Pump Mag Rail Milling

**conbon** · 08-10-2008, 02:46 PM

Hey warped, I was thinking of getting my rail and body miled (if I can get a kit from jay), but I have a question. Can you mill a rail thats already been UL milled by Luke? Here's my rail:

http://i169.photobucket.com/albums/u...5/IMGP1367.jpg

**warpedmephisto** · 08-10-2008, 03:44 PM

Thanks for all of the business, guys!

Conbon - I just recently did pump milling on a ULE rail and I had to make an insert to make up the material for the ramp portion of the milling. So yeah, it is possible, I just have to make an insert so it will take a little bit longer, and cost a little extra. I should post the pics of that insert I made for the other ULE rail.

**skipdogg** · 08-18-2008, 01:55 PM

Got back my rail and body on Friday, played with the body on Saturday and had a great day with it. Excellent work on these, I'm very impressed. Customer service was awesome too, including a very quick turnaround time. THANKS!!

**Grelvire** · 09-02-2008, 11:00 AM

PM'ed you

**Rudz** · 09-02-2008, 03:46 PM

money sent, ill be shipping today

**warpedmephisto** · 09-03-2008, 01:29 AM

Thanks for the business fellas!

**Rudz** · 09-03-2008, 02:30 AM

DAS UNTERMAG!!!!!!!!!! Ooooorah!!!!!!!!! Pumpags ftw

**Madmarx** · 09-08-2008, 08:56 PM

I'd like to have this body

and this rail

milled for pump.

If you can ule mill the rest of the rail at the same time would be cool and mill the lip off the front of the body.

Let me know
Thanks

**Rudz** · 09-10-2008, 12:18 AM

Originally Posted by Madmarx

I'd like to have this body

and this rail

milled for pump.

If you can ule mill the rest of the rail at the same time would be cool and mill the lip off the front of the body.

Let me know
Thanks

oooh ooooh with a rainman229 ccm kit and blue ccm pump handle??

**code 1033** · 09-13-2008, 01:05 PM

pm sent

**code 1033** · 10-03-2008, 11:13 AM

thanks andy !!! got my rail and body back today ... now its off to be ano'ed

**warpedmephisto** · 01-11-2009, 01:23 PM

Hey Guys,

I know its been a while, but I still have all the fixtures and tooling if anyone is still looking to get their bodies and rails milled!

Thank you all for the business!

-Andy

**BigEvil** · 01-11-2009, 02:08 PM

Andy did the pump and mini-ing on my tac pump. Awesome job fast turnaround and a very reasonable price.

**smithy** · 01-14-2009, 11:28 AM

Gotcha

**warpedmephisto** · 01-15-2009, 06:02 PM

All of the shipping information is in the first post of this thread or you can PM me and I can let you know.

-Andy

**Small Block** · 02-19-2009, 12:59 AM

Pump milled my ULE body and milled it down to the lenght of the am/mm rail.

Great job, great communication. Thanks again!

**Loguzzzzzz** · 02-19-2009, 02:58 PM

Are you able to do custom bodies, and RT length slug rails?

I have a XMT ripper body and an AGD slug rail that I would like milled to accept a pump system.

Please let me know if this is possible?

THX

**warpedmephisto** · 02-19-2009, 05:37 PM

RT length rails are no problem. Custom bodies might pose a bit of a problem though. The way my fixture is set up now I'm taking advantage of the cylindrical rear half of the body. For a body with non-cylindrical geometry I'd have to make a new fixture to indicate from the ID of the body. So, I'm afraid that custom bodies are not possible right now.

**XlumberjackX** · 02-20-2009, 09:42 PM

I will be needing a AM/MM rail and a ULE body pump milled here pretty soon after i find out if i can get a pump kit from Jay. Also would like to get ULE body milled down like Small Block. How much extra would that cost?

One more question, sorry

, can i use a ULE body after its been pump milled on a semi Mag?

Thanks.

**warpedmephisto** · 02-21-2009, 12:16 AM

No problem on turning down the body just like Small Block's. Cost is just an extra $10 when you send in the rest of your items to be milled.

There's no problem with switching between a pump and semi setup with a pump milled body - they're interchangeable.

**XlumberjackX** · 02-21-2009, 12:31 PM

Sweet thanks for the info! As soon as i find out if i am able to get a pump kit i will pm'ing you and sending you my parts for milling.

**tbaggin** · 02-22-2009, 02:15 AM

I should be sending out a body to you monday.

**Barsse** · 04-30-2009, 08:02 AM

Do you still take orders? Would love to have a rail and MM body milled for pump!

**warpedmephisto** · 04-30-2009, 09:22 AM

Yep, but I'll have to wait about 2 weeks until I can accept new work.

Originally Posted by Barsse

Do you still take orders? Would love to have a rail and MM body milled for pump!

**Doobie** · 04-30-2009, 09:30 PM

Please post up here when you are ready. I'm interested as well. Just got a pump kit from Jay!

**warpedmephisto** · 05-13-2009, 10:13 AM

Alright, all ready to take on more pump milling jobs. However, I will be on vacation all next week (16th through the 23rd) and I will be unreachable at that time.

**mpsd** · 05-13-2009, 09:25 PM

Andy made his third job to me last month and, as always, it was awesome!

Here are some pics of the guns he helped me building:

On this gun he did:

- Pump body milling
- Pump rail milling
- Cut and thread the old splash AA barrel to make it into a Freak tip

And here he did the amazing CF body:

He also helped me with this gun:

And this one:

Sorry for so many pictures but that really shows how good he is.

**gunangel** · 05-18-2009, 01:17 AM

could you mill this body and rail to accept a pump kit?

if i don't mind some scratches and such?

and in the case jay can't provide a longer pump rod could you cut down the rail to fit the kit?

**BigEvil** · 05-18-2009, 09:23 AM

Hey Gunangel - just an FYI - if that rail has ULE milling, it probably wont work with a pump kit. I would suggest getting warped a photo of the top of the rail

**gunangel** · 05-18-2009, 04:21 PM

oh that would suck, in theory wouldn't you only need two points of contact?

anyways...

thanks for the heads up BE

Thread: Pump Mag Rail Milling

Thread Tools

Display

Posting Permissions