Offical LVL10, Reports from the Field
Before I get into all the specifics... HOLY $%*#... This is by FAR the best thing to ever happen to paintball. I took it to the Michigan Monster game, and the only time I broke balls was when I ran out of air, and on one of the last 10 shots, two or three balls loaded and were in the barrel, and the ball broke one of the others in the barrel. This mod ROCKS... The best $65 I've ever spent
OK, the details:
-How long it took you to get it installed and what your configuration was to get it working properly
It took only about 10 minutes for 1st install, around 30 min. total. I used the stock spring, 1 spacer, and the 3rd smallest carrier
-The type of gun you're using it on
Automag Classic powerfeed. Intelliframe, old Armson barrel, 68ci 4500psi nitro, viewloader revolution
No noticable difference
-Number of breaks/chops and type of paint used
NO BREAKS/CHOPS IN THE BREACH (see comment above)in 5 cases of paint total. We had 3 level X's and shot Diablo blaze, Zap crap, Nelsplat... a large range.
-Any problems you encountered
There were initial problems with the 1st set-up I had, but I went to a smaller carrier and back to the main spring and it runs great.
-Other general comments
Level 10, squegee not required
finally a good field test!
Here I am, probably a month after i had the Level 10 and just had my first real day of paintball, yesterday. after getting my problems w/it sorted out last time i went to the field, last nights experience was great.
time to install the first time----> probably around 20 minutes with everything in and about another 40 with the right velocity and tuning.
type of gun----> minimag AIR valve w/ intelliframe and flatline 3k tank at about 800 input psi.
efficency---> slightly lower then before, though havent really tested it
number of shots/ paint used----> at the park we use PMI premium. decent paint i guess. i didnt chop ANY of those. at my home, my good friend gave me a thousand Brass Eagle balls from when we started back 2.5 years ago. these things havent been moved or stored any where close to properly for those years. they ahve say in his room in they're original case. ill try and get a pic of some of these Brass Eagle balls i shot. i shot about 500 of those w/o a break as well. also tried to hang a ball into the breech to simulate a chop and it worked fine for about 25 simulated chops, then i guess it just gave up and the paintball got a little chop in its side. :[
~~~~ here are some pics of the crappy paint i used!~~~~
i had my fare share of them the first time out. velocity was a pain. this tiem out it was perfect velocity was at 260-270 so i just left it and had fun!
neato product. ADG and staff are great guys and thanks for making a great product. you guys are good at anything you do, tanks, guns, you guys should try to do a BARREL!!! i know you guys can make something that shoots straight!