Results 1 to 6 of 6

Thread: RT with Minimag body

  1. #1
    Join Date
    Aug 2003
    Location
    Houston
    Posts
    113

    RT with Minimag body

    I have a RT Pro and i was told that all i had to do to fit the minimag body onto the rt body rail is to mill out a rectangular slot for the mini body. i milled it perfect and everything lines up, however, the stock body screw is too short to screw into the mini body.

    Does the minimag have a longer body screw then the RT Pro or is it that the minimag body rail is thinner so that it can accomidate the minimag body??

  2. #2
    Join Date
    Nov 2001
    Location
    Expendable Goons, Cheap!
    Posts
    3,311
    I'm not sure, I suppose just go with a longer screw.

    I did it oppisite: I milled the minimag body down to fit in my RTP. The body screw fits but barely.

  3. #3
    Join Date
    Aug 2003
    Location
    Houston
    Posts
    113
    where can i find a longer screw like this? i can go to home depot to get a long screw, but i cant find one with a head for a allen wrench.

  4. #4
    Join Date
    Nov 2001
    Location
    Expendable Goons, Cheap!
    Posts
    3,311
    your local proshop?

  5. #5
    Join Date
    Oct 2003
    Location
    Kelowna, B.C.
    Posts
    129
    I found a great selection at RONA Revy... Home depot had a really small selection. Rona is where I got my bolts for my DropForward too.


    Cheers

    ---
    An All AGD team in Central B.C. on its way. -- Tom Kaye, plz help!
    ---