Page 1 of 9 12345 ... LastLast
Results 1 to 30 of 268

Thread: 2010 V.E.R Frame – Pre-Order Information

  1. #1
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580

    2010 V.E.R Frame – Pre-Order Information

    2010 V.E.R Frame – Pre-Order Information

    Guys, we are DONE!

    The new frame design was a hit and we are happy to announce that we are now taking deposits for our production run of the first (25) V.E.R. frames!


    VIDEO!!!!!!!



    If you EVER wanted a vertical electronic frame for your AGD marker, this is the frame for you!

    Pre-Order Deposit = $160.00

    Complete Frame (Matte Black) = $450 + shipping & insurance
    SOLD OUT!!
    Complete Frame (Gloss Black) = $485 + shipping & insurance




    What You Get:
    (1) 2010 V.E.R Frame
    (1) AGD Trigger Return Magnet
    (1) Trigger Axle Pin w/ set screw
    (1) Solenoid w/ set screws
    (1) Set of Panels (black in color) w/ (6) Stainless Steel screws for mounting to frame
    (1) UTB Controller Board w/ Wire Harness, Micro Switch, Capacitor, Power Switch, LED, & 9volt Battery Connector (battery not included)
    (1) Choice of Finish: Matte Black(included in price), Gloss Black(or other color(see Questions section for current pricing), or Raw (un-polished)

    We have (2) triggers to choose from:
    (1) Magnus Talon Trigger w/ (1) Nylon Tipped Travel Screw & (1) Trigger Return Screw (20 available)

    Or

    (1) Fireblade V2 Trigger w/ (1) Nylon Tipped Travel Screw & (1) Trigger Return Magnet (5 available)

    (1) Custom Finish (Anno): You can get whatever color/finish you want other than the (3) finishes offered. Price = TBD by anno shop per customer order. Dependant on complexity of job.

    What you need to have in order to make this frame work on your gun (Minimum):
    (1) An AGD valve system that accepts an AGD ULT on/off assembly (I.E. – X-Valves, E-Mag Valves that have been drilled out, RT Pro Valves that have been drilled out)
    (2) A properly tuned valve system (one that has a properly tuned ULT installed)
    (3) A Rail (RT Classic Rail will not work unless a bushing is installed)
    (4) A Body (we recommend AGD ULE bodies for those wanting Eye Systems installed)
    *Option: You may use a Body & Rail Combo (Uni-body) such as a Pro-Team Products 2000 Micro Mag Body in lieu of a single rail & body


    The 2010 V.E.R Frame weighs only 11.4 oz! (thats with ALL the parts!)


    Questions & Answer Section:

    Q: What does my $160.00 deposit get me?
    A: It assures you a spot in the first run of (25) frames being made. It also doesn’t purchase ANYTHING BUT YOUR FRAME! The other parts to complete the frame have already been purchased!

    Q: What if I change my mind after I pay my deposit?
    A: The $160.00 goes directly to the machine shop to make your frame. Once you send payment, you are locked in for at least (1) frame. If you decide you no longer want your frame, you may sell your spot to another person on your own terms. We will not sell a spot for you.

    Q: Can I get extra milling/engraving?
    A: If you would like some custom milling done to your frame, you best bet would be to order a frame finished raw, and find a shop that will handle custom work per your request. We do not offer any other milling beyond the production model finish.

    Q: Can I get a custom finish done by the same anno shop where all the VER frames are going?
    A: If you would like a different finish other than Matte or Gloss Black, you should select Raw as a finish and send your frame into a shop of your own choice.

    Q: How long will it take to get my frame from the time I send in my deposit?
    A: That all depends on how fast the first (13) frames sell. As soon as they are sold, the machine shop will cut all (25) frames at one time. From there, the first (13) people that bought frames will select their finish choices. Once that is done, the (25) frames will go to anno. Frames will come back, assembly will be completed, and the frames will ship. The first (13) frames will ship upon completion regardless if the remaining frames have been sold.

    Q: What would happen if I paid in full immediately?
    A: Your full payment would be counted as multiple “deposits”. You would have (1) frame on order for certain, and we would allow you to have “first dibs” on the next frame after yours. If you choose not to take more than one frame, the money simply goes to your frame as a normal purchase for a single frame. You would be required to pay for the remaining balance on the second frame, which is $450.

    Q: Can I order more panels as spares?
    A: The first (25) panels are reserved for the production run of frames. If you would like another set of panels, we would have to inquire what that would cost to have them made. The price for that would be more than the cost of a production set since the mold is only being used for a single set rather than a bulk order. It’s doable for a price.

    Q: Can I get my panels in a different color than black?
    A: Again, we would have to ask if that is possible. It would most definitely cost more money for a single set in a different color.

    Q: What type of anodizing am I paying for when I buy this frame?
    A1: If you are choosing Gloss Black, it will be a Type II Anodizing on a High Polished Base
    A2: If you are choosing Matte Black, it will be a Type II Anodizing on a Satin Blasted or Etched Base

    Q: What is Matte Black?
    A: Matte Black is a finish that is black in color and lacks the "shiny" coating to reflect light.
    Picture of a Matte Finish --->http://i383.photobucket.com/albums/o...attefinish.jpg

    Q: What is Gloss Black?
    A: Gloss Black is a finish that is black in color and has a polished look to the coloring, and sports a "shiny" finish.
    Picture of a Gloss Finish --->http://i383.photobucket.com/albums/o...lossfinish.jpg

    Q: Whats the real difference in the two types of anodizing offered?
    A: The Gloss Black Anodizing has 1 extra step(s): high gloss polishing of the frame and a dip coating. The Matte Black has a blasting or etched base rather than a polished base and no dip coating.

    Q: What if I want a different color than Black?
    A: The price for a Matte Black finish is figured into your purchase price. If you want Orange (for example) in a Matte finish,... it will be $20 more. For a Gloss (Black or other color),.. its an extra $35. The price on a SINGLE frame and SINGLE trigger is not $35. $35 covers those customers that combine other parts with other customers to receive a group rate. Single colors of any finish not done in a bulk order WILL be more costly at the customers expense.

    Q: Can the anodizing shop polish my extra parts I want anodized or do I have to do it myself?
    A: You do not need to polish your parts before hand they provide this service for an additional +$10 per piece. You may do the polishing yourself to avoid an extra cost to you.

    **NOTE: if the quality of your own polish work on the parts you send in for anodizing is not "up to par", one of two things will happen: #1 your parts will be anodized as is and finish will reflect your work against theirs (meaning parts may not match) #2: they will not anodize the parts to avoid conflicts.**

    Q: Can the anodizing shop remove existing anodizing on parts I send in to be anodized with my VER frame?
    A: Yes. They will remove existing anodizing on parts you send in FREE OF CHARGE as long as you use them for your anodizing (meaning,... you can NOT get your parts back un-anodized after they have been stripped, they MUST be anodized)


    People on the Pre-Order List:

    1 - PBChappy - - SHIPPED
    2 - chettacheez - - SHIPPED
    3 - rschoi_75 - - SHIPPED - sold to knownothingmags - NEW PANELS SENT
    4 - ninja monkey - - SHIPPED - NEW PANELS INSTALLED
    5 - mpsd - Gloss Black with Talon -Pending final payment
    6 - PAINTHEY - - SHIPPED - NEW PANELS INSTALLED
    7 - smilestyler - - SHIPPED - NEW PANELS INSTALLED
    8 - OPBN - - SHIPPED - NEW PANELS SENT
    9 - splat15k - - SHIPPED - NEW PANELS INSTALLED
    10 - KoolKat - - SHIPPED
    11 - Spazmok - - SHIPPED - NEW PANELS INSTALLED
    12 - going_home - - SHIPPED
    13 - MagPie - PAID IN FULL - SHIPS 4-6-11
    14 - death594 - SHIPPED - NEW PANELS INSTALLED
    15 - SoulCoffin - SHIPPED - NEW PANELS INSTALLED
    16 - RagnaroktA - Gloss Black VER with Talon Trigger (pending payment)
    17 -
    18 -
    19 -
    20 -
    21 -
    22 -
    23 -
    24 -
    25 -
    Last edited by p8ntbal4me; 04-06-2011 at 03:43 AM. Reason: Adding more anodizing information
    _______________________
    Jai "P8ntbal4me" Menard

  2. #2
    Join Date
    Aug 2006
    Location
    West By God Virginia
    Posts
    3,405

    Allways , right after I say " this is my last major purchase " I really don't need ( want ? ) anything else
    I thing this would look good under that E Mag length Chord/Karta I have

  3. #3
    Join Date
    Jun 2009
    Location
    Kentucky
    Posts
    4,144
    Wow. The frame looks awesome!!!

    Glad all the hard work payed off. If I wasn't picking up one of the E-90 frames I would be all over this.

  4. #4
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580
    Quote Originally Posted by Ando
    Wow. The frame looks awesome!!!

    Glad all the hard work payed off. If I wasn't picking up one of the E-90 frames I would be all over this.
    You could always use another E-Frame

    ~ P8nt


  5. #5
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580
    Quote Originally Posted by maniacmechanic
    I thing this would look good under that E Mag length Chord/Karta I have
    I tried it on AM/MM length rails as well,.. everything fits.

    Took alot of work to make sure the AGD bike grip would mount in any and all cases.

    ~ P8nt


  6. #6
    Join Date
    Jun 2009
    Location
    Kentucky
    Posts
    4,144
    Quote Originally Posted by p8ntbal4me
    You could always use another E-Frame

    ~ P8nt

    We'll see.

    If you have a few left in a couple of months, I'll pick one up for sure.

  7. #7
    Join Date
    Jul 2006
    Location
    Blythewood SC
    Posts
    469
    Add me to the list Full payment sent
    Last edited by PBChappy; 07-03-2010 at 11:55 AM.

  8. #8
    Join Date
    Apr 2004
    Location
    New Lenox IL
    Posts
    369
    Pmed you



    Edit: 7/5/2010
    Deposit sent
    Last edited by chettacheez; 07-05-2010 at 12:21 PM.

  9. #9
    Join Date
    Jul 2004
    Location
    Iowa
    Posts
    291
    i really shouldnt spend that much but.... but.... but, oh god. is it me or does the MicroMag not look quite, err, even?

    also, i dont have any experience with Micros so any pics of one on a regular RTPro? the frame looks like it sits a little futher forward.

  10. #10
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580
    Quote Originally Posted by KillerOfGiants
    i really shouldnt spend that much but.... but.... but, oh god. is it me or does the MicroMag not look quite, err, even?

    also, i dont have any experience with Micros so any pics of one on a regular RTPro? the frame looks like it sits a little futher forward.
    The frame works with all AGD rails. So to boot,.. the frame sits no further forward than any other vertical frame you can get your hands on right now. Everything has to work with the sear and valve,...

    The trigger however,.. has been moved to the rear slightly to shorten the trigger pull activation point on the switch.

    The bottom of the frame is level with the bottom of the fore grip (which is a genuine PTP product )

    If you need more pictures to help out,.. let me know guys!

    ~ P8nt


  11. #11
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580
    Quote Originally Posted by maniacmechanic
    I thing this would look good under that E Mag length Chord/Karta I have
    What color are the parts? Im trying to get 2 frames anodized to help everyone decide.

    ~ P8nt


  12. #12
    Join Date
    Jun 2010
    Location
    So Cal
    Posts
    188
    Deposit sent.
    Dust Black Please.
    Last edited by rschoi_75; 07-08-2010 at 11:54 AM.

  13. #13
    Join Date
    Jul 2004
    Location
    Iowa
    Posts
    291
    Quote Originally Posted by p8ntbal4me
    The frame works with all AGD rails. So to boot,.. the frame sits no further forward than any other vertical frame you can get your hands on right now. Everything has to work with the sear and valve,...

    The trigger however,.. has been moved to the rear slightly to shorten the trigger pull activation point on the switch.

    The bottom of the frame is level with the bottom of the fore grip (which is a genuine PTP product )

    If you need more pictures to help out,.. let me know guys!

    ~ P8nt

    that was my bad, the micro pic just looked a little off. does the frame use angel grips or any other that are commonly used? or are they one-off? also, it may be another picture illusion but is the trigger guard area the same size as an intelli? sorry about all the questions, i just didnt catch all the concept posts and whatnot. any video with the frame?

  14. #14
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580
    Quote Originally Posted by KillerOfGiants
    does the frame use angel grips or any other that are commonly used? or are they one-off?
    Any Vertical Angel grips will fit.. but these grips have a cut out in the back specific for the solenoid,.. similar to e-blade grips

    Quote Originally Posted by KillerOfGiants
    also, it may be another picture illusion but is the trigger guard area the same size as an intelli?
    Its slightly less on the lowest point of the trigger,.. but longer behind the trigger. I find that with the lower trigger guards I can get higher rates of fire.

    Quote Originally Posted by KillerOfGiants
    any video with the frame?
    I sent out all my tanks to get re-hydro-ed... and Im getting married this weekend,... so no video until both are finished/completed!

    ~ P8nt

  15. #15
    Join Date
    Feb 2005
    Location
    Texas
    Posts
    9,305
    Quote Originally Posted by p8ntbal4me
    Im getting married this weekend,...
    ~ P8nt

  16. #16
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580
    I sent the proto-type out to get anoed with a rail and body,.. and some other parts.

    We have settled on an Anodizing company with a good track record and that has done Paintball items before.

    Once we fill the remaining pre-order seats,.. they will move along very quickly!

    ~ P8nt


  17. #17
    Join Date
    Nov 2005
    Location
    Sao Paulo - Brazil
    Posts
    2,777
    Do you have any pictures of the frame internals? As I understand, this frame is purelly electro meaning it doesn't use any pneumatics nor it needs an LPR, is that right?

    What kind of board do they use and does such board have an updated software?

    At last, do you already have all the necessary parts (boards, switches, noids etc)? Sorry to ask this but you do know that there were at least two attempts of special frames that got stuck for the lack of parts, right? I'm talking about the e-pneu UMF and the DevilMag frames.

    I'm considering getting a gloss black one and will respond as soon as possible (next couple of days).

    Thanks and congrats on the iniciative,

    Mendel.

  18. #18
    Join Date
    Jun 2009
    Location
    Kentucky
    Posts
    4,144
    https://www.automags.org/forums/showt...1&page=3&pp=30

    Scroll down the page. It will answer your questions.

  19. #19
    Join Date
    Nov 2005
    Location
    Sao Paulo - Brazil
    Posts
    2,777
    Thanks! That really answers it! I'm in!

  20. #20
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580
    Quote Originally Posted by mpsd
    Do you have any pictures of the frame internals? As I understand, this frame is purelly electro meaning it doesn't use any pneumatics nor it needs an LPR, is that right?
    It needs no LPR,.. pure electro.

    Quote Originally Posted by mpsd
    What kind of board do they use and does such board have an updated software?
    Originally,.. the frame would use my new Board. Since that is taking some extra time, I will be using UTBs to power them. The software in the UTBs doesn't disappoint for what this frame needs. High rates of fire in Semi-Auto are easy to obtain.

    Quote Originally Posted by mpsd
    At last, do you already have all the necessary parts (boards, switches, noids etc)? Sorry to ask this but you do know that there were at least two attempts of special frames that got stuck for the lack of parts, right? I'm talking about the e-pneu UMF and the DevilMag frames.
    I have everything BUT the frames. The Logic EM Ripper frames electronics were done by me. You can head over there to the thread to take a look for yourself when you get a moment. The Devil Mag issue wont happen with these frames. I have literally all the parts (and then some) to build these frames. Your deposit pays for the frame,... that's it.


    Quote Originally Posted by mpsd
    I'm considering getting a gloss black one and will respond as soon as possible (next couple of days).
    They are starting to be machined this week,,...... hope to see them in a few weeks following. You have a little time.

    ~ P8nt

    Last edited by p8ntbal4me; 07-08-2010 at 04:08 AM.

  21. #21
    Join Date
    Jun 2007
    Location
    There is no Spoon
    Posts
    1,827
    Ok P8nt, sign me up for one. Get me your paypal addy so I can transfer the funds.

  22. #22
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580
    Quote Originally Posted by wetwrks
    Ok P8nt, sign me up for one. Get me your paypal addy so I can transfer the funds.
    You got a PM!

    ~ P8nt


  23. #23
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580
    I will be off line until at least Monday.... leave any questions or whatnot here and I will answer them when I get back!

    ~ P8nt

  24. #24
    Join Date
    Oct 2001
    Location
    Maine, New York
    Posts
    1,227
    Quote Originally Posted by p8ntbal4me
    ...an Anodizing company with a good track record and that has done Paintball items before.
    I don't understand.

    Congratulations on your impending marriage, sir!

    Also, very nice job on these frames; I will try to scrounge up the funds and join in on the fun!

  25. #25
    Join Date
    Nov 2005
    Location
    Sao Paulo - Brazil
    Posts
    2,777
    Deposit sent for a Gloss black with a Magnus trigger!

  26. #26
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580
    Quote Originally Posted by mpsd
    Deposit sent for a Gloss black with a Magnus trigger!
    Your In!

    ~ P8nt


  27. #27
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580
    Anyone else looking to get on the order?

    ~ P8nt


  28. #28
    Join Date
    Oct 2002
    Location
    Saskatchewan
    Posts
    975
    I am interested. But I don't want black lmk some costs on diff ano.

  29. #29
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580
    Quote Originally Posted by smilestyler
    I am interested. But I don't want black lmk some costs on diff ano.

    I need to know what you want for a color.

    I also need to know Matte or Gloss

  30. #30
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580
    Quote Originally Posted by smilestyler
    I am interested. But I don't want black lmk some costs on diff ano.
    I havent heard back from the anno shop,.. so im going to say that its going to be at least $50. Plan on that.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •