Results 1 to 22 of 22

Thread: Custom mag bodies?

  1. #1
    Join Date
    Oct 2001
    Location
    Deep in the recesses of Northern Virginia
    Posts
    1,346

    Custom mag bodies?

    I know there are a few out there, but I can't keep them straight

    My classic mag is well . . . old. And considering I'm thinking of turning it into a pneumag, I thought I might get a new body as well. But like I said, I can't keep them straight.

    Could some of ya'll list them? (and include pics please? )
    BrockSampson "I see dead people..."



    and once I see them, I make sweet, sweet love...

  2. #2
    Join Date
    Aug 2004
    Location
    West Michigan
    Posts
    643
    Well, I don't have pics of them, but here goes:

    ULE mainbody by AGD (and Pariah and Exile bodies by Rogue, which are essentially milled down ULE's). ULE on my former pneumag below:


    Pariah by RPG


    Exile by RPG


    IT body by Xtreme Depot


    Micromag body by PTP, several different versions made (this is a body/rail combined).


    Karta by Deadlywind


    Dallara by Deadlywind


    Minimag (basically a 68 Classic body with an extended front "shroud").

    Chord V1

    Chord V2


    The old SS RT Pro bodys

    And then of course, the SFL Emag, the Xmag, and so on.

    Xmag


    SFL (heavily milled)
    Last edited by shorty24; 05-07-2007 at 04:22 PM.

  3. #3
    Join Date
    Mar 2005
    Location
    LOL! Say what? Wait do yo
    Posts
    2,206
    IT body was Xtreme Depot
    Chord V1 Chord V2 Deadlywind
    sluggo body and create your own masterpiece.

  4. #4
    Join Date
    Mar 2003
    Location
    St. Louis
    Posts
    4,999
    Quote Originally Posted by shorty24
    Karta by Deadlywind
    by far the best of them all

    oh, and all are discontinued so unels your getting a ule expect to pay $300~ or more

    and who on AO knows me as kdog?

  5. #5
    Join Date
    Apr 2005
    Location
    a toda madre o un desmadr
    Posts
    5,078

    Talking meh

    i do..kdogg, karta keeper, ..chronobreak..pbn mod...man of many names..

  6. #6
    Join Date
    Aug 2004
    Location
    West Michigan
    Posts
    643
    can't fit any more pics in my first post, so I'll have to continue later...

  7. #7
    Join Date
    Oct 2001
    Location
    Deep in the recesses of Northern Virginia
    Posts
    1,346
    Not to up an old thread, but will all of those bodies work on an Emag rail? Or would I have to get a new one?

  8. #8
    Join Date
    Aug 2004
    Location
    West Michigan
    Posts
    643
    Pretty much all of them should. The micromag, SFL, and Xmag bodies you'd only need your lowers of course, but other than that they should. And depending, some of the old SS bodies from factory mags may not fit if your rail.

  9. #9
    Join Date
    Feb 2006
    Location
    www.thepbforum.com
    Posts
    1,262
    Quote Originally Posted by A-Tach-One
    IT body was Xtreme Depot
    Chord V1 Chord V2 Deadlywind
    sluggo body and create your own masterpiece.
    Where can I get that IT body? it looks sexy

  10. #10
    Join Date
    Aug 2004
    Location
    West Michigan
    Posts
    643
    You're gonna have to find one used somewhere as they're out of production. Every once in a great while one will turn up on b/s/t or ebay.

  11. #11
    Join Date
    Feb 2006
    Location
    www.thepbforum.com
    Posts
    1,262
    Quote Originally Posted by shorty24
    You're gonna have to find one used somewhere as they're out of production. Every once in a great while one will turn up on b/s/t or ebay.
    DAMNIT

    Why did AGD disscontinue the SLUG body? I really wanted a karta...

  12. #12
    Join Date
    Oct 2001
    Location
    Deep in the recesses of Northern Virginia
    Posts
    1,346
    Quote Originally Posted by cyrus-the-virus
    DAMNIT

    Why did AGD disscontinue the SLUG body? I really wanted a karta...
    because everyone said they were too expensive. Ironic, isn't it?

  13. #13
    Join Date
    Feb 2006
    Location
    www.thepbforum.com
    Posts
    1,262
    Quote Originally Posted by slateman
    because everyone said they were too expensive. Ironic, isn't it?
    wow.....just wow

    Even I am amazed at the depth of stupidity people have...

  14. #14
    Join Date
    Feb 2002
    Location
    'Merica
    Posts
    2,490
    IIRC most Extreme Depot bodies were not made from AGD slugs... and the tolerances showed... beware of them...

  15. #15
    Join Date
    Oct 2001
    Location
    Deep in the recesses of Northern Virginia
    Posts
    1,346
    Quote Originally Posted by cyrus-the-virus
    wow.....just wow

    Even I am amazed at the depth of stupidity people have...
    What? Isn't that what happened? No one bought them because they thought they were too expensive because you had to buy the body then have it milled.

  16. #16
    Join Date
    Aug 2004
    Location
    West Michigan
    Posts
    643
    Quote Originally Posted by Fred
    IIRC most Extreme Depot bodies were not made from AGD slugs... and the tolerances showed... beware of them...
    Although I've never actually owned one, I heard the same thing. There was a post up ages ago about that...

    /I'd prefer a Dallara or Karta, anyway...

  17. #17
    Join Date
    Feb 2006
    Location
    www.thepbforum.com
    Posts
    1,262
    Quote Originally Posted by slateman
    What? Isn't that what happened? No one bought them because they thought they were too expensive because you had to buy the body then have it milled.
    That wasent directed at you it was directed at the people who said slugs were to expensive then (when they were like 150$)

    Now people are shelling out 200-300$ for them...

  18. #18
    Join Date
    May 2005
    Location
    Florida
    Posts
    1,254
    Quote Originally Posted by slateman
    What? Isn't that what happened? No one bought them because they thought they were too expensive because you had to buy the body then have it milled.

    AGD quit producing the slug bodies. They were being bought, I am sure Deadly Wind was buying a good number.
    Last edited by 11 Bravo; 09-19-2006 at 02:41 PM.

  19. #19
    Join Date
    Feb 2006
    Location
    www.thepbforum.com
    Posts
    1,262
    Quote Originally Posted by 11 Bravo
    AGD quit producing the slug bodies.
    no **** shurlock.....

  20. #20
    Triangle Guest
    That blue and pewter one is gorgeous.

  21. #21
    Join Date
    May 2005
    Location
    Florida
    Posts
    1,254
    Quote Originally Posted by cyrus-the-virus
    no **** shurlock.....
    You must be a PBN refugee.

    If you would read the entire thread you would see that he is inquiring as to why there are no more aftermarket bodies. I stated the fact as it is. No AGD slugs no aftermarket bodies.

  22. #22
    Join Date
    Aug 2002
    Location
    FURF!!!!!!!!!!!!!!!!!!!!!
    Posts
    2,828

    sluggo

    hmmm Nicad if you are looking... what would it cost to get a sluggo turned into a karta body if I could happen to get my hands on them?


    Anyone else try and machine sluggos or bodies from scratch ever?


    Styg
    Sometimes It's Good to be EVIL

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •