M90 frames deposit. Get on the list now !

[Mole1119]

Tuna PM sent

[elgalloblanco]

Any updates? No big hurry, just curious.

[Magnus]

Any updates? No big hurry, just curious.

A bunch of triggers are done with more on the way and the frames are in the going now. For anyone interested in such things there was a glitch somewhere that we could not work out and had to change the front radius some. It will make it slightly rounder. The machine would literally stop at the same point. It is all better now, but this is the change I had to make.

<a href="http://s401.photobucket.com/albums/pp97/4The_Family/magnus/?action=view&current=2010M90Emancipator.jpg" target="_blank"><img src="http://i401.photobucket.com/albums/pp97/4The_Family/magnus/2010M90Emancipator.jpg" border="0" alt="Photobucket"></a>

Just to make everyone aware, there are a lot of these that were ordered so please be patient. It is going to physically take a bit to get these made.

[Gadget]

Thanks for the update

[Wrathbringer]

That's a random glitch, especially since the machine did an entire batch of Emancipators with the old specs! I wonder what could have caused it?

Anywho thanks for the update Magnus, it's always good to hear about a project even if there isn't much to say.

[Tombola]

Hi. Will the hole for the internal LPR be threaded?

[SSP REAPER]

Hi. Will the hole for the internal LPR be threaded?

Yes, all holes are drilled and tapped.

[kwood]

Hi. Will the hole for the internal LPR be threaded?

sure does
check this thread below if you have any questions about assembly
https://www.automags.org/forums/showthread.php?t=247384

[Magnus]

That's a random glitch, especially since the machine did an entire batch of Emancipators with the old specs! I wonder what could have caused it?

Anywho thanks for the update Magnus, it's always good to hear about a project even if there isn't much to say.

It worked perfect for the prototypes, but would stop dead for each one everytime it hit that part.

[armyboot]

These still available?

[Tunaman]

These still available?

send the deposit now.

[Magnus]

Here are some pictures for you folks this week. We have been very busy with these trying to get them done as quickly as possible.

Here is a picture of the stock that is cut for both the standard frames and some other projects. 89% of this stock will end up as scrap.


Next I face 1 side to clean then flip it over, face the other side and bring it to size. The holes for mounting it to the fixture are drilled next, then the screw holes, trigger pivot, and the safety holes are drilled and reamed. The are used later to locate the blanks on the fixture. This picture shows the finished operation.


After all the plates are machined like this they are bolted on a fixture and the out shape is cut along with the trigger guard. They look like this:


After the 1st tool:


After all the tools:


Here is what the fixture looks like with no plate:



After 5 operations:






Whole pile of grips, kinda gives ya wood doesn’t it?

[arzosah]

Gloss black with talon trigger
paypall sent.

also want a gloss black modded asa and a couple other more mundane goodies you have on your website when it comes time to settle up the rest of the preorder.

[Tunaman]

Gloss black with talon trigger
paypall sent.

also want a gloss black modded asa and a couple other more mundane goodies you have on your website when it comes time to settle up the rest of the preorder.

You are in for one. Thanks!

[Kyu]

God these look great
Cant wait till Tuna gets back to me on these

[tarkus]

Are all the frames gone already?

[Tunaman]

Are all the frames gone already?

You are in for one. Not many left.

[tofunjay]

I maybe interested in a frame. I would want it in Gloss Black with a talon trigger. Are there any left?

[Walking Stick]

In what ways were/are the dimensions different from the Chimera? I know it definitely looks longer (front to rear) with the larger palm swell/hump but how about the height and thickness? Thanks.

[Tunaman]

In what ways were/are the dimensions different from the Chimera? I know it definitely looks longer (front to rear) with the larger palm swell/hump but how about the height and thickness? Thanks.

No idea. The frame is our own design.

[kwood]

In what ways were/are the dimensions different from the Chimera? I know it definitely looks longer (front to rear) with the larger palm swell/hump but how about the height and thickness? Thanks.

hey there friend
i have one of each at home right now
ill see if i cant find some time and get some measurements for you this week

[BigEvil]

Tuna's prototype M90 and my chimera. (Something about digital cameras and led flashes that wash out anno in pics.)

[reckid1986]

so about when will we have to send the rest of the money for these? week-month just an estimate would be nice, theres too much nice stuff selling right now and i just wanna pay for this, so i dont have to worry about not having the cash. thanks

[tofunjay]

I maybe interested in a frame. I would want it in Gloss Black with a talon trigger. Are there any left?

Any left? Wanna to know before I send the $ for a slot

[Tunaman]

Any left? Wanna to know before I send the $ for a slot

send it now. You got the last one for sale.

[Tunaman]

so about when will we have to send the rest of the money for these? week-month just an estimate would be nice, theres too much nice stuff selling right now and i just wanna pay for this, so i dont have to worry about not having the cash. thanks

The frames are just about finished so figure a few more weeks for polish and anno and assembly.

[Ando]

Make sure you tap all my screw holes this time

[tofunjay]

send it now. You got the last one for sale.

WOOOHOOOOO! MINE MINE! lol payment sent.

[KC]

send it now. You got the last one for sale.

Hey Tuna,

Will there be another run for those of us who missed out?

[Walking Stick]

Thanks for the side-by-side comparison BE! It definitely helped. Now I just gotta cross my fingers for a second run or that someone will want to get rid of theirs quickly...