Logic Ripper EM - The Electro Solution - PreOrder

[CoolHand]

is there a deadline for sending the laser engraving template to you?

Well, there will be one eventually, when they are ready to go off to be engraved, but you've got at least a month before that is ready to happen.

Just try to hurry up every chance you get.

[CoolHand]

OK, these bad boys are going off to ano at the end of next week, so if you haven't gotten me your ano and laser engraving template, you need to get on it.

Anyone wanting to get into this batch, needs to act now. If you wait, there will be a delay.

[RTspag]

you have my ano and laser engrave temp right?! better order now, or your going to be crying

[SpecialBlend2786]

Do we just email you our anno choice and template?

[slimc]

making sure that you got my info, never gat a reply.

[viper_ssc]

Sorry if you already answered a question like this before, but this is a long thread and don't have time to look up the answer.

Would it be possible to get a vertical adapter tapped for a LPR? How much would one cost? I have a new project I'm starting and I'd need a VA tapped for a LPR.

[UTDragun]

The solenoids came in today.

That just leaves ano and boards standing in the way of assembly and shipment to a grateful world.

I'm thinking they will go off to ano next week (unless the new ano guys are horribly slow on the samples).

At any rate, hopefully World Cup goes well for TAG and they have my boards for me when they said they would.

Wouldn't that be wonderful? A project that is actually running on schedule.

I was begining to wonder if such a thing were even possible.

way to go. Im so dissapointed in you. How could you even possibly imagine doing this? Do you not understand what chaos you have unleased? The fury will spread throughout! ...ok I forgot what I was doing... sooo... uhh.... way to jinx it...mmm.. yeah... free up?

[UTDragun]

painkillers are bad

[CoolHand]

Sorry if you already answered a question like this before, but this is a long thread and don't have time to look up the answer.

Would it be possible to get a vertical adapter tapped for a LPR? How much would one cost? I have a new project I'm starting and I'd need a VA tapped for a LPR.

Yes, I can do that. It's not a big deal. Say $15 to work on one you already have, or $25 to buy one of these that is already done (but raw), add $10 of you would like it anodized.

[CoolHand]

Do we just email you our anno choice and template?

Yup.

I will be going through the orders and emailing the folks I do not have everything from yet.

If you don't get an email from me by the weekend, it means I have all your info.

If you don't get an email, and you haven't sent me anything, it means I've lost your order.











. . . . . . . Just kidding.

[CoolHand]

I'm hoping to have these out to ano at the end of this coming week (that would be by 11-4-05).

You've still got time if you want one, but it's running out fast.

[Emag2005]

How long does ano take one or two weeks

[CoolHand]

How long does ano take one or two weeks

Try three or four.

I've worked with seven anodizers now, and every one of them has said two weeks. The closest one came was four. The rest were in the 6-14 range.

Yeah, I hate anodizing with a firey passion. If only raw aluminum would hold up . . . . . . .

[BigEvil]

At any rate, hopefully World Cup goes well for TAG and they have my boards for me when they said they would.

Wouldn't that be wonderful? A project that is actually running on schedule.

I was begining to wonder if such a thing were even possible.

LOL I hope you can pull this off with minimal aggrevation. TAG better get off of their arses with these (and the emag) boards.

I cant wait to actually see these things in action.

FYI I am still interested in one of these frames. I may even decide to pick up an entire gun from you. All will have to wait until after the holidays im afraid. I just got a vet bill for $1500 that kind of put a damper on many of my plans.

[CoolHand]

LOL I hope you can pull this off with minimal aggrevation..........

Me too.

TAG is terrible at hitting their deadlines, so I actually added a month to what they told me when I was setting up my internal deadlines. BUT, it looks like they may even miss that one.

Anyway, I will poke Bob later this week (when I'm sure they are back from WC) about my boards and the EMag boards.

I'll post up whatever I find out.

[CoolHand]

Got the grips today.

I got three colors: Smoke, Red, and Blue.

There are 15 smoke, 5 red, and 5 blue.

I will be sending out the confirmation emails this week, and I will be asking what color grips you want. If you say nothing, you will get smoke. If I run out of red or blue, you will be notified, and then get smoke ( ).

I ended up going with the translucent colors because:

A) They show the LED on the board better.

2) I didn't have to go through DYE to get them.

D) They were on sale.

#) Smoke is a nice neutral color.

~) Black is out of stock everywhere I looked.

So, for those three and a half reasons, we're going with smoke, red, and blue grips.

That is all.

[slimc]

I will take the smoke. Keep up the good work!

[DaveSM]

I would have picked up a black one but I'll go with smoke...

[RTspag]

i wanted smoke anyways. hah

[zackzel]

Tentatively hold a set of the red ones for me depending on how dark the red is.

[UTDragun]

doh, i definately just accidentally bought two guns when I only wanted 1 from the website cuz my browser sucks

[CoolHand]

doh, i definately just accidentally bought two guns when I only wanted 1 from the website cuz my browser sucks

I don't think so.

In fact, I don't even see one order from you. Maybe your browser sucked so bad that you didn't actually get any ordered at all.

I think I said this in reply to your email too, but go ahead and send me your PayPal email address and your real name, so I can look into it.

[RTspag]

frames on the way to anno? find out anything on the boards?

[TFF014]

will the frame work on a dallara or chord body ?

[SpecialBlend2786]

will the frame work on a dallara or chord body ?

yes, but installing eyes and eye covers will be a pain to do

and for the dallara, custom work needs to be done because it works on a standard AM/MM rail.

[luke]

Hey CoolHand, can you get 3 fingers inside the trigger guard and on the trigger?

[CoolHand]

Hey CoolHand, can you get 3 fingers inside the trigger guard and on the trigger?

Yes sir.

Even three polish sausage digits like mine.

[Emag2005]

frames on the way to anno? find out anything on the boards?

?

[CoolHand]

?

No to the ano, but I did hear back about the boards.

Looks like they should be done by the time the frames are done with ano.

It's all coming together now fellas.

Be on the lookout for a confirmation email from me.

When you get it, MAKE SURE YOU REPLY ASAP.

Also, don't post it here, or PM me or whatever, reply to the email. Your info will just get lost otherwise.

[boredcentral]

No to the ano, but I did hear back about the boards.

Looks like they should be done by the time the frames are done with ano.

It's all coming together now fellas.

Be on the lookout for a confirmation email from me.

When you get it, MAKE SURE YOU REPLY ASAP.

Also, don't post it here, or PM me or whatever, reply to the email. Your info will just get lost otherwise.

Are you saying that all the people who have paid you will recieve a confirmation email before you send the frames to the ano? I am asking this question because I have changed my color from the original order form on your website. I did send you a PM and an email but they are lost as you stated above.