upgradable/flash-able software

---

So...are you saying that, instead of turning the marker on and seeing "Xmod 1.4 Beta" scroll across a screen, all I am going to see is different colored LED's?

Quote:

---

Originally Posted by Ratt

So...are you saying that, instead of turning the marker on and seeing "Xmod 1.4 Beta" scroll across a screen, all I am going to see is different colored LED's?

---

Yes. The LED screen is:

Expensive
Takes up a lot of usable space
Expensive to add in for hardware
Outdated as far as reasoning to keep it
Expensive to write code for


,.. expensive.

LEDs are just as good as anything else (besides OLED) and cut a lot of cost

i would prob want an ace