Introducing the Micromag 2009

**Forest_ptp** · 11-12-2010, 08:54 AM

Originally Posted by Storminnorman

Tracy can you please let us know how much to take off the rt pin so that it will work on the new body THANKS.

It will work as-is and you'll have just enough sticking out to be able to hang your car keys on it... We'll try to remember to get an overall length measurement done today. We did everything possible to make as many parts are as compatible as possible - and since we're talking paintball here I assume that EVERYONE owns a Dremel and a grinder - don't they?

**mt84** · 11-12-2010, 09:42 AM

Tracy PayPal sent for the 2K9 sear pin.

Again thank you very mush....

**Tracy_ptp** · 11-12-2010, 12:21 PM

Originally Posted by mt84

Tracy PayPal sent for the 2K9 sear pin.

Again thank you very mush....

Your welcome very mush!!

**Tracy_ptp** · 11-12-2010, 12:22 PM

OK Sear pin---Overall length is a hair over .700 and the minor diameter of the pin is .500

**Mjlynnjr** · 11-12-2010, 12:23 PM

Paypal sent for a sear pin from me as well. Thanks!

**luke** · 11-12-2010, 12:59 PM

You lost me here>

Originally Posted by Tracy_ptp

and the minor diameter of the pin is .500

The shaft measures .125" on a RTPro pin. (?)

**Tracy_ptp** · 11-12-2010, 03:16 PM

Originally Posted by luke

You lost me here>

The shaft measures .125" on a RTPro pin. (?)

This is the length of the pin from the end of the screw part to the end of the pin.

**Tracy_ptp** · 11-12-2010, 03:19 PM

So Drix decided to drive up and pick up his raw body today. So he officially got the first one so to speak.

He also gave me a peace offtering.

wine was a good choice!!

Here is the rest of the raw parts waiting to go out once the detents arrive, which I received the tracking info and will be here Wednesday.

**luke** · 11-12-2010, 03:27 PM

Originally Posted by Tracy_ptp

This is the length of the pin from the end of the screw part to the end of the pin.

You said diameter..

LOL, I do get what you were saying though.

**Forest_ptp** · 11-12-2010, 03:36 PM

Originally Posted by luke

You said diameter..

LOL, I do get what you were saying though.

It's a chick thing - it was supposed to say "The length of the minor diameter is .500" - Her handwritten notes are sitting right here on her desk at the office and are actually correct.

The only thing is that we thought the .125 diameter of the RT axle was a little flimsy so we beefed it up to 1/4" just to be on the safe side...

**Forest_ptp** · 11-12-2010, 03:39 PM

Originally Posted by Tracy_ptp

So Drix decided to drive up and pick up his raw body today. So he officially got the first one so to speak.

He also gave me a peace offtering.

wine was a good choice!!

Here is the rest of the raw parts waiting to go out once the detents arrive, which I received the tracking info and will be here Wednesday.

I actually had some overnighted (after Tracy left the office) that will hopefully be here on Monday - if not we'll definitely have the ones due in on Wednesday... UPS and Fex-Ex are the ones REALLY making out on this deal...

**Whee McGee** · 11-12-2010, 04:17 PM

Sending a PM your way, Tracy.

**Tracy_ptp** · 11-12-2010, 05:08 PM

Originally Posted by Whee McGee

Sending a PM your way, Tracy.

Back at ya!!

**luke** · 11-12-2010, 05:23 PM

It's a chick thing - it was supposed to say "The length of the minor diameter is .500" - Her handwritten notes are sitting right here on her desk at the office and are actually correct.

I figured it was a typo or something.

The only thing is that we thought the .125 diameter of the RT axle was a little flimsy so we beefed it up to 1/4" just to be on the safe side...

So we'll have to pop the bushing out of a RTPro sear?

**Daze** · 11-12-2010, 05:56 PM

Paid for a sear pin. Thanks!

**going_home** · 11-12-2010, 07:08 PM

Originally Posted by Tracy_ptp

So Drix decided to drive up and pick up his raw body today. So he officially got the first one so to speak.

http://i408.photobucket.com/albums/p...rixM2Kbody.jpg

He also gave me a peace offtering.

http://i408.photobucket.com/albums/p...e/Drixwine.jpg
wine was a good choice!!

Here is the rest of the raw parts waiting to go out once the detents arrive, which I received the tracking info and will be here Wednesday.

http://i408.photobucket.com/albums/p...e/IMG_8881.jpg

You're a bum Drix.

//That is all//

**Drix** · 11-12-2010, 07:20 PM

Like Tracy said I had a chance to run up to PTP today- Being one of the more vocal people about our orders I really wanted to meet the people behind the project and push aside the anonymity of the internet and see what was up for myself. I had a great time, and chatting with Forest and Tracy (I have stacks of questions I diddn't get to ask), and even got a tour of the shop and some insight into new and old projects and had a quick chance to give a peace offering. I've come a long way from being so fed up with PTP that I swore I would never do busniess with them again to purchasing a few extras before I walked out of the shop to venture homeword. Although irritated by the timetable, I'm pleased with the results so far (having not assembled the gun to fire it) and I hope everyone else is too when they recieve theirs.

Anyway, with my body in hand I thought I'd answer some questions we had:

1. The e-mag front block "gap" is .779" long x .102" deep x .056" high- It's really not bad.
2. The breech to rail gap is .027" (to my best determination, my calipers don't fit in there well)
3. Rail width is 1.065" height (under breech) is .490
4. Detent breech dimple: .131 (my ANS detent at .259" tall is the tallest I would go with.
5. Total body width is 1.380

This gun is WAY smaller than the earlier assembled picture we'd seen- I don't know if it's an optical illusion or just because of the prototype but it's really good lookin.

Anyway! Big thanks to Tracy, Forest, and Zoom I bet you guys can't wait to finish things up. I h

**insixdays777** · 11-12-2010, 08:05 PM

Tracy,

Payment sent via paypal for sear pin. thanks!

**p8ntbal4me** · 11-12-2010, 08:29 PM

We are buying sear pins for the bodies,...?

I need 2.

How much and where do I send it?

**Tracy_ptp** · 11-12-2010, 08:49 PM

Originally Posted by p8ntbal4me

We are buying sear pins for the bodies,...?

I need 2.

How much and where do I send it?

$15 and you can send it to ptppaypal@proteamproducts.com

**Tracy_ptp** · 11-12-2010, 08:58 PM

HEY BEEMER!!! People are worried you might come mod my facebook account!! If your are on facebook then you need to be my friend so you can mod my account for me!!

**zondo** · 11-12-2010, 09:26 PM

Originally Posted by Tracy_ptp

$15 and you can send it to ptppaypal@proteamproducts.com

Okay, but as long as the cocker detents pan out on Monday, those are included and we would only need this new sear pin?

I am hoping you post shots of the ano'd bodies before they ship.

**going_home** · 11-12-2010, 09:40 PM

A pic of a standard RT Pro sear pin beside the MM 2009 pin would be nice too.

**Drix** · 11-12-2010, 09:53 PM

Originally Posted by going_home

A pic of a standard RT Pro sear pin beside the MM 2009 pin would be nice too.

**Ruler_Mark** · 11-12-2010, 10:13 PM

Originally Posted by Drix

YOOOOU

**zondo** · 11-12-2010, 10:16 PM

Originally Posted by Drix

That's all you got?

**pbjunky99** · 11-12-2010, 10:16 PM

Tracy, payment sent for a e-mag front and a sear pin.

**Drix** · 11-12-2010, 10:28 PM

Originally Posted by zondo

That's all you got?

Well, Forest did hand me a 47mm grenade launcher, but sadly it would not fit in my box and I had to leave it there

**OPBN** · 11-12-2010, 10:36 PM

Originally Posted by pbjunky99

Tracy, payment sent for a e-mag front and a sear pin.

Were there extra E-mag front blocks? Still interested in a Gloss bladk one if so.

**pbjunky99** · 11-12-2010, 10:37 PM

Originally Posted by OPBN

Were there extra E-mag front blocks? Still interested in a Gloss bladk one if so.

O btw Tracy make mine the same as the rest of my stuff plz. thx

Thread: Introducing the Micromag 2009

Thread Tools

Display

Posting Permissions