Logic Paintball - Everything Automag Clearance SALE!
While I was buttoning up the whole UEF debacle, I managed to unearth a bunch of Mag stuff I had buried on the shelf, which I had forgotten about.
Here's the thread where someone buys all of it.
First off we've got the left over parts from the UEF project.
After the smoke cleared, I found that had seven (7) bolt-on kits left to sell.
Three (3) UEF Kits are SOLD.
Four (4) are still available.
They are unanodized, except for one, which was poorly anodized blue.
Love the blue color on that one, but the ano shop did a crap job on prep, so it'll need to be redone. At least they didn't polish it to death like some places do. Reano shouldn't be a problem because of that.
Price for each kit is $350 + shipping. They come totally unassembled and unanodized.
They come with all the hardware, screws, orings, pins, bearing, hose, etc, necessary to assemble the frame.
I'll even include a set of grips (your choice, red or blue).
The only thing you will need that I will not be supplying (because I'm out of them) is an LPR. Any autococker LPR with a 1/8" NPT mount will work.
The electronics are all included, and totally assembled, all you have to do is bolt them into the frame. No soldering required.
All of the following parts are brand new from AGD, never even drooled on before.
Two (2) brand new X-Valves with LVL X bolts Both SOLD!
Two (2) brand new EMag rails with rail bushings ($45 each + shipping) - One SOLD:
Continued . . .
Last edited by CoolHand; 05-10-2012 at 05:22 PM.
One (1) used ULE body ($75 + shipping):
Pics to come.
EDIT: Pics are here:
Most all that you see on the surface is fingerprints and smudges. There are no other scratches, dents, dings, blemishes in the finish, except that spot where the nickel flaked off in the first picture.
To the naked eye, it is in excellent condition (save for the aforementioned flaked spot), but nickel plate is very hard to take good pictures of, because the flash either washes the surface out, or shows every little thing on the surface.
It is in good shape though.
I also have two (2) LVL X bolt kits, with full carrier sets, all three springs, extra shims, extra orings, spare foamies, etc. One is in its box, with the CD, the other is not. I will include a regular sized CD with the instructions on it though, so you're only short the little plastic box.
Both are used, but in good shape. One power tube tip had the wrench flats slightly mangled by some ham-fisted fool before I got it, but it functions and installs without issue.
Price for either kit is $50 + shipping and insurance.
That does it for the new AGD parts.
But there is still more to come. . . .
Last edited by CoolHand; 08-28-2010 at 07:25 PM.
When NPS got bought out and became Kee Sports some years back, I bought all their Mag stuff (which was not a lot). Here's what I've got left from that:
Various Feednecks to fit ULE bodies (or Angels) ($15 ea + shipping).
(2) Black CCM's - Both SOLD
(2) Black AKA's - Both SOLD
(1) Raw AKA- SOLD
(1) Raw stock AGD
(2) Black NDZ (twist locking, oring grip)
(2) Silver NDZ (same)
32 Degrees Classic Mag Vertical Adapters ($5 ea + shipping).
(10) Black - Six (6) SOLD
All include the required mounting screw.
RTP Bike Foregrips All SOLD.
(2) Brand New - Bare Both SOLD
(2) Brand New - With RTP VA Both SOLD
(1) Brand New - Blemished SOLD
This concludes the NPS refugees.
More stuff to come though . . . .
Last edited by CoolHand; 09-02-2010 at 02:00 AM.
I also found a couple of boxes of Logic parts that have long been discontinued, and that I thought I was totally out of.
Blue Ano'ed Second Generation UMF SOLD!:
Again, the ano sucks, and will probably need to be redone, but it is so thin that the reano shouldn't be a problem at all. Will come with trigger and safety installed.
Continued . . .
Last edited by CoolHand; 08-20-2010 at 04:31 PM.
Various Emag Triggers All SOLD:
(1) Blue Fireblade (will come with adjuster & magnet) - SOLD
(1) Black One of a Kind Prototype that I never produced - SOLD
(1) Raw First Gen Logic Blade - SOLD
(1) Stock AGD EMag Trigger (includes adjuster & magnets) - SOLD
Group of VMF V1.0 Triggers ($5 for all of them + shipping):
Two Used Rails ($15 ea + shipping) - RTP Rail SOLD:
(1) RTP rail used for e-frame testing. Cut inside for eye wire clearance. Unblemished on the outside. - SOLD
(1) Well used Classic Mag Rail
That concludes the random Logic Parts.
One more post to go . . . .
Last edited by CoolHand; 08-28-2010 at 07:26 PM.
Last up is the final remaining Automag in my collection.
Uber Classic Automag All Parts Now SOLD:
It has a classic valve, third gen UMF, SuperULE rail, stubby foregrip (which I think was actually made by Rogefactor ), Hogue grips, a ULE body with CCM clamping feed, a Shocktech drop, a super rare (and now unobtainable new ) Smart Parts On/Off ASA, and an even rarer and even much more harder to get Smart Parts first gen All American Barrel (which shoots quite well).
I will part this marker for the following prices:
Valve w/LVL7 Bolt - $75 (I still have the blank warranty card on this valve, it is nearly new.) - SOLD
SuperULE Rail - $75 - SOLD
Foregrip - $15 - SOLD
3rd Gen UMF - $75 - SOLD
ULE Body & Feed Neck - $75 - SOLD
Drop, ASA, Lines, Fittings, Etc - $15 - SOLD
Barrel - $15 - SOLD
That is all.
I accept PayPal, checks, and money orders, and I ship USPS Priority Mail.
The price of shipping is not included for anything listed in this sale.
Last edited by CoolHand; 09-02-2010 at 02:02 AM.
OMGwtfLOL RPG parts.....lolol
I'll take ;
I also have Two (2) brand new Slug Rails ($45 each + shipping):
Alpha Rail (use Classic Sear & VA).
(1) Good Finish + VA - $45 + shipping
PM me a total cost
If Rudz didn't take it, I'll go for the RPG foregrip parted off the classic mag.
I will take one of the bike grips w/VA, pming you for info
All PM's replied to, except for the one guy who's inbox was full, but the parts he wanted were already spoken for anyway.
RTP Bike Foregrips ($10 ea + shipping).
Brand New - With RTP VA
I'll take one with the vertical adapter.
Originally Posted by audioSLAVE
Total is $17.90 including shipping.
PayPal can go to firstname.lastname@example.org
I'll take one of the black CCM feednecks. Shoot me a PM w/ total and paypal address.
Pm'd about the black ule w/ aka feedneck
PM's replied to.
Prices are already pretty durned low, but whatever.
Originally Posted by GT
Go ahead and make me an offer, but if you lowball me, I may ridicule you in a general fashion and/or make insinuations about your heritage.
Just so you know going in.
damn, some sweet stuff on here. maybe its time for some dealer's to do a serious spring cleaning and see what other goodies you come up with.
All PM's replied to.
All PM's replied to, again.
I will take the blue fire blade trigger, 2 black classic VA, a new bike grip and a black CCM feed neck. I am in BC, Canada. Please let me know the total including shipping. Will paypal you on Thurday. (Will out town tomorrow!) Thank you.
You've got a PM with your total.
Originally Posted by yellowzuk
All PM's replied to.
All PM's replied to, and everything bought and paid for before 8/3/10 has been shipped.