Logic Ripper EM - The Electro Solution - PreOrder

[going_home]

pfft, for people who bought other people's spots in line just recently, no cutting, back of the line you tools lol

Fair is fair, you come to the game late, you get the leftover seats.
I agree. If you bought someone elses spot, you should go to the back of the line.
But its not our opinions that count, its the guy thats building them.
He will do it in the order he thinks is right.

But I think it would be nice to know what the spot names and numbers are.

[Arstron]

Fair is fair, you come to the game late, you get the leftover seats.
I agree. If you bought someone elses spot, you should go to the back of the line.
But its not our opinions that count, its the guy thats building them.
He will do it in the order he thinks is right.

But I think it would be nice to know what the spot names and numbers are.

True, its all up to coolhand, but here is my oppinion. If you buy somones spot in line, then that should be your spot. Some people might pay extra to get one of the early spots.

Just my 2 cents.

[zackzel]

True, its all up to coolhand, but here is my oppinion. If you buy somones spot in line, then that should be your spot. Some people might pay extra to get one of the early spots.

Just my 2 cents.

This is my opinion as well, because I bought someone else's spot early enough that I could have just bought a spot in line, hell when I bought that spot I think there were under like 10 frames sold for sure. I bought that spot because I would get my product earlier. So I wasn't buying the product per say I was buying that actual spot in line.

[RTspag]

you wanna walk the plank! arrrrrg. wow it's too early for me, crap, i have to go hop in the company truck and makes sales calls....

[CoolHand]

Sorry for the late reply guys, i got bant for speaking my mind. lol Gotta stop doing that.

Anyway, I'm gonna roll through the orders via the date on the original invoice, regardless of who owns said spot now.

I will post up the names of the nine guys I have boards for, if that is OK with everyone.

You remaining few, do not despair. I have a line on some other boards, totally different, but maybe a little more full featured. Talking to Goldie about his '06 Chaos boards. Keep your fingers crossed, if they will work, you guys will have Vlinks to tinker around on them with, as well as the ramping modes and such.

If your name appears on the mini-morlock list, and you would rather wait for the Chaos boards (assuming they will work, and they aren't six months off), just say so, and I will bump up the next guy in line.

Also, if you get a mini-morlock, and have to have the ramping modes, TAG will flash your board for $25 IIRC, but I'm not sending them down there. They have been utterly unreliable in the past, and I don't want my stuff held hostage for months over a simple ROM flash.

Ok, that should bring us to the present. I need to shake out all the parts, and get these things organized so I can start the machine work for the ones that need it.

I will also be confirming colors and engraving as I go along. When I post here for you to look, be on the lookout for an email from me, but not before. I don't want 40 posts and emails from people asking if I'm ready for their info yet. When I need it, i will let you know.

That is all. Thanks for holding on patiently guys, I really appreciate it.

[zackzel]

No problem Ryan, I can be patient as long as I'm updated. Thank you for taking the time to update us. And now that things are starting to move along I think all will definatly be well.

[DaveSM]

I think posting name is fair to everyone.

Thanks for this Update Ryan. I'll be watching this thread to see when my name comes up.

[going_home]

You remaining few, do not despair. I have a line on some other boards, totally different, but maybe a little more full featured. Talking to Goldie about his '06 Chaos boards. Keep your fingers crossed, if they will work, you guys will have Vlinks to tinker around on them with, as well as the ramping modes and such.

Also, if you get a mini-morlock, and have to have the ramping modes, TAG will flash your board for $25 IIRC, but I'm not sending them down there. They have been utterly unreliable in the past, and I don't want my stuff held hostage for months over a simple ROM flash.

The boys at goapeonline.com can get you some mini boards produced
pretty quick.
I saw the A5 with their board in it at Tampa NPPL and it was pretty sick.
It was as fast ramping as my 06 Ego, but the A5 does weigh a ton though.
AO'er diveanx is the guy to talk to.

[CoolHand]

The boys at goapeonline.com can get you some mini boards produced
pretty quick.
I saw the A5 with their board in it at Tampa NPPL and it was pretty sick.
It was as fast ramping as my 06 Ego, but the A5 does weigh a ton though.
AO'er diveanx is the guy to talk to.

Talked with them too, but Goldie has a product in the pipeline already, which is robust and not custom made for me (all of which means it should be cheaper than a just-for-me product). This also means he should be able to deliver in relatively short order.

I just looked over the VLink software, and it is very nice. I'm very impressed so far, hopefully his delivery will hold.

Hang in there guys, we're rolling now.

[zackzel]

Hang in there guys, we're rolling now.

Thats what I like to hear

[RTspag]

great, just what i needed, my uncontrollable drool and neck twitch are back... they come hand in hand with hope and optimism.

[RFLMN1]

Can you tell me which spot in line I bought from Emag2005? Thanks
Jason

[RTspag]

*bump* so are the spots/order getting posted or anything.

[CoolHand]

Alrighty here we go:

1 - Derek Rhodes - Custom Install
2 - Greg Wong - Bolt-On
3 - Randall Briggs - Bolt-On
4 - Colin Hanel - Bolt-On
5 - Richard Anderson - Bolt-On
6 - Brian Strauch - Bolt-On
7 - Matt Hirota - Bolt-On
8 - David Brassard - Custom Install
9 - Martin Rudzki - Complete Custom Marker

Well, that's the list anyway.

[DaveSM]

Hurray

I'm on the list

Before you send my marker to anodization let me know because I once again changed my mind but for the last time

[CoolHand]

Hurray

I'm on the list

Before you send my marker to anodization let me know because I once again changed my mind but for the last time

I'll hit you with an email to verify all that stuff when I get yours ready for ano.

That goes for everyone.

When it's time for ano I will email you to confirm your choices.

[going_home]

Alrighty here we go:

1 - Derek Rhodes - Custom Install
2 - Greg Wong - Bolt-On
3 - Randall Briggs - Bolt-On
4 - Colin Hanel - Bolt-On
5 - Richard Anderson - Bolt-On
6 - Brian Strauch - Bolt-On
7 - Matt Hirota - Bolt-On
8 - David Brassard - Custom Install
9 - Martin Rudzki - Complete Custom Marker

Well, that's the list anyway.

I think I speak for all the people that bought into your project,
even though some may not be in the first batch (including me ),
it is much appreciated the way you are keeping us updated.
Thanks

[zackzel]

Alrighty here we go:

1 - Derek Rhodes - Custom Install
2 - Greg Wong - Bolt-On
3 - Randall Briggs - Bolt-On
4 - Colin Hanel - Bolt-On
5 - Richard Anderson - Bolt-On <- Thats the spot I bought
6 - Brian Strauch - Bolt-On
7 - Matt Hirota - Bolt-On
8 - David Brassard - Custom Install
9 - Martin Rudzki - Complete Custom Marker

Well, that's the list anyway.

Ryan mine wasn't just a bolt on though, I sent you my Karta body, valve and all the other stuff. You still have that stuff floating around right?

[CoolHand]

Ryan mine wasn't just a bolt on though, I sent you my Karta body, valve and all the other stuff. You still have that stuff floating around right?

Guys, you gotta use your real names with me, I have no idea which handle goes with which name.

Please don't be insulted, I've just got like a thousand names kicking around all the time.

Just forward a copy of your PayPal invoice to me so I can update my records.

Sorry for the mixups, there is a crapload of paperwork on these things, and many of you changed your minds about five times, so it's all jumbled up.

That's why I'm gonna confirm what needs to be done on each one when it's number comes up.

That way there aren't any crap ups.

I think I speak for all the people that bought into your project,
even though some may not be in the first batch (including me ),
it is much appreciated the way you are keeping us updated.
Thanks

Not a problem. You all have a lot of money out. I am doing my best to see that you get what you paid for. I timely manner is basically out of the picture at this point, but the rest I can take care of.

Hang in there all, we'll get it eventually.

[zackzel]

Guys, you gotta use your real names with me, I have no idea which handle goes with which name.

My real name is Zack Zelehoski, I bought Richard Andersons Spot in line so I don't have a paypal reciept for you I can email you the reciept for paying him if you want.

[CoolHand]

My real name is Zack Zelehoski, I bought Richard Andersons Spot in line so I don't have a paypal reciept for you I can email you the reciept for paying him if you want.

If you sent it in, it's still here in the original packaging, waiting for your turn in line.

I will fix the list to reflect the corrected info.

1 - Derek Rhodes - Custom Install
2 - Greg Wong - Complete Custom Marker
3 - Randall Briggs - Bolt-On
4 - Colin Hanel - Bolt-On
5 - Zack Zelehoski - Custom Install
6 - Brian Strauch - Bolt-On
7 - Matt Hirota - Bolt-On
8 - David Brassard - Custom Install
9 - Martin Rudzki - Complete Custom Marker

[Carbon Blue]

Hey there CoolHand! totally off topic question but I dont know if you check your PMs so i posted here, I purchased an Ultimate Mech Mag frame from you a while back and was wondering if these trigger pins would work with your frame?

http://www.buyluckypaintball.com/servlet/Detail?no=12

if they do work which length would need to be purchased? short? medium or long? thanks again

[RFLMN1]

I bought EMag2005s spot, I cant get ahold of him, do you remember his name by any chance? Thanks

Jason

[CoolHand]

I bought EMag2005s spot, I cant get ahold of him, do you remember his name by any chance? Thanks

Jason

If you give me your full name (via PM if you don't want to post it), I can cross reference my files and see if i can dig up his contact info for you.

He didn't stiff you or anything, did he?

[RFLMN1]

Jason Davis, He didnt stiff me, I sent you the money and you forwarded it to him. Thanks

[Phurious]

Any updates?

[UTDragun]

Any updates?

what he said.

[CoolHand]

what he said.

I am currently workin on #1.

I will post pics when I get the machine work done.

Sit tight folks, things are happening, just slowly.

[UTDragun]

I am currently workin on #1.

I will post pics when I get the machine work done.

Sit tight folks, things are happening, just slowly.

you and your stupid "Real" job

what i meant to ask was
any updates on the chaos board situation?

[CoolHand]

you and your stupid "Real" job

what i meant to ask was
any updates on the chaos board situation?

Yes, in fact.

Goldie sent over one of the prototype boards, and it looks very good. I think we've got a winner here folks.

Now I'm back to square one to start collecting up the parts to install them again.