Page 22 of 142 FirstFirst ... 121819202122232425263272122 ... LastLast
Results 631 to 660 of 4245

Thread: Introducing the Micromag 2009

  1. #631
    Join Date
    Jul 2005
    Posts
    944
    Quote Originally Posted by p8ntbal4me
    Tracy;

    You have my order correct for the bodies.

    I have a question about the vertical ASA and gadget grips. Will they fit with the E-Mirco Bodies and if so could you get Zoom to render one up to post?

    Im thinking I want a vertical ASA now to match.......

    ~ P8nt
    If you get a emag body and buy the extra mech mag front you can install a vert or vert grip. I will have prices for all by mid week. They are working on the pricing now.

  2. #632
    Join Date
    Jun 2006
    Location
    NH
    Posts
    2,867
    Depending on Price, I may want to add a mech set up to my order...
    Is it too late for that?

  3. #633
    Join Date
    Jul 2005
    Posts
    944
    Quote Originally Posted by Madmarx
    Depending on Price, I may want to add a mech set up to my order...
    Is it too late for that?
    Nope I will have pricing by midweek and then I will have to finalize all numbers so we can get these things on the machines!!

  4. #634
    Join Date
    Aug 2007
    Location
    Gainesville, FL
    Posts
    2,600
    edited
    Last edited by Ruler_Mark; 04-06-2009 at 02:15 PM.

  5. #635
    Join Date
    Dec 2007
    Posts
    358

    Swamps Order

    Mark me down for one E Micro and Two of the Micro Bodies.

    Mark me down for two of the vertical grips.

    Also what part will be needed to convert to a warp. I will need three of warp feednecks if you will be selling those.

    Swamp

  6. #636
    Join Date
    Jul 2007
    Location
    southern MN
    Posts
    414
    Quote Originally Posted by Tracy_ptp
    The vert grip will just bolt on in place of the vertical, it is not a gas thru.

    why is it threaded then? the vert ASA is missing next to my name.

  7. #637
    Join Date
    Nov 2005
    Location
    Sao Paulo - Brazil
    Posts
    2,410
    Quote Originally Posted by Engus
    why is it threaded then? the vert ASA is missing next to my name.
    Yeah, now I'm confused too... It may be hollow and not a gas through but the drawing shows it as it'd go on the standard vertical ASA.

  8. #638
    Join Date
    Dec 2006
    Posts
    2,214
    Quote Originally Posted by mpsd
    Yeah, now I'm confused too... It may be hollow and not a gas through but the drawing shows it as it'd go on the standard vertical ASA.
    My thought too...

    Tracy or Russel, can you clear up the confusion? I think we all see that it's a vert ASA then the non-gas through grip screws in. Is that right?

  9. #639
    Join Date
    Jun 2008
    Location
    Charleston, SC
    Posts
    50
    Tracy,

    My order looks good but, like the other's, I need help understanding all the parts I signed up for.

    I paid the entire amount for the body and just let me know what the balance is I owe you for the other parts llike grip/ASA?.

    Thanks,
    Rod

  10. #640
    Join Date
    Dec 2006
    Posts
    2,214
    Quote Originally Posted by ZoomZ@PTP
    I changed the ball detent area and made a different front block for emicro users .



    I totally missed this!
    Man I'm getting psyched

  11. #641
    Join Date
    Jul 2005
    Posts
    944
    MY BAD!! Sorry I'm a little tired. You will have to have a vert ASA to put any gas thru, grip, etc.... on it including our gadget grip. You don't have to have our grip it is just an option. Sorry guys, I think I am going a little brain dead.

  12. #642
    Join Date
    Jun 2002
    Location
    Where everyone knows your name.
    Posts
    543
    Quote Originally Posted by Tracy_ptp
    MY BAD!! Sorry I'm a little tired. You will have to have a vert ASA to put any gas thru, grip, etc.... on it including our gadget grip. You don't have to have our grip it is just an option. Sorry guys, I think I am going a little brain dead.
    So does this mean that you are only offering a gadget grip, and that the drawing posted on the previous page is it?

    What happened to the gas-thru version?


    I'm not under the alkafluence of inkahol that some thinkle peep I am. It's just the drunker I sit here the longer I get...

  13. #643
    Join Date
    Aug 2001
    Location
    LeRoy, IL, USA
    Posts
    125
    Hey Tracy,

    My order is correct. One micromag body and one gadget grip.

    Thanks, Larry

  14. #644
    Join Date
    Aug 2001
    Location
    LeRoy, IL, USA
    Posts
    125
    Any word on anodizing options/colors yet?

  15. #645
    Join Date
    Feb 2003
    Location
    Pullman :)
    Posts
    710
    I am assuming the MM front comes with the purchase of an MM body, and the that the EM, MM fronts are extras you can order for convertibility? If so then my order is correct.

    Thanks,

    Marlin
    Rehme, Derman 2k, Ryal 999, Lord Whoopass, 50 Cal, Tack, RTrampage and Deathstalker are all good traders

    My Feedback
    http://www.automags.org/forums/showthread.php?s=&threadid=100494

  16. #646
    Join Date
    Jan 2006
    Posts
    608
    Quote Originally Posted by mpsd
    Yeah, now I'm confused too... It may be hollow and not a gas through but the drawing shows it as it'd go on the standard vertical ASA.

    My order is correct, just 1 emicro body - no extra

  17. #647
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    6,940
    Quote Originally Posted by Tracy_ptp
    MY BAD!! Sorry I'm a little tired. You will have to have a vert ASA to put any gas thru, grip, etc.... on it including our gadget grip. You don't have to have our grip it is just an option. Sorry guys, I think I am going a little brain dead.
    OK, I'm not on the list (sent you a PM )I paid through paypal.

    I haven't a clue whats going on with the project, do I really have to read 22 pages to try and figure out whats going on with the project? Sure would be nice if the first post was up to date on whats what.

  18. #648
    Join Date
    Jul 2005
    Posts
    944
    Quote Originally Posted by luke
    OK, I'm not on the list (sent you a PM )I paid through paypal.

    I haven't a clue whats going on with the project, do I really have to read 22 pages to try and figure out whats going on with the project? Sure would be nice if the first post was up to date on whats what.
    I tried to post the new stuff on the first page and it went into overload and wouldn't let me. So I really didn't have a choice. Ask any questions you need or I can direct you to the right page so you don't have to sort.

  19. #649
    Join Date
    Jul 2004
    Posts
    128
    My order is correct for the mm body. I'm not sure about the grip. Will my front grip on my RT pro ULE mount to this body? Depends on the price of the grip as to whether I add one. The color of the body may also be a factor for the grip decision. Also, what are the reasons to get an additional front?

    thanks

  20. #650
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    6,940
    What is a gadget grip?
    I paid for a Micromag, what all was to be included with the original order?
    Was I supposed to get an ASA with my original order?
    Whats the story with the vert grip?
    What is the MM front?
    What is the EM front?
    Last edited by luke; 04-05-2009 at 11:16 PM.

  21. #651
    Join Date
    Mar 2009
    Posts
    34
    Please add an emicro front to my order. With the two types of fronts I will be able to make my body emag or regular length right?

  22. #652
    Join Date
    Dec 2006
    Posts
    2,214

    FAQ's

    I can try to answer some of these, but anyone please correct me if I'm wrong.

    As I understand things:

    What do I get with my purchase of a body?
    Quote Originally Posted by Tracy_ptp
    With the purchase of a Mech body you get the mech front and the rest of the body. $220

    With the purchase of a E-Micro you get an E-Front with the rest of the body. $220

    Extra breech $60
    Extra fronts $50
    Vert ASA $20 raw $25 ano
    Gadget grip $20 raw $25 ano
    Strip and ano your 45 frame $35
    Strip and ano your frame and battery pack $55
    If you want your ASA double tapped $5


    45 Frame needs to be RT Pro Style or original mag frame (NO wings) although you can always mill off the wings.
    Is there the pressed in steel washer?

    Quote Originally Posted by ZoomZ@PTP
    The main reason i upgraded the body design to 7075 material is so there wouldnt be a need
    for the steel washer insert .

    7075 is so hard , there will never be any rolling of metal like you get with 6061 .
    What about the Z slot that I know and love?

    Quote Originally Posted by ZoomZ@PTP
    The Z slot has been replaced with the straight slot like the brits have been using for some time now .
    **Stand by for a full explanation of the bodies**

    There are two different bodies. Mech micro (radiused lip) and Emicro (squared lip)

    This picture is an emicro body with a mech front (note the squared off bottom lip of the body).


    This is a picture of a mech micro body with a mech micro front (note the radiused lip of the body).


    Quote Originally Posted by luke
    What is the MM front?
    <a href=http://i411.photobucket.com/albums/pp198/robzondo/MM09-foregrip1.jpg><img src=http://i411.photobucket.com/albums/pp198/robzondo/MM09-foregrip1.jpg width="600" height="450"></img></a>


    Notice that the very front of the body is squared off just below the block. Russell was thinking about rounding it off to flow better, but the squared off version allows for the EM and MM blocks to be interchangeable on a emicro body and fit flush. You can see why in the rendering of the EMicro front.

    Quote Originally Posted by luke
    What is the EM front?


    The difference between the two is that the EM front has the extension for a battery cover (it's all one piece). Here you can see why Russell went with a squared off body vice the rounded from the mech micromag versions (below).



    Bottom line is that if you get both blocks, it is interchangeable between Emag Lowers or a mech/pneu setup. If you go that route, you need to get this specific ASA to mount a vertical grip of your choice. If you have a mech micro body and put the Emicro front on, there will be a small gap due to the radius of the lip.

    Quote Originally Posted by luke
    What is a gadget grip?
    <a href=http://i408.photobucket.com/albums/pp165/tracy_ptp/Office/MM09-foregrip.jpg><img src=http://i408.photobucket.com/albums/pp165/tracy_ptp/Office/MM09-foregrip.jpg width="600" height="450"></img></a>

    I think we were all confused on this one for a bit. It's simply this grip that is screwed into the ASA (above). The grip is NOT gas through, but the ASA will be tapped on the side.

    Quote Originally Posted by luke
    Whats the story with the vert grip?
    Looks like it's a vert ASA or a vert ASA and the grip combo (price difference= $20 for ASA and $20 for grip so $40 for both). The grip was specifically designed to go with the body.

    Is the vert ASA tapped or not tapped?
    Quote Originally Posted by going_home
    The asa will be tapped on 1 side for a macroline fitting like normal AGD asa's but if you want it tapped on both sides (for a gauge port) theres a small additional charge.
    Quote Originally Posted by Tracy_ptp
    To tap both sides of the ASA, Forest said would be $10 or less.

    What are the anodizing choices?
    Quote Originally Posted by Tracy_ptp
    Just so everyone knows....We will do the dust black and gloss black. And the 3rd and final color will be gloss gun metal grey
    and...

    Quote Originally Posted by Tracy_ptp
    sorry for the confusion with "satin" back in the day flat black was called satin and over the last say 10 years everyone is calling it dust. (I am still used to saying satin) It would be beadblasted and black. I am considering the gloss black, but the polishing part would have to be extra and not included in the original price as that is sent out. We do our own beadblast at the shop.
    There are a lot of Gun Metal Grey versions, what is this version going to look like?
    This is a good idea... there will be proofs made.
    <a href=http://finaltouchpowdercoating.com/mtl/Gunmetal_Grey_Super_Glide.JPG><img src=http://finaltouchpowdercoating.com/mtl/Gunmetal_Grey_Super_Glide.JPG width="600" height="450"></img></a>



    Can I send in my grip frame for matching ANO?

    Quote Originally Posted by Tracy_ptp
    Just the frame? Depends on if it needs to be stripped and polished.
    For just the frame, stripped, polished and ano...$35.00
    Quote Originally Posted by Tracy_ptp
    For anyone wanting your frames, emag lowers etc to be anno'd. You must strip it of all parts, I do not want the responsibility of keeping track of those parts. Also I will have to mark them in an inconspicuous area (such as in grip handle where panels will cover it) so I can make sure you get your correct frame/part back. In order for me to keep the price down, it has to be anno'd together in lots. If the part has to be stripped/blasted/polish I really need to have it at least 1 to 1 1/2 weeks before we are ready to go to ano.
    For Emag lowers (battery and frame): $55
    Airwalk + 2 panels: $35
    Other frames anyone was quoted?



    Does it come with detents? Does it come with feednecks?
    Quote Originally Posted by Forest_ptp
    Feed neck and detent will be installed.
    (post #226)


    Where do I stand? (Balance due, what's coming to me, anno choice)
    See the first post and view the xls spreadsheet.
    Last edited by zondo; 08-27-2009 at 12:55 PM. Reason: Adjusted body descriptions.

  23. #653
    Join Date
    Sep 2003
    Location
    virginia
    Posts
    338
    Tracy,

    I need a vert adapter, but not a gadget grip. I do gas through grips on my setups, so neat at the gadget grip looks, I need just the vert adapter.
    Last edited by robertsr1811; 04-06-2009 at 06:11 PM.

  24. #654
    Dend78 is offline Si Vis Pacem, Para Bellum Feedback Score 1 (100%)
    Join Date
    Oct 2004
    Location
    Indiana
    Posts
    2,969
    my order looks correct i may need to buy just a breech from ya if those will be available
    2k2 Angel LCD
    turbo trigger
    CP volumizer
    PIPE KIT

    2k Angel CnC LCD
    Vert Frame
    Freak Barrel

    B2k x-milled
    micro rock
    Dye sticky 3's
    vertical max-flo
    Edge barrel with blue J&J tip

    Egg 2 y board
    Empire Reloader
    Dye Throttle 91/4500
    Crossfire 114ci/3000
    Angel Air Reg

  25. #655
    Join Date
    Dec 2006
    Posts
    2,214
    Tracy,

    My order is correct, but can you add the Vert ASA & Grip? (1 EMicro, 1 Vert ASA, 1 Vert Grip, 1 MM front)

    -Zondo

  26. #656
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    6,940
    Luke:
    Micro Body w/ASA
    & Vert Grip

  27. #657
    Join Date
    Aug 2007
    Location
    Gainesville, FL
    Posts
    2,600
    So let me get this right, both the micro and E bodies now have the Squared off front and the only difference is the front module?

  28. #658
    Join Date
    Jul 2004
    Posts
    128
    Will I be able to mount my front grip from my RT pro to this body? I'm wanting to keep the gas thru / hose configuration I currently have if possible.

  29. #659
    Dend78 is offline Si Vis Pacem, Para Bellum Feedback Score 1 (100%)
    Join Date
    Oct 2004
    Location
    Indiana
    Posts
    2,969
    Quote Originally Posted by Ruler_Mark
    So let me get this right, both the micro and E bodies now have the Squared off front and the only difference is the front module?
    yes so now there is only one main body and different fronts now so you can mount it all up and it will all look the same


    Quote Originally Posted by Hgblues
    Will I be able to mount my front grip from my RT pro to this body? I'm wanting to keep the gas thru / hose configuration I currently have if possible.
    i dont know if that can be done since the vert ASA isnt gas through if i recall corectly, the grip itself would have to be a tube with one hole on the bottom or low on the side and one at the upper portion of the grip itself. unless you figure out how to oring the main screw hole at the top. which can be done then drill and tap the vert asa portion problem solved.

  30. #660
    Join Date
    Aug 2007
    Location
    Southern California
    Posts
    708
    Whee McGee: Micro body, mm front

    Can't wait to put my Z on this thing.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •