Page 1 of 2 12 LastLast
Results 1 to 30 of 38

Thread: My new Shocktech Intimidator and old SFL Emag

  1. #1

    Thumbs up My new Shocktech Intimidator and old SFL Emag

    Well guys, as promised, here's a few pics of my guns:





    Pewter Shocktech Intimidator
    • Matching 14" .689 Pewter Dye Boomstick
    • Smoke HALO B with RipDrive and Z-Code
    • Shocktech Chrome Straight MiniDrop and On/Off ASA
    • Nitro Duck X-Stream 68/4500 Tank
    • WAS Equalizer Board v2.6
    • WAS Switch
    • Shocktech Bolt
    • Shocktech Ram
    • Shocktech Ram Cap
    • Chrome Lasoya Reg Housing
    • Chrome Lasoya Eye Covers
    • Chrome Lasoya Sideplates
    • Chrome Lasoya Trigger Guard
    • Chrome Lasoya LPR
    • Chrome Dragon Trigger
    • Chrome Torpedo Regulator
    • Chrome Clamping Low-Rise
    • Chrome Hybrid Volumizer
    • Bob Long MiniGuage
    • The WHOLE Body is done up in Stainless Steel screws
    • Dye Sticky3's







    Pewter SFL E-Mag #EM01569
    • 12" .689 Chrome-tipped Dye Titanium Boomstick
    • Clear HALO B
    • Aluminum JAVA Vertical Adapter
    • Dual Magnetic Kila-detents (raw)
    • Shocktech Pewter Long Drop with Chrome On/Off ASA
    • CenterFlag Hyperflow 68/4500 Tank
    • 3.2 Software with Shot Buffering
    • Level10
    • ACE





    Picture(s) of both guns:



    I also have a 10" .692 Large Bore Dye Boomstick and an All-Aluminum 12" Powerlyte Scepter that I may use on both guns.

    In the near future, I will be re-annoing that SFL Emag. For the Shocktech Intimidator, I am currently looking for a CP Chrome Adjustable Ram Cap, a CP Chrome Snatch-grip, and one of those new CP Chrome Clamping Rises or whatever they call them (hint hint dealers)

    Sorry for the poor quality of the pics; I will post better ones in a few days. I'd appreciate it if a few AO Photo buffs could give me some pointers because the guns' true colors are somewhat lighter and obviously those pictures don't do the guns any justice.

    Thanks for looking!

    -Ron
    Pewter SFL E-Mag #EM01569
    Pewter Shocktech Intimidator


    My Trading Feedback

    Extraordinary Traders:
    Johnny Bravo

    Good Traders:
    fcpchop, Xerces, Piccolo, hawpunch, Boble86, NCpaintballer, Chupas2, shrapnel, gump1119, Methos, PunkOff, TheFlamingKoosh, RogueFactor, Jonesie

  2. #2
    Join Date
    Apr 2002
    Location
    Mobile, Alabama
    Posts
    1,389
    That SFL Timmy is gorgeous in pewter! Congratulations.

    The SFL E-mag doesn't look too bad either
    The only difference between martyrdom and suicide is press coverage.

  3. #3
    Join Date
    Nov 2002
    Location
    massillon, ohio
    Posts
    423
    looks at sfl emag and drooools.......that reannoed red would be swweeeeet.................sfl timmy is ok too

  4. #4
    Join Date
    Jun 2002
    Location
    Jersey
    Posts
    2,158
    nice man... the 2 best skock guns made
    RT
    Ace'd Emag (sold)
    Xmag (sold)

  5. #5
    Join Date
    May 2002
    Location
    Indiana
    Posts
    390
    for real bro, that timmy is the best looking gun i have ever seen in my life, period. i HATE timmys and im still admitting that is the best color/color scheme ive ever seen on probably the best milling ive ever seen. the way the pewter and chrome goes together. ohhhhh man is it sexy. it looks amazing. id probably be to scared to play with it if it were mine. congrats on both of them.
    My Trader Feedback

    *AKA factory certified tech
    AIM: TonyG749
    EMAIL: TonyG749@hotmail.com

  6. #6
    Join Date
    Aug 2002
    Location
    Cbus
    Posts
    1,637
    get that java off there, whats your problem!

    Drink Wine

  7. #7
    Originally posted by ntn4502
    get that java off there, whats your problem!
    Hehe as opposed to what? I'm not sanding down the inside of my Halo feedneck

  8. #8
    Join Date
    Aug 2002
    Location
    Cbus
    Posts
    1,637
    but it works sooo great, and it like a no-rise

  9. #9
    Ahhh nothing like two SFL awesomenesses. One thing I dont understand though....heavy Dye Boomstick....on Super Light gun??
    2 da k da 2 Timmah.

    Oh..it shoots da 620:1 .No problemo.

  10. #10
    Join Date
    May 2003
    Location
    B a y A r e a
    Posts
    1,558
    if i was rich i would own all the guns in the SFL series

    My Feedback
    Not Wearing Pants Since 1999
    President of The Anti-Pants Party
    Join The Anti-Pants Party

  11. #11
    Originally posted by wobbles82
    Ahhh nothing like two SFL awesomenesses. One thing I dont understand though....heavy Dye Boomstick....on Super Light gun??
    Well, that's a Shocktech Intimidator...not an SFL Intimidator haha.

  12. #12
    you are my idol

  13. #13
    Join Date
    Oct 2000
    Location
    Saukville Wi
    Posts
    3,124
    Nice backup marker, but I dont think the sfl will ever be down
    Taking a long needed leave of the sport to finish school and tour the country

    b2k3w/pds, vaporized, vapor valve, aka sidewinder, chaos chip, palmer rock lpr, CP barrels, 68/45 hyperflow

    B2k3 w/pds and bunch of upgrades for sale

  14. #14
    Originally posted by LaW
    Nice backup marker, but I dont think the sfl will ever be down
    Hehe who says my new pump gun isn't my primary now?

  15. #15
    Join Date
    Feb 2001
    Location
    Waterford, MI
    Posts
    3,821
    very nice, I can't imagine what the bill on that was though
    looks rather similar to my lasoya'd GZ

    but you shoulda waited a nother month or two and gotten the new front reg assembly from the 2k4
    You are the Wormtongue of AO.~bofh

  16. #16
    NEW!!! Video of my Shocktech Intimidator shooting:



    Right-click and Save As.

    Requires Windows Media Player.
    Last edited by rdb123; 09-24-2016 at 03:30 AM.

  17. #17
    Join Date
    Feb 2003
    Location
    Boston
    Posts
    425
    not too shabby


    Shhh...I have a....cocker...

  18. #18
    Join Date
    Mar 2002
    Location
    Colorado
    Posts
    1,710
    So where are the pics of the Pump Mag up there?

    ntn, you should like that... its basically your mag minus the valve, plus a pump kit
    Hey Zero, how much did that Chipley cost ya?

    Originally said by Boggerman When I got married I thought it would go down too... The insurance, not the wife.

    FRUITCAT!!

  19. #19
    Join Date
    Nov 2003
    Location
    Brookfield CT
    Posts
    979
    I was just wondering if anyone knew about how much the3.2 software w/ shot buffering ran? And just wondering why Shocktech does not make an EMag anymore and why the Jax Warriors stopped using EMags? Because I could not imagine myself playing w/ another gun besides my EMag or my backup RTPro after shooting mags since '95 I absolutely love them!

  20. #20
    Join Date
    Oct 2000
    Location
    Las Vegas, NV
    Posts
    7,105
    It's free if you run into AGD at a tourny or something. Otherwise $20 if you mail to AGD, to handle their costs.

  21. #21
    Join Date
    Oct 2000
    Location
    Saukville Wi
    Posts
    3,124
    Originally posted by AGDFlash
    And just wondering why Shocktech does not make an EMag anymore and why the Jax Warriors stopped using EMags?

    Shocktech only made 30 or so of the sfl and they did not sell very fast at all and they have no intentions of making more. Jax Warriors got a bigger sponsorship with wgp

  22. #22
    Join Date
    Jun 2001
    Location
    Good Ole Amish Country, or just outside of lancaster PA
    Posts
    7,579
    The Jax Warriors Fealt that AGD couldnt carry them as far as dar as they wanted to go, So the warriors struck up a deal with bud orr and they started shooting cockers. (their choice shows in their performance doesnt it... they havnt won any thing for a good while, when they were maggin it, they were doing pretty damn good)

    They origionally had the deal that they would shoot bud's guns, and shoot toms air tanks, but there was a problem, and the warriors never got the flatlines they were supposed to. now they shoot maxflows



    Originally posted by Tom in reffrence to a post saying he acted like my dad...
    "That's right!
    WHO'S YOUR DADDY!!"
    ALL QUIT AND NO GO!!! Team Icky Forest-Shatnerball 2003!!!
    www.tunamart.com
    DONT SUPPORT HYPOCRITICAL MISSLEAD YOUTH, BOYCOTT HK

  23. #23
    Originally posted by TheFlamingKoosh
    So where are the pics of the Pump Mag up there?

    ntn, you should like that... its basically your mag minus the valve, plus a pump kit
    Well, I was hesitant to post up pics of it since I am so close to getting rid of it--some ref at the field offered me a ridiculous amount for it.

  24. #24
    Originally posted by AGDFlash
    ...I could not imagine myself playing w/ another gun besides my EMag or my backup RTPro after shooting mags since '95 I absolutely love them!
    That's what I said before I got my timmy.

  25. #25
    Join Date
    Oct 2000
    Location
    Saukville Wi
    Posts
    3,124
    I think you need to send me the timmy for a weekend. I will overnight it back to you when I am done with it

  26. #26
    Join Date
    Nov 2002
    Location
    Bridgeport, CT
    Posts
    1,583
    Is that the sfl before the tragic accident happend?
    or after?
    [img]Sig image must be under 20k[/img]


    [ Logic Paintball ]


    [ IM ME! ]

  27. #27
    Originally posted by Benfica4ever
    Is that the sfl before the tragic accident happend?
    or after?
    After. I still have yet to get it re-anodized.

  28. #28
    LittlePaintballBoy Guest
    Tragic accident? Mind me asking what happened?

  29. #29
    Originally posted by LittlePaintballBoy
    Tragic accident? Mind me asking what happened?
    Let's just say it was underwater for 24+ hours. I'm sure if you ran a search, you could find the thread.

    Also, 3.2 software is disgustingly fast! I'm kind of sad though that my marker no longer displays "Shocktech X.X" when it starts up, but instead says "AGD 3.2" =(

  30. #30
    Join Date
    Aug 2002
    Location
    Milwaukee, WI
    Posts
    1,247
    *slobber* must have SFL e-mag



    ever wanna sell it?
    Proud Member Of The AO Cesspool Since 08-24-2002

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •