Results 1 to 24 of 24

Thread: The russians are coming!

  1. #1
    Join Date
    May 2006
    Location
    The Netherlands
    Posts
    820

    The russians are coming!

    [Russian accent]
    Comrades, months of buying parts from the capitalist United States has payed off! The ukranian machine factory has modified the design to soviet standards, and it has been approved by the socialist party of the USSR. In wartimes one player will be handed out this marker and the other player next to him a pod. If the player with the marker gets shot, the other player pics up the marker and shoots!
    [/Russian accent]

    Ok, enough BS. You've probably waited just as long as i have, if you were reading my worklog. I've started with a tac-one bought from Geekwarrior and i had the urge to make something custom. This was about a year ago, and now i have 2 tac's. One is pneumatic, and the other is....

    The Sovietmag.

    Without any further ado i present you my most extensive modified marker i currently have.



    Money was a issue at first, but during the project i lost track and it's maybe for the best. Also having this anodised in the states is a very long story, i'll put that at the end if you still want to read it.



    The engravings turned out really nice, and i've filled them in with red paint for polycarbonate RC car bodies. The reason for this is that most spray paints are not resistant to paintball fill. This one is. And there is no risk of rubbing or wear, since all the colored lines are deep inside the parts, so it should hold nicely.



    Also i've copied the original warning text and modified it a bit. And yes, Sovjet is not the way it should be spelled in english, but it's the way they pronounce it in russian, and in dutch so it's fine by me.



    The board has been flased from AGD 2.21 to Xmod 1.8. Also the cracked led screen, rusted magnets and worn sear were replaced, thanks to A-Tach-One.
    The original frame and rail were purchased from a dutch guy, who in turn bought it from a belgian guy. Let me say he did not take care of it the right way...



    Here's the passenger side. Here you can clearly see the russian soldier on the reloader B2 with magna board. This effect was created by masking off the image with vinyl masking, and then bead blasting the shells. Also i've added a remove before flight tag to the battery plug, and some red macroline fittings from macrolineguy.



    Another shot, slightly different angle. I must say that Gruntbull did a very good job annodising her, all the parts match and i'm very sathisfied with the result.



    Yet another... On this one you can see the russian star that started all this... The one on the flip up cover of the red dot scope.



    And another one... Just for your viewing pleasure! Maybe you are asking what happened to that X7 AK-47 front grip i wanted to use?



    Well, i've decided that the marker looks much better without it. Even tho i like the grip, it gives me the option to handle the marker more like a firearm, but it just doesn't look right on this one. A friend of mine pointed this out, and i must agree. I had plans to make a foregrip and grips made out of oak wood, but i think this would not look good on a all black and red gun. This was never a attempt to make a mil-sim gun, but something to my liking.

    Specs:

    - Emag lowers with Xmod 1.8
    - Tac-one CF body
    - X-valve/L10
    - New sear
    - New magnets
    - New led screen
    - New 1000mAh battery from KCs-RTule
    - Custom milled Emag rail
    - Custom milled standard and PTP battery pack
    - Custom RPG subzero feedneck
    - RPG Retent
    - Tunablade
    - Reloader B2 with magna board and magna clutch
    - RF chip (plugged into warp port)
    - SP freak barrel with 14" AA and 16" tactical tip
    - Dye on/off + mini drop
    - Swat force red dot scope
    - Macroline fittings from Macrolineguy
    - Anno by Gruntbull
    - Russian star logo's by http://www.sovietarmystuff.com/

    Thank you!

    I would like to thank the following people for making this possible:

    - The unknown guy selling military surplus at the mahlwinkel biggame
    - Geekwarrior
    - Roguefactor
    - A-Tach-One
    - Todd from GBA
    - Macrolineguy
    - KCs-RTule
    - phizz
    - Pudgey51
    - Anyone i forgot to mention!

    And thanks to all of you who took the time to read all my ramblings.

    Ok, now what took you so long?

    It's a long story, and that is why i put it here, at the end of my post. When i finished the parts for this marker, i shipped them off at the 27th of december 2007 to gruntbull. It took about 2 weeks to arrive, and quite a bit longer than expected for them to annodise the parts. But, there was also the DHL drama. Todd shipped the parts around half april, but shipped as documents so there would be no invoice needed. DHL customs did not accept this, and the package was held. Not knowing what was going on, i called 2 weeks later to find out the whereabouts of my package. It took several phonecalls, a few faxes and alot of patience to find out they've shipped it back allready, and fortunatly for me, Todd picked it up at DHL! I've requested him to ship it USPS instead, and after 2 weeks it was here. This was last tuesday. When i heard they shipped it back, i was told it was returned to the shipper, but Todd told me he did not get anything, so he drove up there and found it! In the meanwhile i was presuming the worst, that it would be lost forever and allready placing a reward for the safe return. Because Todd found the package, i've offered him a $100 reward. Instead of taking it, he told me to donate it to http://www.karindom.bg/

    I will donate $100 in his name for all the trouble he went trough getting my marker back. Because of the lowsy turnaround time i was suspecting that Todd was scamming me, but his gesture of donating the money has made me sure that his heart is in the right place. I will probably do buisness with him again, because he deliveres quality and has taken into account my special request not to annodise the threads of the emag frame that carry the ground to the board, even tho he told me the blood spattered emag worked fine without masking.

  2. #2
    Join Date
    Apr 2006
    Location
    Don' ask questions. It is considered "trolling" in some locations.
    Posts
    4,249
    WOW. that came together quite nicely. Glad to see that you didnt loose it in shipping.

  3. #3
    Join Date
    Feb 2003
    Location
    I wish my grass was Emo so it would cut itself
    Posts
    5,838
    Very nice. I really like the theme.

    MonkeyBallsInferno
    my feedback

  4. #4
    Join Date
    Feb 2006
    Location
    Alhambra, CA
    Posts
    724
    It looks really nice! I like all the fine details and the funny thing is that I am also using an AK-47 handguard, but in a totally different way. Good Job

  5. #5
    Join Date
    Nov 2006
    Location
    Mag shooter since '96 - S
    Posts
    4,566
    Quote Originally Posted by FiXeL
    [Russian accent] In wartimes one player will be handed out this marker and the other player next to him a pod. If the player with the marker gets shot, the other player pics up the marker and shoots!

    if all the russian army can afford is 1 marker and 1 pod then they should just give up now.

    very nice marker. It makes it that much better knowing all the work you put into it.
    Last edited by smoothice; 06-21-2008 at 11:30 AM. Reason: added quote

  6. #6
    Join Date
    Jul 2001
    Location
    California
    Posts
    2,202
    THAT is worth posting about. VERY clean and well planned out. I mean even the warning in Russian that is fantastic. I have never been a big mil-sim guy but I would buy that thing up in a second. Tell me that you have a commander's hat or suit to go with it when you play and I swear I'll be at your next scenario just to hand around you.

  7. #7
    Join Date
    Jun 2006
    Location
    between cleveland/akron o
    Posts
    183
    that marker is just great...its "spetsnaz" for the scenerio game...me being mostly of russian descent (grandparents), like it...how can you not like it, one of a kind........thegrayghost........

  8. #8
    Join Date
    May 2004
    Location
    newport news va
    Posts
    653
    commie bastard


    just kidding, sweet marker. where did you get the bead blasting done? my pneumag is comming back from the anodizer sometime this week and i need the dust shells for my dust gun...

  9. #9
    Join Date
    Dec 2006
    Location
    San Francisco Bay Area
    Posts
    1,417
    WOW!! Of all the tac's I've seen, that one's the best. The tunablade looks so damn good on there.

  10. #10
    Join Date
    Aug 2004
    Location
    Gainesville FL, SoCal, CA
    Posts
    1,680
    Clean looking set-up! Red and black looks great together!

    I love the Russian warning laser engraving


  11. #11
    Join Date
    Aug 2007
    Location
    Gainesville, FL
    Posts
    2,595
    oh no the reds!

  12. #12
    Join Date
    Apr 2002
    Location
    White Sands Missile Range, NM
    Posts
    885
    That has got to be the best-looking Tac-One I have ever seen. Good job!

  13. #13
    Join Date
    Jun 2003
    Location
    FemNu Strip Club
    Posts
    738
    holy moly

  14. #14
    Join Date
    Aug 2006
    Location
    port st. lousey fl origin
    Posts
    2,831
    not only an excellent looking marker , you get the theme of the month/year award
    It's good to see someone using thier mind/ imagination to build a marker

  15. #15
    Join Date
    Apr 2005
    Location
    chicopee, MA
    Posts
    336
    I think it actually looks better with the foregrip...

    SICK E-Tac

  16. #16
    Join Date
    May 2003
    Location
    ENGLAND
    Posts
    1,219
    That is just the best looking gun Ive seen in a while!
    Bolter
    Storm Uk

  17. #17
    Join Date
    May 2006
    Location
    The Netherlands
    Posts
    820
    Thanks for all the great comments you guys!!

    Quote Originally Posted by seekandestroy78
    commie bastard

    just kidding, sweet marker. where did you get the bead blasting done? my pneumag is comming back from the anodizer sometime this week and i need the dust shells for my dust gun...
    I've blasted the shells at work, we have a blasting booth there so this was easy enough to do. The masks i made from vinyl sticker sheet, taping the printed image on top, and started cutting with a Xacto knife.

  18. #18
    Join Date
    Jul 2003
    Location
    Netherlands
    Posts
    236
    Nice work fixel I like the theme you have chosen.

  19. #19
    The Russian text on the underside of the rail is a great touch. Awesome marker!

  20. #20
    Join Date
    Jan 2001
    Location
    WWW.INCEPTIONDESIGNS.COM
    Posts
    3,816
    That is a great looking rig! Very nicely done.

  21. #21
    very nice, you should mod a t2w stock to look like krinkov stock & put a banana clip on it & take it to Red Dawn

  22. #22
    What company did the anno? They will burn for treason.

    Looks great though. Very well done.

  23. #23
    As much as I hate commies...that gun is AWESOME!

  24. #24
    Join Date
    Apr 2007
    Location
    Boulder Hill
    Posts
    419
    Very Very nicely done well worth all the time and effort put into it. The russian text really sets it off nice. You'll be getting my vote in MOTM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •