Logic Ripper EM - The Electro Solution - PreOrder

[Arstron]

Give me a few more weeks to here some good news but I might be interested.

Thanks but I belive I have found one I am going to buy, if somthing happens and I dont end up with it I will let you know. I cant wait to join the Ripper family.

[Corbet]

This may have been asked before and I know you have your hands full with this project but are there any plans to create a vertical electric fram like the Logic Ripper EM?

I realize your stepping down from development of new products/ideas but you can't! AGD hasnt released anything new in ages!

[CoolHand]

This may have been asked before and I know you have your hands full with this project but are there any plans to create a vertical electric fram like the Logic Ripper EM?

I realize your stepping down from development of new products/ideas but you can't! AGD hasnt released anything new in ages!

Nope, I sure ain't.

I'm gonna lose my *** on these things as it is right now. Sure don't want to start ANOTHER batch of things I'll lose thousands on. I'm no grand business man, but I know better than to make the same mistake twice.

Now, I might do a one off, but it would be so damned expensive, your head would turn inside out when I told you the price.

[Automaggot68]

Nope, I sure ain't.

I'm gonna lose my *** on these things as it is right now. Sure don't want to start ANOTHER batch of things I'll lose thousands on. I'm no grand business man, but I know better than to make the same mistake twice.

Now, I might do a one off, but it would be so damned expensive, your head would turn inside out when I told you the price.

I sent out the part to you today.
You'd have to drill and tap the front of it, but I dont think it'll be too much work.
If Not, WE can mount ti sidesaddle on the On/off
I figure this Phantom ASA will help ALOT.
Also.
Gimme yer proto board.
kthx.

[CoolHand]

I sent out the part to you today.
You'd have to drill and tap thee front of it, but I dont think it'll be too much work.
If Not, WE can mount ti sidesaddle on the On/off
I figure this Phantom ASA will help ALOT.
Also.
Gimme yer proto board.
kthx.

It's not gonna happen weedhopper, it's best to just resign yourself to this fact.

I'll do the best I can, that's all I'm gonna say about that.

BTW, once again, at the end of this day, I feel like I have been mauled by Jesus.

I'm going to bed now.

[Automaggot68]

It's not gonna happen weedhopper, it's best to just resign yourself to this fact.

I'll do the best I can, that's all I'm gonna say about that.

BTW, once again, at the end of this day, I feel like I have been mauled by Jesus.

I'm going to bed now.

[Aeronautica86]

Now, I might do a one off, but it would be so damned expensive, your head would turn inside out when I told you the price.

I didn't know about this thread until now when I just saw it, so I didn't know what was up. I PMed you regarding this a few days ago...so what would be the approximate cost of a single (price of entire new marker plus your electro frame and eyes)?

[going_home]

Did you ever receive any boards for the electro-pnuematic frames/markers ?
If so which one did you go with ?
And what does this choice mean in terms of what it will do versus the predater
you were going to install ?
Less/more choices on modes, faster/slower, etc.

Let me tell you that I appreciate you taking the time to respond
to posts and emails, and giving updates, even if its just every so often.

Especially seeing how the Ga Devil has stopped responding to email
and AO post inquiries about the money and or markers they sent to him.

[Arstron]

I am proud to say that I just sent my money to B&R Automag to buy his spot inline for one of these trigger frames. I am glad to be a part of the few that will have the best electronic trigger frame available for mags.

[Automaggot68]

Did you ever receive any boards for the electro-pnuematic frames/markers ?
If so which one did you go with ?
And what does this choice mean in terms of what it will do versus the predater
you were going to install ?
Less/more choices on modes, faster/slower, etc.

Let me tell you that I appreciate you taking the time to respond
to posts and emails, and giving updates, even if its just every so often.

Especially seeing how the Ga Devil has stopped responding to email
and AO post inquiries about the money and or markers they sent to him.

He's already answered most of these questions, scroll up.

[going_home]

He's already answered most of these questions, scroll up.

He said he contacted Curt sir.
That means nothing to me, I dont know who Curt is or what board he makes.

And even knowing what board it is Ryan got to put in the frames
doesnt tell me how they stack up against the Predater.
What the differences, how many modes, etc.
So thank you, I have been reading this thread, and I wouldnt
have asked the questions, Automaggot68, if my questions had been answered.

So you may be all up on the latest boards and what they do, but some people in here
arent, and need stuff spelled out, thank you very much.

[Automaggot68]

He said he contacted Curt sir.
That means nothing to me, I dont know who Curt is or what board he makes.

And even knowing what board it is Ryan got to put in the frames
doesnt tell me how they stack up against the Predater.
What the differences, how many modes, etc.
So thank you, I have been reading this thread, and I wouldnt
have asked the questions, Automaggot68, if my questions had been answered.

So you may be all up on the latest boards and what they do, but some people in here
arent, and need stuff spelled out, thank you very much.

Don't Sass Me, girly.
if you had been paying attention, you'd have known this.
I got ALL of this on page.....DUN DUN DUN.....21.
Learn to read.

Huzzah!!!!

Progress!

Called Curt and got the skinny.

Not only did I get my boards ordered (15 now, and the rest in about five or six weeks), but I found out that the EMag boards are going to fabrication on Thursday of this week.

That means that I can start on eye installs and what not, and that the EMag boards should be shipping in about a month.

Woo frickin' Hoo!!!

Then.

Quick update (if you can call it that).

I've contacted Curt and paid for the boards, but I have not seen any sign of them yet, nor have I heard from Curt since I called.

I have dispatched an email to Curt to see what is up.

I also have not yet sent the Sterling off to Absolute yet, as I just haven't gotten to it.

My big project at work is really spooling up, and I've been literally slammed. I spend at least three days a week on the road now, which doesn't leave a lot of time for paintball.

But, not to despair, I haven't forgotten about you all, it's just taking a long time.

Still waiting on Curt. Surprise Surprise.

As much as I hate to say it, if WAS gets their micro EQ's out before these boards show up, I'm gonna bail on TAG and Curt both.

Bob and Curt are both great guys, but getting product from them is a crapshoot at best.

At least the weather is nice . . . . . . . .

I have not heard from Curt nor gotten any boards in a month. Big surprise.

I'm tracking down other possibilities such as the new WAS boards, but dealing with them is like dangling your wedding tackle in a bear trap.

I've also got the EIT this weekend, so I'm studying hard core.

Basically, the week is only half over, and I already feel like I've been mauled by Jesus.

Other than that, nothing.

[going_home]

Don't Sass Me, girly.
if you had been paying attention, you'd have known this.
I got ALL of this on page.....DUN DUN DUN.....21.
Learn to read.


Then.

Ok then, after all that why dont you tell me which board is going to be in my marker then sir ?

[Automaggot68]

Ok then, after all that why dont you tell me which board is going to be in my marker then sir ?

The Predator II if Ryan recieves them from Bob/Curt.
If not, He's looking into the W.A.S. MicroEQ's.
Anything else?

[SpecialBlend2786]

The Predator II if Ryan recieves them from Bob/Curt.
If not, He's looking into the W.A.S. MicroEQ's.
Anything else?

[Automaggot68]

Booyah.

[CoolHand]

He's already answered most of these questions, scroll up.

Yeah, pretty much.

JD refuses to sell wholesale to me, because I have the ability to use the intrawebs, so I could sell them online and undercut his MSRP. Jackass. So, if I do EQ's they're gonna have to be bought at retail prices . . . . . . hundreds more down the drains.

No word from Curt at all, I have no idea what's going on there.

That is all.

Derek - Be nice.

Everyone Else - Be nice too.

[Automaggot68]

Derek - Be nice.

Everyone Else - Be nice too.

/growl

[going_home]

The Predator II if Ryan recieves them from Bob/Curt.
If not, He's looking into the W.A.S. MicroEQ's.
Anything else?

Well thanks for an answer.
All these Bobs, Curts, abreviations, W.A.S, EQ's have my head spinning.
Ok so I have no idea who these people are or what the abreviations mean.

[CoolHand]

Well thanks for an answer.
All these Bobs, Curts, abreviations, W.A.S, EQ's have my head spinning.
Ok so I have no idea who these people are or what the abreviations mean.

Sorry man, I've know these people for a while now, so I sometimes forget that not everyone knows who works where.

Bob = Bob Sandifer owner of TAG Sportz (formerly The Angel Guy)

Curt = Curt Hartung owner of KM2 (Kenshaw Mountain Markers), the genius behind the Pred and Morlock boards

Jim / JD = Jim Drew former owner of (though I am pretty sure he is still in charge, just sold out to an LLC to insulate himself from liabilty suits when they started shipping ramping code) WAS (Wicked Air Sportz), creator of the Equalizer (EQ) boards that made the Timmys so popular.

That should about do it.

[Corbet]

Hey CoolHand -

I remember when you first started you did milling of classic rails for a small fee (to make them lighter and look like your own logic milled rails)

I was just wondering if you'd be willing to do it again? I ended up selling off my milled rail (damn it!) when I thought I was getting out of paintball.

[CoolHand]

Nope, sorry.

Working on used customer parts was a PITA.

[Automaggot68]

Nope, sorry.

Working on used customer parts was a PITA.

The part went out today, expect it soon, shipped prioity.
Shipped to the 801 Address.

[UTDragun]

any news?

[CoolHand]

any news?

Things still to do:

Three or four eye installs and rail milling.
Have the boards actually show up.
Send off for ano and have it come back.
Install guts.
Wish I had profited.

Basically, I email Curt every few days to a week, asking where my boards are. He responds with a confused "I was told they had been shipped already!?!" and then says he will figure it out. Another week passes, and I get no boards. Rinse, repeat, look for other boards, find none.

I'll go dispatch my third email of this week to him, and see what happens.

You know, performing the exact same action over and over, while each time expecting a different outcome is the definition of insanity. That must make me a --->

[going_home]

I for one appreciate you taking the time to update us.
Thanks

[BigEvil]

You know, performing the exact same action over and over, while each time expecting a different outcome is the definition of insanity. That must make me a --->

LOL kinda of sounds like the EXACT routine I have with Curt.

"Has is shipped yet"?
"sorry, no tomorrow"

"Has is shipped yet"?
"sorry, no tomorrow"

"Has is shipped yet"?
"sorry, no tomorrow"

"Has is shipped yet"?
"sorry, no tomorrow"

"Has is shipped yet"?
"sorry, no tomorrow"

"Has is shipped yet"?
"sorry, no tomorrow"

"Has is shipped yet"?
"sorry, no tomorrow"

"Has is shipped yet"?
"sorry, no tomorrow"

[Stealthed_Banana]

Things still to do:

Three or four eye installs and rail milling.
Have the boards actually show up.
Send off for ano and have it come back.
Install guts.
Wish I had profited.

Basically, I email Curt every few days to a week, asking where my boards are. He responds with a confused "I was told they had been shipped already!?!" and then says he will figure it out. Another week passes, and I get no boards. Rinse, repeat, look for other boards, find none.

I'll go dispatch my third email of this week to him, and see what happens.

You know, performing the exact same action over and over, while each time expecting a different outcome is the definition of insanity. That must make me a --->

What about the blue-pewter faded Dallara?
Do any work on that one yet?

[CoolHand]

Tell me about it. No reply to the last email yet.

If I could find an alternative, I surely would take it, as they have long since pissed me off.

But, try as I might, I cannot find a board that will do what I want it to do, and still fit in the space I need it to.

The whole deal just makes me angry.

When I screw something up, I own up to it, and take my *** eating. Bob and Curt have stepped on their wee wee's in one way or another here, that much is obvious. But still they say nothing, and continue on as if all is well. Full steam ahead!

Meanwhile, the ship is on fire and slowly sinking, while everyone who can swim jumps over the aft rail.

Pretty soon, it's just gonna be me, Bob, and Curt, on a smoking half waterlogged ship.

I hate that this is taking so long, I really do, but I have basically exhausted all of my options at this point. We have to wait it out.

That said, if WAS comes out with the MicroEQ before Curt gets my boards to me, I am totally bailing. Even if it is JD, and I have to pay retail for them, I'm so pissed now that I'd just about do it for spite.

That's about it, if I had a on call, I'd be sending his sneaky *** to GA, that is for sure and for certain.

[CoolHand]

What about the blue-pewter faded Dallara?
Do any work on that one yet?

Nope, I haven't touched any of the eye installs yet, and I'm not going to until I know what boards I am getting.

Otherwise, if I have to change boards, something could be different about the eyes, or the on/off switch, or anything, and previously done machine work could totally screw us.

Nope, there aren't that many to do, so I am not even starting until the parts going in are finalized.

To do otherwise is to invite disaster upon an already snake bit project.