Oh yeah almost forgot, input pressure up at 1150 as always:D
-How long it took you to get it installed and what your configuration was to get it working properly
An hour and half all together because at first I forgot to play with the velocity and kept getting stumped on why it would leak ornot work at all, etc... Once i reread and printed out the instructions it probably only took about 10 min. to put it together...
-The type of gun you're using it on
Warp feed, left feed minimag, 68 c.i. 3k AGD flatline tank, Retrovalve
Not noticeable, but for once my valve went into runaway while w/o level 10 it never did
-Number of breaks/chops and type of paint used
0 breaks mixture of new diablo seconds and 8 MONTH old Team Colors (only ~250 rounds all together)
-Any problems you encountered
Didnt play with velocity settings during the "leak" testing steps, made a world of difference when I did
-Other general comments
Tom Kaye is a genuis just for adding a lil O-ring here and a little brass doo hickey there to make it not chop.
I took off the warp feed and used a hopper AND turned it off. It makes nifty hissing sound when it pinches