Results 1 to 7 of 7

Thread: Xmag Tac one??

  1. #1
    Join Date
    Dec 2006
    Location
    Calgary, Alberta
    Posts
    928

    Xmag Tac one??

    Will an xmag body fit on a tac one without any mods? and where can i get one? i want the option for warp or vert feed


  2. #2
    Join Date
    Dec 2005
    Location
    Aaaaa Oh You Know
    Posts
    2,280
    You can put a intelli on a xmag (body/rail are one). Xmag bodies are kind of rare to find parted. Complete xmags go for 700-1200 bodies are about 400-450. You might be better off buying a warp tac body from AGD and switching when you want to go warp. A qloader maybe a good option instead of a warp drive.

  3. #3
    Join Date
    Jan 2006
    Location
    Saskatoon, Canada
    Posts
    830
    Quote Originally Posted by jade_monkey07
    Will an xmag body fit on a tac one without any mods? and where can i get one? i want the option for warp or vert feed

    Yes....but to be an x mag all you need is the unique body (and A.C.E.)....all that is needed to be a tack one is the unique body. The grip frames are generic to any agd gun (except the orriginal RT), both have an x valve.

    If you want an x mag body with your tac one's trigger frame (basically all you would be doing anyway) is to attached the frame directly to the x mag body and throw away the rail from your tac one (the x mag body doesn't need a rail).
    Also keep the x valve from your tac one since it has a different on/off pin than your x mag. The on offs are different for electro and mechanical. Basically keep your x valves paired with the grip frames they are with now.

    You can get a x mag for $800-1000 off of ebay. You may aw well buy a tack one warp body. Also you would have to buy an x mag with a vertical breach since you can't get them anymore. You can buy the warp breaches for $75 from Tunamart.
    Last edited by Tao; 04-06-2007 at 05:05 PM.

  4. #4
    Join Date
    Dec 2006
    Location
    Calgary, Alberta
    Posts
    928
    Wow thats expensive for a body, i thinhk ill just get the warp tac for 220

  5. #5
    Join Date
    Mar 2005
    Location
    LOL! Say what? Wait do yo
    Posts
    2,206
    Quote Originally Posted by jade_monkey07
    Wow thats expensive for a body, i thinhk ill just get the warp tac for 220
    I believe he meant 800 - 1000 for an entire XMag. The bodies I have seen go for over 400.

  6. #6
    Join Date
    May 2006
    Location
    The Netherlands
    Posts
    820
    Or just make a xmag into a TAC-Xmag





    I added a lapco barrel shroud to the barrel, and placed a specops A5 flattop rail on top of the mag (had to file out the rail to fit tho) and a red dot scope. Only downside is that i cannot use the scope when running vertical feed.

  7. #7
    Join Date
    Jan 2006
    Location
    Saskatoon, Canada
    Posts
    830
    Quote Originally Posted by A-Tach-One
    I believe he meant 800 - 1000 for an entire XMag. The bodies I have seen go for over 400.
    Yeah I mean't an entire x mag since I didn't think you could get just a body (asside from 1 or two occassions it has been done that I heard of).

    Still if you want the option you have to find one with the centre feed breach since you can't get those anymore, and I bett you won't be able to get the warp breaches in the near future either...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •