E-mag and lvl 10 bolt reset problems...

[the electrician]

okay I don't have an AGD e-mag, but it's a e-mag of sorts.

anyway, I noticed that when the lvl10 is stopped from moving forward, at about a 1/4" from it's rest position, it resets very slowly. it seems like the sear tries to come back up when the bolt is on it's way back. this puts pressure on the bolt and slows its reset down.

the sear is being held down for 30 msec in my mag. I have heard conflicting reports of how long the sear stays down in an e-mag, bu I imagine it's not too far from the 30 msec I'm using.

has anybody who shoots an E-mag noticed this problem? I've tried a few things, and thought of a few ideas but I would like to hear some other ideas from e-mag owners or techs.

~thanks

[athomas]

I never noticed much lag at all when testing the antichopping capabilities. I did notice it wasn't insantaneous though. I'll have to check it out and actually do a visual timing guess as to how long it takes.

I think you are correct on the 30ms time for the sear to be pulled.