they are not sentences lol
AO-CT
they are not sentences lol
a period would be nice.
anyway, I used a double acting cylinder, with a 5mm bore with and a 5mm stroke length. The provlem is that i ordered a bunch of different clyinders along time ago, [for experimentation] but shaved off the company name on the particular cylinder. The other downside is i lost all my favorites when i reformatted my computer. I will find it though. I haven't had the time lately....
Latches109
No more UTBs!
What about that noid your using?Originally Posted by latches109
I know which one it is,.. but has it started leaking yet?
My biggest issue, as well as BigEvil's, was the noid was a leak problem from the get go.
Its a great unit and all,.. just that after messing with it to test the limits of the gun it just broke.
I have my gun cycling way beyond 20BPS (someone contacted me to make a video for proof. Hopefully the weekend of the 17th you will see it posed here) and I think that to go beyond 20BPS the noid needs to be at a higher input PSI,.. at least the max input psi does.
Food for thought,... input on this wold be great!
_______________________
Jai "P8ntbal4me" Menard
noid is rated for .7 bar It will leak above this pressure. I haven't had any problems yet.
No more UTBs!
Not that I want your gun to break or anything.
But if you test it out a bit more, try maxing out the ROF.
I dont use EGOs so I dont know what the software can do.
If you go above that ROF for say, 1000 shots, check for leaks in the noid.
Registered User
SO I was thinking, why not put the noid and possibly even the board in an emag battery case?? Then you could possibly use an actual ego solenoid and/or better etc. Also then you could use any frame u want and then would it be possible to use the Regular pneumatic ram commonly used in pneumags?? It would be sweet if someone could mill the emag battery case for the button holes & lcd window like the frame too!!
No more UTBs!
I was just lookng at your ram you used.
Looks ALMOST like mine. Mine is a bit longer and slightly deeper but drops into the I-frame with no milling required. Whats the width of that EGO frame internally?
My bore is larger too,... Im using an 8mm bore. I was going to try the 6mm & 4mm bore but between gas usage and the stoke to strike force on the sear using an R/T on-off.... 8mm as the way to go.
No more UTBs!
Dont quote me on this or anything, but I do believe this is already in the works.
why over engineer things?
noid won't leak unless the lpr creeps up. The lpr is able to keep up at 15.4 bps[ego's cap] A few cases have been through this noid, with no leaks.
Posting Permissions
Reply With Quote