Gotta change your status now.Originally Posted by manwe33
1st one to get a Ripper..... ok wheres the pics ?Originally Posted by manwe33
What ? This is on Facebook too ?Originally Posted by CoolHand
pm'dOriginally Posted by CoolHand
embargo backwards = o grab me
"Guns dont kill people, husbands that come home early do." -Larry The Cable Guy
Dragun Drallion, nexus kit, tickler, e2, pysco 5" drop w/ on off, macroline, A+ bolt and back block, Oydessy 3 barrel kit, armson stealth, 15* ASA, Kapp pump arm, Black Magic, warp feed w/ 12v upgrade, halo b w/ vic&rip, 91/4500 bulldog
Tippmann 98C ebolt, lp kit, m-16 kit, palmer stabilizer
Originally Posted by p8ntbal4me
How goes it captain?
Originally Posted by Papa_Smurf
Im still here,.... the single frame is done that I have,. Alans valve is almost done (needed a new/different pin)
Everyones frame works! I just have to get your parts to work with the frames
Jai "P8ntbal4me" Menard
New lower price $650 everything
Originally Posted by p8ntbal4me
How much will I owe you in the end? I'll toss a few bucks into my paypal account; I haven't used it in a good long while.
Whats happening with the EM Rippers ?Originally Posted by p8ntbal4me
I don't know, I haven't heard from P8nt lately.Originally Posted by going_home
I had hoped that meant he'd gotten through them without trouble.
Guess I was incorrect.
I'll poke him and see what's up.
Im here,.. taking a nice sick day with my daughter.
All the Rippers are done, except Alans Should have it back together again tonight.
Everyone that has a Ripper due to them via me,... please COPY and PASTE in this format to a PM, fill it in,... and send it to me. (omit the parts in parenthesizes once you add in your information)
Full Name: (First and Last)
Shipping Address: (please make SURE this is correct)
Phone Number: (best way to get a hold of you. Guys from countries other than USA MUST provide a phone number)
E-mail Address: (an address to send the shipping and insurance information to)
PayPal Address: (the Paypal address that I will send the invoice to)
Insured Amount: (the amount that you want the entire box to be insured for. I am requiring that you insure the box,... you choose the amount)
You will be billed for $35 + shipping and insurance. I will weigh the box, add insurance, and paypal you a total.
Last edited by p8ntbal4me; 11-08-2010 at 11:50 AM.
That right there is par for the course.Originally Posted by p8ntbal4me
It seems that fate doesn't want Mr Smarse to have his Ripper.
I hope you enjoy it when it finally arrives Alan, 'cause you've defied the entire Cosmos to get it.
Seems there is a problem with the valve.Originally Posted by CoolHand
I prefer Jai get it completely up and running (and set on semi) before its shipped.
Let me know whats happening with the bad valve.
I should have known this was coming when I traded spots with Triangle.
Originally Posted by going_home
We dont even know if the valve is bad,.. it could very well be an item I missed when I walked though the "things to check" lists here on AO.
All 3 valves do the EXACT same thing,.. remove the valve and replace it with anything other than a new one,. and the guns work as Ryan designed them to.
@ Alan: They are all set to Semi,.. and they are fast,.... as in "you wont be dissapointed" fast
My concern is me not being able to make it function correctly.Originally Posted by p8ntbal4me
I wanted it tuned and ready to go because I doubt my ability to do that.
I'm at a loss now.
I think our best bet here is to get BigEvil involved, seeing as he's the "Mag Whisperer" and all.Originally Posted by going_home
Honestly, I am somewhat miffed that a valve brand new from AGD will not function properly.
P8nt informed me that none of the new valves had the right length on/off pin in them, even though they were ordered with EMag length pins.
Who knows what else they didn't get right?
I can tell you one thing though, we are quickly approaching a time when there will be nothing left to go wrong that hasn't already.
So, by that metric, it ought not be too much longer now.
What are they doing (or not doing)? I will try my best to help out.
Home of the Nice, Nice Automag people.
Originally Posted by BigEvil
Sear goes to the rear to push the on/off pin in, and it sits in the rear poss.
Like its stuck there
Got a tracking # for the marker.
Mine is sitting on the kitchen table. Thanks guys.
Hopefully you guys get enough enjoyment out of them to make this whole deal worthwhile for you.
It's a long shot, I know, but at least it's over now (or very nearly so).
Well done P8nt, you're a clutch player for sure.
You mean a saverOriginally Posted by CoolHand
Why is there always a jackass waiting in the wings?
$950 later I get a blind non-working gun.
I have Going Home's here to check out. Not going to get to it until after Xmas though.. If I get it working I will let you know what I did.
Can someone tell me
1 - What the board settings should be
2- what the on/off pin length should be?
On/Off pin should be stock EMag length and should use the EMag X-Ring.Originally Posted by BigEvil
The dwell should end up in the range of 12-18 ms. You can set it to like 25 ms and then reduce it until the marker chuffs or refuses to fire.
The Pred boards used ~15 ms of dwell, but I don't know if the UTB will be the same or not.
Who said anything about sending out non-working guns?Originally Posted by RFLMN1
Lookit, all you gotta do (after BigE finds the proper dwell setting) is program the board and go.
The blindness you are correct about, and I have profusely apologized for being unable to fulfill that part of the deal, but there is nothing I can do about it.
I could have just walked away like many people before me did, but I chose to deliver as much as I was able to.
It's not 100%, but it's a damned sight better than 0%, ya know?
Of course, that doesn't make it any less crappy for you, but sometimes reality "Toad's the Wet Sprocket" (if you catch my meaning).
I started looking at Going Home's gun yesterday. Now if I could just figure out this damn 1-button utb board
Anyway... this thing is really nice. I like it alot.
Originally Posted by BigEvil
I made videos explaining how to program them with my new HD camera,.. but the videos skip on my PC and are half a gig in size.
Im going to make some new ones in a few.
Don't feel bad, it was beyond me as well.Originally Posted by BigEvil
Here is 3 videos I made that will explain how to work the board. Even though I shot these videos using the VER Frame,... the board functions and programming are no different.
Everything you need to know about the board is there. Turning On and Off,.. selecting a fire mode,... and getting into setup menus to change advanced registers.