Results 1 to 7 of 7

Thread: Intellifeed to revvy instructions an part numbers please

  1. #1
    Join Date
    May 2001
    Location
    Homewood,Alabama
    Posts
    924

    Intellifeed to revvy instructions an part numbers please

    im sorry im sure this post is out there but i searched for a long time and couldn't find it so if you could help me out i would like the radio shack part numbers, and the instructions on just how t do this.

    p.s. when i searched all ifound was how todo it with the warpfeed this is from an intelliframe thanks

  2. #2
    Join Date
    May 2001
    Location
    Homewood,Alabama
    Posts
    924
    also how much did it cost you

  3. #3
    Join Date
    May 2001
    Location
    USA
    Posts
    719
    Try this link http://www.galaxy-pc.com/mag/wiringdiagram.jpg As for the price, I believe all the parts are less than $10 total.

    "The BEAST"
    "No-Rise" E-mag
    Level 10 Bolt
    AGD Flatline 91cu in/4500psi
    Black HALO B

    "Red Heatseeker"
    Red to Clear Fade Freak Factory Impulse
    68/4500psi Max-Flo
    Red HALO B

  4. #4
    Join Date
    May 2001
    Location
    Homewood,Alabama
    Posts
    924
    im sorry but thats for the warp feed i said i didn't want that i want to know how to do it with a revvy

  5. #5
    Join Date
    May 2001
    Location
    USA
    Posts
    719
    I'm sorry, I was mistaken. I believe this link should definitely help you though...https://www.automags.org/ubb/Forum1/HTML/004698.html Highly recommend that you read the entire thread and add this to what I previously posted.

  6. #6
    Join Date
    May 2001
    Location
    Homewood,Alabama
    Posts
    924
    that didn't really help me

  7. #7
    Join Date
    May 2001
    Location
    USA
    Posts
    719
    The part numbers you need are in this link http://www.galaxy-pc.com/mag/wiringdiagram.jpg Follow the connections in the diagram. In this link, https://www.automags.org/ubb/Forum1/HTML/004698.html , follow Magc68's intstructions on how to perform the mod to the revy which will allow you to still use the eye in the revy as well as agitating the hopper with each trigger pull using the intellifeed that the first link had you create.

Similar Threads

  1. Variations on Intelliframe -> Revvy hookup
    By Gunga in forum Paintball Talk
    Replies: 3
    Last Post: 10-04-2001, 10:31 AM
  2. intellifeed from i frame to revvy instrutions and part numbers
    By PAINTBALLA01 in forum Paintball Talk
    Replies: 1
    Last Post: 10-01-2001, 08:11 PM
  3. intellifeed from i frame to revvy instrutions and part numbers
    By PAINTBALLA01 in forum Automags - Tech Forum
    Replies: 1
    Last Post: 10-01-2001, 07:04 PM
  4. i need the radio shack part numbers to all the intelifeed parts
    By Dubstar112 in forum Automags - Tech Forum
    Replies: 3
    Last Post: 09-01-2001, 11:34 PM
  5. Replies: 3
    Last Post: 09-01-2001, 11:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •