Got Mine Saturday.
Here is what was in the box, looks like it came with all the jumpers in place.
http://i520.photobucket.com/albums/w...psfwmrrr97.jpg
Printable View
Got Mine Saturday.
Here is what was in the box, looks like it came with all the jumpers in place.
http://i520.photobucket.com/albums/w...psfwmrrr97.jpg
are the amounts in the first post a balance owing or total cost to ship? Im just wondering because I did add some for shipping in my initial payment.
Jai, I've 2 questions :
1/ Are the board with woking "default settings" or do we need to parameter all the settings ?
The second option would be totally scaring for me !
2/ could you tell us the "recommanded settings" ?
Thanks
Amounts show for shipping is what I paid for shipping. If you over paid for whatever reason Before we shipped out to you, just relax a bit and wait for more updates. I would really like to get these out and gone so we can be done here.
You guys waited and forked over cash in good faith, the shoe fits on my foot too :-)
Setting:
Defaultly,... You gun will shoot a minimum of 15 BPS as the board comes (no eyes). Plug it in and go! If you want good results in a semi auto Scenario: I run my EMAGs with only one return trigger magnet and as short as possible to actuate in E mode. Then I run in hybrid. It makes the board shoot stupid fast!!!
REMEMBER!!!!! YOUR GUN MUST BE IN PROPER WORKING ORDER BEFORE SETTING THIS BOARD UP. The board fixes no gun issues!!!! Get your marker firing first, then install the board!!!
Thanks Jai.
That sounds perfect to me.
The Emag who's going to recieve the board is my Carbon Emag, and I just checked it : it's perfectly working in mech mod (batt is to low !).
With your board this thing is going to be a beasy ! light and fast !
I got both my boards yesterday and all jumpers are there. Also just sent money for shipping. That black pcb looks really good, to bad with my work schedule I wont be able to put them in a emag and test them out for a couple of weeks.
I sent $13.00 gifted to cover shipping when I got the board, just want to make sure you're aware :)
BBOTS
Your board is at fedex and is going to be sent back to me on Monday. I would call them to make arrangements to hold it or pick it up :-(
Picked up my board. Everything is there, including four jumpers.
Hey p8nt,
Do know the manufacturer number and brand of the LED? I'm considering buying a diffused lens to mount, unless you would recommend against that.
I've gotten stuff from here:
http://www.mouser.com/Optoelectronic...lor/_/N-8usfr/
got my three boards in,
everything is great.
sadly one will have to go to BST, since I now do not have use for one.
Shipping payment sent.
UPDATE
Looks like we are all caught up for now. Lots of guys need to make an AO return and get delivery and final payment settled.
At this point there are two of you on here that I owe extra equipment to. bbotts77 you are one......
I will be sending out parts this coming Wednesday via USPS.
Please look for them come next week and advise if not sayisfied.
PROGRAMMING:
The programming tutorial is lacking. If anyone needs help programming your board this weekend on Sunday I will be around all day (it looks).
If you have a iPhone you can FaceTime me and I will walk you through the process step by step to get you going. (We are setting up your board, not tuning your gun with air!)
If you don't have an iPhone, we can work over the phone and I will walk you through the steps.
I do, not without looking at my schematic or BOM. I had to buy them in bulk direct from factory.
Sorry it's so bright, i was thinking about guys with clear panels, solid panels ,.... I didn't want to have people upset over the color and brightness.
You are on the correct path to use a cover. Don't put anything over the LED directly (tape),...... Bad things will occur :-(
Let me get back into town and take a look. I will get you what you need
got my second board yesterday. all parts are accounted for, shipping payment has been sent.
Cool p8nt, thanks fo checking it out :)
No worries about the brightness. You're right, it works better for more setups. Plus multi diode LEDS was a great alternative to a screen, and brighter ones are usually better quality from what I've seen.
Now I just need to learn Morris code so off-field players can direct me while they're in programming mode ;)
Or use it to blind the enemy.... ;)
I suppose I could "frost" the little plastic window itself if I wanted. That may be they safest and easiest solution now that I think about it....
Mrairman:
Your board has come back to me from fedex.
Please advise on how you want me to ship again.
The board arrived today, with the 4 jumpers, hes and solenoid.
Now I've to install it...................
Thanks Jai
just as a friendly reminder if you are installing these into and empty frame,
instead of replacing a board, you will need the solenoid mount.
So...where are all the reviews?! After anxiously waiting five years for this product, I figured you guys would be chomping at the bit to put these boards through the paces.
Is it as advertised? Useful modes/features? Improved battery life? ACE Support? This thread was one of the few reasons I still visit AO. While I had no dog in the fight, I felt emotionally vested to see it to fruition/failure.
I love my 3,
they are perfect. just went and plugged and play, I have not messed with any setting yet.
I am 3D printing panels for the LED display now they are coming out awesome :D:clap::clap::clap::clap::dance::dance::dance::da nce:
Got mine today, with the 4 jumpers, HES and Solenoid.
Thanks Jai! :)
UPDATE
I am shipping this weekend. Anyone whom is ready to receive their board, EMAIL ME today at: JJAI@comcast.net
If you want your board,.... Email me!
maybe I missed it, but which plug is for the solenoid?
UPDATE
THE FIRST POST HAS BEEN UPDATED!!!!!!!!
Boards have shipped to the following:
SPARTACUS
ROBANDER3
GOIN5150
HELLROX
The following owe money for shipping of the first wave of boards:
4 - zondo = $160 - 9/5/2012 (address confirmed) (FEDEX - 780278651393) SHIPPING = $17.66
5 - splat15k - $160 (address confirmed) (FEDEX - 780278611632) SHIPPING = $18.13
8 - mrairman - $160 (address confirmed) (FEDEX - 780278653753) SHIPPING = $18.13 ** PACKAGE WAS NOT PICKED UP BY RECEIVER, SENT BACK TO ME **
balance owed for shipping first time, owes balance for new shipping label. CONTACT ME!!!
9 - Chris - $160 (address confirmed) (FEDEX - 780278601860) SHIPPING = $19.32
28 - flampaint - $189 - 1/24/2014 (address confirmed) (USPS - LZ314239765US) SHIPPING = $15.08
35 - smilestyler - $200 - 5/21/2014 (address confirmed) (USPS - LZ314239791US) SHIPPING = $9.50
The following owe money for shipping of the second wave of boards:
10 - robander3 - $160 (address confirmed) (USPS - 9407403699300008583178) SHIPPING = $12.90
17 - Hellrox - $160 (address confirmed) (USPS - LZ315606885US) SHIPPING = $15.08
29 - Spartacus - $195 - 4/14/2014 (address confirmed) (USPS - 9407403699300008583161) SHIPPING = $12.90
** NOTE **
I pulled this information from my paypal received history from 1/1/2015
If you feel I have made an error, please email me with the transaction date and correction so I may update your account.
SUMMARYJUDGEMENT;
Here is the LED info you asked for:
Make - "LEDTRONICS"
Part # - SML5050RGB1K-TR
Description - Red/Green/Blue Surface Mount LED
5.0 ×5.0 ×1.6 mm Chip LED
120° Viewing Angle
Spec Sheet - http://dl.ledtronics.com/pdf/Dstr0271.pdf
At the time, I had to purchase an entire roll of LEDs. I have more remaining if anyone wants to buy them.
paid...
Don't know why I didn't pay this earlier? :confused:
Jai, payment has now been submitted for the shipping cost.
Thanks again!
UPDATE
NEXT SHIPPING DATE IS THIS WEEKEND!!!! Get your emails to me so I can send your board out!!
Who has installed their new board? Who has used it??? Who has problems????
I would like to hear some feedback from you guys :-)
ACE board still in the works?