Page 1 of 2 12 LastLast
Results 1 to 30 of 528

Thread: 1000mah E-mag X-mag Battery Packs.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Aug 2004
    Location
    1000mah Emag Batteries PM me.
    Posts
    1,812

    NEW 1000mah E-mag X-mag Battery Packs.

    In Stock 03-25-2010

    Aftermarket software has kept the AGD E-Mag platform a top competitor despite its age. One component that's showing its age however, is the stock 650mah battery pack. The AGD 650mah pack is both expensive and underpowered compared to recent advances in battery storage capacity. When I found myself in need of 5+ battery packs for my friends and myself, I looked to custom aftermarket solutions. Now, tried and tested in my own X-Mag, this is what I had built:

    <a href="http://i53.photobucket.com/albums/g80/DarkBlueBlaZeR2/Emag%20Battery%20Pack%20Pics/P1000946.jpg"><img src="http://i53.photobucket.com/albums/g80/DarkBlueBlaZeR2/Emag%20Battery%20Pack%20Pics/P1000946.jpg" width="600" height="450"></img></a>

    Version 3 packs now come with the Fuse installed.

    -1000mah High Discharge Tenergy Cells provide an estimated 30,000+ shots on a single charge.
    -Professional Welded construction, NOT soldered (soldering heat damages battery pack cells.)
    -Silicone wrapped wire (low resistance & high temperature melting point.)
    -Shrink wrapped to fit the tight confines of the E-mag battery housing.
    -Reinforced construction that fits perfectly (no o-ring needed)
    -Works in X-Mags, E-Mags, Micro-Emags and SFLs.
    -Works with both the stock AGD charger as well as aftermarket chargers.




    Testimonials:
    Quote Originally Posted by FiXeL
    I'm really impressed with the quality of these cells
    Quote Originally Posted by RA1N1ER
    these are awesome ... you have to really get one
    Quote Originally Posted by PsychoBaller
    Definately a better pack then the stock AGD pack.
    Quote Originally Posted by Russ
    Got my pack - It is very professional-looking.
    Quote Originally Posted by mt84
    got the battery pack today, WoW you shure did some fine work there. Great product.
    Quote Originally Posted by mpsd
    The battery pack is super well done
    Quote Originally Posted by Ratzo
    Pack looks great very well put together.

    Please note: Prices on nicad and nimh cells have gone up with the rising costs of tin, copper and shipping from China. The cells my packs are made from went up over 30% from last year.

    Pricing and ordering Information
    -Replacement packs without tops $59.99 shipped
    -Complete packs with AGD Tops and clips installed $69.99 shipped. Paypal/MO/Check



    Please note
    : Replacement packs come as pictured, without tops. They are designed as a replacement for failed AGD packs, and thus the stock tops and clips must be re-used.

    Also note: if you are not comfortable soldering the tops on yourself, you can send your top to me for free installation.

    warning The wires must be connected to the correct clips or damage to your charger and board will result. If you are worried about installing the top yourself please take advantage of the free install or opt to purchase a complete pack.


    <a href="https://www.automags.org/forums/showthread.php?t=204977&highlight=KCs-RTule">Feedback
    Last edited by KC; 03-25-2010 at 05:49 PM.

  2. #2
    Join Date
    Dec 2000
    Location
    offshore
    Posts
    8,511
    Do they have the fuse installed?
    Email me for low prices on ALL AGD Products and more. tunaman5@verizon.net
    Tunamart

  3. #3
    Join Date
    Aug 2004
    Location
    1000mah Emag Batteries PM me.
    Posts
    1,812
    Quote Originally Posted by Tunaman
    Do they have the fuse installed?
    No fuse. If someone feels they need one, I can install one for $5.00

    -Kristian

    EDIT: 5-4-8 Version 3 packs come with fuses. -KC
    Last edited by KCs-RTule; 05-04-2008 at 03:32 AM.

  4. #4
    Join Date
    Feb 2006
    Location
    www.thepbforum.com
    Posts
    1,259
    wow....it's even cheaper than a real battery

  5. #5
    Join Date
    Sep 2006
    Location
    Eyes for your EMAG? Oh yes! PM me for an ACE board. Replacement Xmag ACE boards too!
    Posts
    1,532
    So...Tuna.....got some tops for me?

  6. #6
    Join Date
    Oct 2003
    Location
    Wisconsin
    Posts
    1,988
    is the fuse required for the pack or why would it need one? too much power? also would this have plenty of power to power an emag and a halo b off the same batt or would it kill it fast? thanks.


    Quote Originally Posted by KCs-RTule
    No fuse. If someone feels they need one, I can install one for $5.00

    -Kristian

  7. #7
    Join Date
    May 2006
    Location
    The Netherlands
    Posts
    819
    Fuse or no fuse, i want one!!

  8. #8
    Join Date
    Oct 2003
    Location
    Wisconsin
    Posts
    1,988
    so the fuse isnt a requirement just an added safety so you dont blow the board or charger?

  9. #9
    Join Date
    Oct 2003
    Location
    Wisconsin
    Posts
    1,988
    ill be in touch, i need a new one soon.

  10. #10
    Join Date
    May 2006
    Location
    The Netherlands
    Posts
    819
    Mine arrived today! Looks good, i like the extra thick wire but i still have to solder the connector on. I think that i'll do that right now.

    Edit:

    Installed the connector and the battery is charging atm. I'm really impressed with the quality of these cells, because these have silicon insulated wires! Those are the best because the outer lining does'nt melt when a short occurs. Also the wire thickness is a big plus but not really needed for a e/xmag, but it gives less resistance than the AGD wires. I've trimmed the wires to about 1,5 inch and used that gray insulator thingie from the original battery for some extra insulation. Maybe not needed, but i added it anyways. Because of the thicker wires the o-ring at the bottom of the pack is left out, but it fits good this way. I can't make any comments yet on the performance, but i'm sure it will be good.
    Last edited by FiXeL; 07-12-2007 at 11:48 AM.

  11. #11
    Join Date
    Aug 2004
    Location
    1000mah Emag Batteries PM me.
    Posts
    1,812
    Always look at your agd pack when connecting the wires to the top guys.

    Glad everything is working good for you thus far, please keep us informed.
    Last edited by KCs-RTule; 07-13-2007 at 02:59 PM.

  12. #12
    Join Date
    Apr 2004
    Location
    Silverdale, Wa
    Posts
    1,093
    This guy is great. If you need something, and he sells it, buy from him.
    stay proud, Stay mechanical!

    And my feed back is at: https://www.automags.org/forums/showthread.php?p=1771790#post1771790

  13. #13
    Join Date
    May 2006
    Location
    The Netherlands
    Posts
    819
    I allready mounted the battery on my mag, but just for you guys i made a short tutorial.

    DISCLAIMER:

    If you have no expierence with soldering whatsoever, have this done by a professional!! I am not responsible if you crew things up! Also my writing could be a bit "off" I live in the netherlands, so my english isn't perfect, please bare with me.


    First we'll need the following items:



    - soldering iron (25 watts will do ya)
    - Wet spunge (for cleaning the solder iron tip)
    - Some solder
    - Cutting pliers (not pictured) for cutting the wire to the correct length
    - X-acto knife or any other sharp knife for trimming the outer lining
    - Tin sucker (that's what we call it over here)
    - Magic marker to mark the positive lead

    Also you could use a 3rd hand (also that's what we call it over here) for some extra comfort:



    You don't really need it, but it makes the job more easy to do. If you have something else to clamp the battery connector, that's fine too.
    First we will be removing the old battery from its casing, with a 9/64 allen wrench. After that mark your positive lead with a magic marker so you will solder the correct wire to the correct lead. (red wire is positive, black negative) You can also de-solder one wire, and put the new one in place, but that's a bit unhandy to do. Just mark the positive lead and desolder them both.



    After that, you would want to use the "tin sucker" and removing all the old solder out of the connectors. Pictured here is only the sucker and already made joints, but the idea is you melt the old solder with your iron, and suck it out when its melted. The sucker has a plunger that you press in, and it releases when you press the black button on the side, sucking in any melted solder. That way you can mount the new wire in the original hole without problem. A short in-and-out is what you want, because the connectors are mounted onto a plastic plate.. If you heat it too long it will melt the plate and you're screwed! Sometimes adding a bit of fresh solder to the iron tip will help removing the old solder. If it takes more than 5 seconds to melt the solder, stop right away and let it cool. Otherwise you could melt the plastic! Also if you have a heavy soldering iron (more than 25 watts) be extra carefull because it will apply alot more heat than a iron like i have will.

    When you cleaned out the old solder, it is time to cut the new battery's wire to the correct length. I've cut mine to about 1,5 inch, rougly the same as the old battery. Cut them one by one and not both in one go. The pack has some charge in it and when cutting both wires you make a short, damaging your tool and your pack.
    After that, take a sharp knife and peel off about 1/4 inch off the outer lining. Do not solder that right away, just twist the ends it so the metal wires keep toghether. Insert one lead into the correct connector hole, and add the soldering iron and some solder. Clean the tip of the iron before going in with the spunge, just a quick wipe will do ya, so you will have a clean tip and fresh solder. Otherwise the solder might not flow correctly and you will have a poor joint.
    Also this has to be done in a quick in-and-out fasion, if you apply too much heat you will damage the plastic of the connector. Just add the iron, then the solder and make sure it flows into the connector and wiring. This action should not take more than 3 seconds to do. After that, wait a minute to let the part cool a bit, and do the other connector.

    When you are done, it should look like this:



    I've added the old insulator plate of the original pack for added security, but it should not be needed. If you make sure the soldering has no sharp edges that can puncture the battery's insulation, you should be good to go. Then mount it back into the case, and monitor its charging. I keep the charger next to me on the desk when charging, so i can monitor if it gets warm/hot. If it gets hot, or the charger, there's probably a short. If you did everything right, the battery should charge and should hardly be warmer when it's charged.

    Well i hope this clears out some things... But if you have very little soldering expierence, i would have somebody else that has do this for you. It's a very simple job, but also easily messed up. So if you aren't comfortable with doing this, have it done by someone who knows what he is doing.

    Have fun with this new pack, i'm pretty sure i will.

  14. #14
    Join Date
    Oct 2003
    Location
    Dover, FL
    Posts
    1,452
    pm sent

  15. #15
    Join Date
    Aug 2004
    Location
    1000mah Emag Batteries PM me.
    Posts
    1,812
    All packs paid have shipped.

  16. #16
    Join Date
    Aug 2004
    Location
    1000mah Emag Batteries PM me.
    Posts
    1,812
    OK, page one has been updated and will be updated with current information regularly. PLEASE see the warning on page one.

    I would like to add testimonials so if you have a pack please comment on it and please remember to leave feedback in my feedback thread.

    -Kristian

  17. #17
    Join Date
    Jul 2001
    Location
    Thompson, Ct
    Posts
    1,935
    Quote Originally Posted by KCs-RTule
    OK, page one has been updated and will be updated with current information regularly...
    -Kristian
    Good idea!





    Got my pack today (with leads pre-attached) It is very professional-looking. Good work, Kristian


    Question, are there any special charging instructions? Should we cycle the pack a few times?

  18. #18
    Join Date
    Aug 2002
    Posts
    353
    i got mine
    Last edited by misfit; 11-14-2007 at 05:57 PM.

  19. #19
    Join Date
    Jun 2005
    Location
    London U.K. 51°30'12.13"
    Posts
    168
    Payment sent for 2 x Complete packs with AGD Tops and clips installed.

    Thank you,

    Sajjad.

  20. #20
    Join Date
    Feb 2003
    Location
    Pullman :)
    Posts
    713
    PM'd you.
    Rehme, Derman 2k, Ryal 999, Lord Whoopass, 50 Cal, Tack, RTrampage and Deathstalker are all good traders

    My Feedback
    https://www.automags.org/forums/showthread.php?s=&threadid=100494

  21. #21
    Join Date
    Feb 2003
    Location
    Pullman :)
    Posts
    713
    Paypal sent

  22. #22
    Join Date
    Aug 2004
    Location
    1000mah Emag Batteries PM me.
    Posts
    1,812
    Those of you that have payments into me, your orders will ship tomorrow night.

  23. #23
    Join Date
    Aug 2004
    Location
    1000mah Emag Batteries PM me.
    Posts
    1,812
    Shipping orders today.

    BUMP!

  24. #24
    Join Date
    Sep 2006
    Posts
    174
    are there anymore available, complete packs? if not do you have an eta for another batch?
    thanks

  25. #25
    Join Date
    Oct 2000
    Location
    North Plains, OR
    Posts
    4,956
    Just sent payment for two battery packs!

  26. #26
    Join Date
    Apr 2006
    Location
    Lancaster Co. PA
    Posts
    141
    PMO is on its way.
    Thanks!

  27. #27
    Join Date
    Feb 2004
    Location
    Ontario, Canada
    Posts
    352
    I'll take one. PM sent

  28. #28
    Join Date
    Aug 2004
    Location
    1000mah Emag Batteries PM me.
    Posts
    1,812
    Swiss Cheeze awaiting payment.
    Ratzo Awaiting MO.

    One and only one pack left.

  29. #29
    Join Date
    Feb 2008
    Location
    Somewhere out west.
    Posts
    461
    Payment sent KC.

  30. #30
    Join Date
    Aug 2007
    Location
    Gainesville, FL
    Posts
    2,600
    PROUD TO ANNOUNCE!

    With the Purchase of a 1000mah Battery from KCs-RTule:

    *FREE Installation of the new battery!

    *40% Emag Lowers Tuning service! (Read more about the service here: http://www.modmymag.com/index.php?op...pper&Itemid=36 )

    To purchase the battery: https://www.automags.org/forums/showt...8&page=1&pp=30

    Once you recieve the battery from KCs-RTule, you will send in the gun and battery for the service.
    When requesting a service please mention this offer. To request a service goto: http://www.modmymag.com/index.php?op...ntact&Itemid=3

    also have an offer on the colored emag screens more info: http://www.modmymag.com/index.php?op...d=25&Itemid=40

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •