*^*March MOTM Contest*^*

[Smoothice]

TWO DIVISION MOTM Thanks to Tom Kaye and the enduring overseeing AO Mod staff for keeping this thread in order and running smoothly.

MOTM will run 2 categories , Standard Open Class anything goes and an "Old Skool" Mag competition ! !

Please state which division you want to be in (Open or Classic) in case yours could go either way.

Round 3 '10 ! !


"MAG" of the month contest...that means MAGS of any kind.

I want to see some kick butt mags ! ! !

I will do it every month there seems to be continued interest , voting towards the end of each month, new contest on the first-ish of each month.

Near the end of the month I will narrow it down to a Final 3 (or how ever many I think are worthy) and open a public voting poll to pick the winner for each division. Entries are valid until I close this thread.


Rules:

1) Must be your Mag and NOT for sale during the month of the contest.

2) I don't care how great or sucky your pictures are, it's a gun contest not a photogenic prize.

3) 2 pictures MAX , NO GIANT WALLPAPER sized pictures....post a link if you need to or link to any larger pics.


**This is the code to resize and thumbnail your pictures. Copy and paste and add the link where it says to.**

<a href="Picture URL Here"><img src="Picture URL Here" width="600" height="450"></img></a> 

If you can't figure out how to host your pics , I will get them hosted for you.

FYI , It is to YOUR ADVANTAGE to simply post 600 x 450 or so sized pictures , they will look far better than the code resized pictures.

4) One gun entered per month per Class. I'll allow you to enter one (different) marker in each.

5) No previous contest winner entries unless it has changed drastically , give others a shot please.

6) No text posts ...PM all questions to who ever you want to ask what ever you want to ask. Text posts will be removed.


I will be judging on what I think is cool or worthy ...

Generally it breaks down like this-

Open Class MOTM :

As in anything goes as long as it's a mag , wow us.

Just a note ,

I'd really like to see full functioning markers , those will get priority over the same parts just stacked up for a picture.


OldSkoolers :

Looking for anything falling under the guise of Old Skool or in the Spirit of Old skool , SS parts would be cool but that's fairly subjective depending on application. Could be rare , unique or just plain old and still neat. Rusty in a box not exactly the idea here So basically anything that cries yesteryear whether a Classic Custom or just Classic Cool.

Further example:

ule body = not old skool (unless it is so hidden in old skool goodness that I can't tell )
newly produced frames = not old skool
x valve = not old skool



Prizes:

Bragging rights as well as your marker forever honored in the MOTM Winner thread.


Anything "sponsors" want to add at my discretion (contact me first please)


That's it....GO ! ! !

[Gadget]

Open class:

White Wolf Airsmithing freak back with Deadlywind 12" Whip tip, RPG Shadow rail, Exile body, Sub-Zero feedneck, fbm, gas-thru, Triton frame.

[pk5]

Finally assembled so here it is:


Airwalk V2 frame
Phoenix body
Emag battery pack with Luke adapter
AKA javelin twister barrel
clamping feedneck
Fully sleeper pneumag
Articuno engraving by Luke (the one that made the V2 frame)

http://img69.imageshack.us/img69/9069/imgp0203h.jpg


No fair at all bunny, how are we gonna compete with an SFL.

[Engus]

I havent had a decent looking complete mag for a while, and have never entered one of these so Ill give it a shot.

Old Skool: (edit: resized my pictures to 640x480)

[Adam45]

Old Skool:

Micromag clone bodies. Minimag and Minimag reverse valves. Kapp groovy single trigger frames. Bloodwood grip panels. Cocker threaded freak backs with White Wolf fronts. Bottomline mount ASAs with a 7 degree angle. Drop out changers. Custom spring feeds I made with AR15 mounts welded to Aluminium tubes that had been machined to acccept the components inside Ariakon mags.

If a matched set is not acceptable for the rules delete my entry.

[sslecyk03]

Open Class..

Mini Pneumag

Capped X-valve (not pictured)
RPG Pariah Body
Milled RT rail
AKA Sidewinder
AKA No-rise Feedneck
WGP Bullet LPR
Milled and ULE'ed Y-grip
Magnus Talon Trigger
CP Mini Direct Mount
MSV-2 3-way with Magnet Mod
MPA-3 Ram
Custom Foamy Grips
Blacked out screws and macro fittings

[Chris]

Ill put mine in the old skool category

[bunny5]

Orange SFL Emag: #: EMO1567

• 10,12,14in Dye Front
• Polished Dye Back and matching Anodized Dye Back
• Vert Breach Mod with Matching CCM Ring and Polished Ring
• Triggernomics Trigger
• Matching Fireblade
• Matching Tunablade
• LK-13 Polished Double Trigger
• Xmod 1.8 Software
• Yellow LED Screen
• Warp Bracket
• Euro Warp Breach
• 3 Matching Detents
• 3 Polished Black Detents
• Bob Long Gear Drive ASA

This SFL started out originally as a polished silver SFL. It was first owned by a member on AO and was sold in January 2007. The original owner sent it from New York to Virginia wrapped in newspaper in a timberlandbox. The SFL was in pretty rough shape from all the games since 2002. It needed a new battery and had to be overhauled.

I decided to put some carbon fiber stickers to accent his SFL. I sent the breach to RRfireblade in 2008 to get the CCM Feed Tube Mod performed on the marker. It was then put away for a two years until I finally got the urge to finish his SFL Emag project. Before anodizing I had to send my SFL body to Tunaman to get the Steel Ring removed. I then tested a few anodizing companies and chose PK Selective to perform the anodizing.

I wanted to blend colors from a fire into the ano design. Within a month I got his SFL back but it seems as though a part went missing. The bottom of the battery had been lost in the process and was not shipped with the marker. A call to PK Selective found that they could not find the part. Nonetheless, I had an extra bottom and sent it back over to PK to get it color matched. Within a week I got the part back and didn't pay for shipping. He was finally able to finish his Firewash SFL Emag project, but a few things were still missing. I decided to get a few parts polished by LK-13 (AO) and Dan@triggernomics hooked me up with a prototype Emag trigger.

Props to Tunaman, RRfireblade, Dan@triggernomics, LK-13, and Peter@pkselective.

Goto www.sflemag.com for more information!




**Double click on the picture to see hi-res.


**edit** here is the code if needed...

<a href="http://www.sflemag.com/images/motm1picture.jpg"><img src="http://www.sflemag.com/images/motm1thumbnail.jpg" width="600" height="450"></img></a>

<a href="http://www.sflemag.com/images/motm2picture.jpg"><img src="http://www.sflemag.com/images/motm2thumbnail.jpg" width="600" height="450"></img></a> 

[viper-mayhem]

Here is my rendition of a Milsim Marker!
Automag RT Pro ULE Xvalve with RT on/off(.725 shaved pin). Apex barrel. A1 Red/Green dot scope(1x). Green dot laser(for pointing out targets and partial aiming). LED tactical flashlight. Dynaflow adjustable regulator(23bps @ 1000 psi). 88ci Luxfer CF tank. Front and rear AGD scope mounts(front mount modified). 2 point sling(yes its heavy)

I just used this in a woodsball tournament were RT full auto is allowed.

[i8pie2day]

ok well hopefully this counts... it is in the mail, so technically it is mine... (previous owners pics... i couldn't take better ones even if i had it...)

1 of 2 dimple less dalaras that take cocker detents
pneu'd airwalk frame
X-valve
CP on/off

[b-cuzz]

The backup to El Chromo:
#MM01389
32degrees .45 frame
KAPP extender
AJAX red pearlite grips
It's not quite finished, but it's there when I need it.


http://www.mcarterbrown.com/gallery/...m/DSCI0040.JPG

[eelz]

Nothing special really but worth a go;

X-valve
u/l frame
ult
ule rail
no rise clamp
cp direct mount with 0-1200 psi gauge
deadlywind cf barrel
deadlywind cf grip
duel detents.
quick disconnects
1.816 lbs

[XM15]

Custom Emag just back from anodizing,
Custom one off unibody
Blue 10 o'clock X valve lvl10
ULE lowers with Xmod 1.8
Tuna blade
Kila detents
Battery pack lightening milling on cover and
bottom plate.
Custom Aluminum textured grip panels
Anodizing is dust blue with silver acid wash done by Topanodizing "thefool"

http://i211.photobucket.com/albums/b...1/DSCN5964.jpg

http://i211.photobucket.com/albums/b...1/DSCN5965.jpg

[leloup]

Lets try my luck. Oldschool please. My Yellow Jacket.

[chafnerjr]

Open... wasn't going to put it in quite yet as there's a bit more to come, but as it seems to be the month of the maghog trigger so I thought I ought to join in too.

Pewter X Valve w/ULT
Cerberus Airwalk v2 w/Sleeper pneumatics by cyber
Karni Tickler LPR
CP Direct Mount ASA
RPG Priah
RPG Sub-Zero
Dallara Rail
Lapco VA
CP GTG
CP 14" chrome barrel for pic's (I generally play with a DW fibur)
Maghog custom double trigger
Maghog polished anti-thumb screw
Polished/modified frame screw
Everything but the trigger, screws and LPR were polished by LK-13
... everything is continually polished and waxed by your's truly as this is my main marker

The trigger was accidentally gouged during a mod, so I just spent 8 hours hand polishing it back to it's original luster!





For WAY more pic's and in much higher detail visit both pages of this threadhttps://www.automags.org/forums/showt...8&page=1&pp=30

[Stayhuge]

Squeezing in last minute!!!

Dallara body and rail
Chimera frame
15* asa
RPG grip
CP mini direct asa
CCM no pro feedneck
splinter trigger
Freak barrel with WWA tip
BLUE X Valve!!!

Dust Pewter Anno was done by the same company that does CCM's anno. Best quality aftermarket dust anno I have ever seen. Not a single flaw!!!

[Smoothice]

***Closed***

[chafnerjr]

Bump...

[Smoothice]

Bump...

Thanks! And thanks to Beemer. I'm working on it now...