could be there is no screw in the frame going through the rail and into the body so the grip frame is just a little slanted? that's how it looks for me...Originally Posted by mpsd
could be there is no screw in the frame going through the rail and into the body so the grip frame is just a little slanted? that's how it looks for me...Originally Posted by mpsd
The LED on the board is RED indicating SEMI. Jai has fast fingers
Yes,.. its because of the rail. Its ULE milled and its made to work on an E-Mag due to its length.Originally Posted by mpsd
I however, like the rail as a longer setup,... and being ULE helps a bunch with weight.
In the future, I would like to make a frame that is custom fit to a rail and body,.. but there is a small market for such things.
Thats SEMI uncapped!Originally Posted by mpsd
_______________________
Jai "P8ntbal4me" Menard
Oh duuuuh,.... I didnt even see what picture you were looking at! LOL!Originally Posted by kcombs9
Yes,.. the frame is slightly slanted due to there being no screws (front or back) holding it together.
I have it all together now,.. and the gap is still there,.. but its due to milling for ULE.
UPDATE
Frames will be done this week!
If you have not confirmed your anodizing and trigger choice,.. please post up here so I can mark you down.
We will now be taking deposits for anodizing.
The deposit is $100. <---- anodized frame & trigger
Those of you getting Matte finish, remember your anodizing is figured into the total cost of your frame.
Those of you getting Gloss finish, you can settle the difference up at the final payment.
Frames will be anodized as their owners have paid for them,.. we will NOT be waiting for everyone MORE than 2 WEEKS <---- please ensure you understand this! I would like to keep the delays to a MINIMUM!
~ P8nt
Ohhhahhh nice video what no eye on your prototype?
Hoping running an eye to get away from the lvl 10 and gets a little more efficiency for rec ball.
Nice
Originally Posted by PAINTHEY
I was going to ,.. but my eye covers are not made for the body I used.
Im sure I could get some help in designing some kind of milling on the body to make them work,.. but the level ten works fine.
On the other test body,. I used eyes.
Remaining balance sent today.
UPDATE
Got 2 more videos for you guys to take a look at
ROF was 18 and the debounce was over 30..... so no extra shots!
P8nt shooting the VER
Mongoose shooting the VER
ZERO chops folks! I used it a little on Saturday in the range to make videos and I used it Sunday for 3 games (over 1000 rounds). You can hear the Level 10 kick in for Mongoose a few times,... no need for eyes if you don't want them!
I updated your information!Originally Posted by rschoi_75
UPDATE
I have a valid tracking number on the frames for those of you guys that are on the pre-order.
We are right on track.
Box was already mailed and shipped,... & insured just in case
~ P8nt
Originally Posted by p8ntbal4me
Sweet cant wait woot woot
Alright Jai, I've finally convinced my wallet to cough up the funds. I'll take one in gloss black with a talon trigger. I also have one of Ryan's frames to send in for ano while I'm at it. Shoot me a PM with your paypal address and I'll get this rollin'. By the way, nice work sir!
Sent you a PM with all the info,.... pending your PM back Sir!Originally Posted by splat15k
PM returned. Deposit sent for the frame and the ano.
Added you in! Noted on the first postOriginally Posted by splat15k
Originally Posted by p8ntbal4me
How much do I have to add to change that matte to a gloss? Is that why it says pending?
The Matte finish is added into the purchase price of $450.Originally Posted by splat15k
A Gloss finish in any color (which you want) is an extra $35
So your total will be $485 in the end
** The Q & A section better explains the anodizing options **
It says "Pending" because I was a little tired when I added you in,.. sorry! I made the change to it now. You should see the notes reflect what you have committed to so far.Originally Posted by splat15k
Roger that sir; thank you for the quick clarification.
UPDATE
I had a package delivered today
Inside was a bunch of bubble wrap
When I dig into the box,.... look what I found!
At this point,... We are going to send out frames to be anodized.
If you haven't sent in your deposit for anodizing,... please do so when you can.
I also need to hear from you guys that are sending in additional parts or just the one frame.
Jai,
Please change my ano selection to gloss black.
I will get back to you as soon as I figure out which parts I will be sending your way.
Thank you sir!
Originally Posted by splat15k
Done,.. and your welcome
Frames, triggers (Talons, Fireblade V1, Fireblade V2) and other parts will leave this week to anodizing for SURE!
If you are sending in parts to be anodized,..... you need to give me an update!
I will hold your frame back if you want,.. everyone else frame will be leaving this week (maybe as soon as today!!!!)
Deposit for frame + anno sent!
Dust black!
Good timing. Weather is cooling off and Im getting all itchy to play.Originally Posted by p8ntbal4me
well I've mulled it around for 2 months and I think it's time I commit. would you be so kind as to pm me your paypal info and amount owed for 1 V.E.R. frame, gloss black with talon trigger.
Originally Posted by Spazmok
PM sent
Frames that have been paid for and customers whom have confirmed (without any doubt) their anodizing choices are shipping tomorrow!!!!
I forgot to post here but sent you a PM. You did get my payment, right? Just would like a confirmation, please. Also, please remember I'm in for a gloss black with a Talon trigger.
Thanks!