Page 1 of 3 123 LastLast
Results 1 to 30 of 70

Thread: Logic Paintball - Everything Automag Clearance SALE!

  1. #1
    Join Date
    Jan 2003
    Location
    Missouri
    Posts
    3,770

    Logic Paintball - Everything Automag Clearance SALE!

    While I was buttoning up the whole UEF debacle, I managed to unearth a bunch of Mag stuff I had buried on the shelf, which I had forgotten about.

    Here's the thread where someone buys all of it.

    First off we've got the left over parts from the UEF project.

    After the smoke cleared, I found that had seven (7) bolt-on kits left to sell.

    Three (3) UEF Kits are SOLD.
    Four (4) are still available.


    They are unanodized, except for one, which was poorly anodized blue.

    Love the blue color on that one, but the ano shop did a crap job on prep, so it'll need to be redone. At least they didn't polish it to death like some places do. Reano shouldn't be a problem because of that.

    Price for each kit is $350 + shipping. They come totally unassembled and unanodized.

    They come with all the hardware, screws, orings, pins, bearing, hose, etc, necessary to assemble the frame.

    I'll even include a set of grips (your choice, red or blue).

    The only thing you will need that I will not be supplying (because I'm out of them) is an LPR. Any autococker LPR with a 1/8" NPT mount will work.

    The electronics are all included, and totally assembled, all you have to do is bolt them into the frame. No soldering required.


    Pictars:









    All of the following parts are brand new from AGD, never even drooled on before.

    Two (2) brand new X-Valves with LVL X bolts Both SOLD!



    Two (2) brand new EMag rails with rail bushings ($45 each + shipping) - One SOLD:





    Continued . . .
    Last edited by CoolHand; 05-10-2012 at 04:22 PM.

  2. #2
    Join Date
    Jan 2003
    Location
    Missouri
    Posts
    3,770
    One (1) used ULE body ($75 + shipping):

    Pics to come.

    EDIT: Pics are here:













    Most all that you see on the surface is fingerprints and smudges. There are no other scratches, dents, dings, blemishes in the finish, except that spot where the nickel flaked off in the first picture.

    To the naked eye, it is in excellent condition (save for the aforementioned flaked spot), but nickel plate is very hard to take good pictures of, because the flash either washes the surface out, or shows every little thing on the surface.

    It is in good shape though.

    I also have two (2) LVL X bolt kits, with full carrier sets, all three springs, extra shims, extra orings, spare foamies, etc. One is in its box, with the CD, the other is not. I will include a regular sized CD with the instructions on it though, so you're only short the little plastic box.

    Both are used, but in good shape. One power tube tip had the wrench flats slightly mangled by some ham-fisted fool before I got it, but it functions and installs without issue.


    Price for either kit is $50 + shipping and insurance.


    That does it for the new AGD parts.

    But there is still more to come. . . .
    Last edited by CoolHand; 08-28-2010 at 06:25 PM.

  3. #3
    Join Date
    Jan 2003
    Location
    Missouri
    Posts
    3,770
    When NPS got bought out and became Kee Sports some years back, I bought all their Mag stuff (which was not a lot). Here's what I've got left from that:

    Various Feednecks to fit ULE bodies (or Angels) ($15 ea + shipping).

    (2) Black CCM's - Both SOLD
    (2) Black AKA's - Both SOLD
    (1) Raw AKA- SOLD
    (1) Raw stock AGD
    (2) Black NDZ (twist locking, oring grip)
    (2) Silver NDZ (same)







    32 Degrees Classic Mag Vertical Adapters ($5 ea + shipping).

    (10) Black - Six (6) SOLD
    (5) Silver

    All include the required mounting screw.



    RTP Bike Foregrips All SOLD.

    (2) Brand New - Bare Both SOLD
    (2) Brand New - With RTP VA Both SOLD
    (1) Brand New - Blemished SOLD



    This concludes the NPS refugees.

    More stuff to come though . . . .
    Last edited by CoolHand; 09-02-2010 at 01:00 AM.

  4. #4
    Join Date
    Jan 2003
    Location
    Missouri
    Posts
    3,770
    I also found a couple of boxes of Logic parts that have long been discontinued, and that I thought I was totally out of.

    Blue Ano'ed Second Generation UMF SOLD!:





    Again, the ano sucks, and will probably need to be redone, but it is so thin that the reano shouldn't be a problem at all. Will come with trigger and safety installed.

    Continued . . .
    Last edited by CoolHand; 08-20-2010 at 03:31 PM.

  5. #5
    Join Date
    Jan 2003
    Location
    Missouri
    Posts
    3,770
    Various Emag Triggers All SOLD:

    (1) Blue Fireblade (will come with adjuster & magnet) - SOLD
    (1) Black One of a Kind Prototype that I never produced - SOLD
    (1) Raw First Gen Logic Blade - SOLD
    (1) Stock AGD EMag Trigger (includes adjuster & magnets) - SOLD





    Group of VMF V1.0 Triggers ($5 for all of them + shipping):





    Two Used Rails ($15 ea + shipping) - RTP Rail SOLD:

    (1) RTP rail used for e-frame testing. Cut inside for eye wire clearance. Unblemished on the outside. - SOLD
    (1) Well used Classic Mag Rail





    That concludes the random Logic Parts.

    One more post to go . . . .
    Last edited by CoolHand; 08-28-2010 at 06:26 PM.

  6. #6
    Join Date
    Jan 2003
    Location
    Missouri
    Posts
    3,770
    Last up is the final remaining Automag in my collection.

    Uber Classic Automag All Parts Now SOLD:

    It has a classic valve, third gen UMF, SuperULE rail, stubby foregrip (which I think was actually made by Rogefactor ), Hogue grips, a ULE body with CCM clamping feed, a Shocktech drop, a super rare (and now unobtainable new ) Smart Parts On/Off ASA, and an even rarer and even much more harder to get Smart Parts first gen All American Barrel (which shoots quite well).





    I will part this marker for the following prices:

    Valve w/LVL7 Bolt - $75 (I still have the blank warranty card on this valve, it is nearly new.) - SOLD
    SuperULE Rail - $75 - SOLD
    Foregrip - $15 - SOLD
    3rd Gen UMF - $75 - SOLD
    ULE Body & Feed Neck - $75 - SOLD
    Drop, ASA, Lines, Fittings, Etc - $15 - SOLD
    Barrel - $15 - SOLD


    That is all.

    I accept PayPal, checks, and money orders, and I ship USPS Priority Mail.

    The price of shipping is not included for anything listed in this sale.



    Last edited by CoolHand; 09-02-2010 at 01:02 AM.

  7. #7
    Join Date
    Jul 2008
    Posts
    959
    Pm'd on trigger(s)

  8. #8
    Join Date
    Apr 2005
    Location
    a toda madre o un desmadr
    Posts
    5,085

    Talking

    OMGwtfLOL RPG parts.....lolol

  9. #9
    Join Date
    Aug 2006
    Location
    West By God Virginia
    Posts
    3,405
    I'll take ;
    I also have Two (2) brand new Slug Rails ($45 each + shipping):
    Alpha Rail (use Classic Sear & VA).
    (1) Good Finish + VA - $45 + shipping
    PM me a total cost
    thanks

  10. #10
    Join Date
    Apr 2009
    Posts
    397
    If Rudz didn't take it, I'll go for the RPG foregrip parted off the classic mag.

    Sending PM.

  11. #11
    Join Date
    Feb 2010
    Location
    Oklahoma
    Posts
    107
    I will take one of the bike grips w/VA, pming you for info

  12. #12
    Join Date
    Jan 2003
    Location
    Missouri
    Posts
    3,770
    All PM's replied to, except for the one guy who's inbox was full, but the parts he wanted were already spoken for anyway.


  13. #13
    Join Date
    Nov 2009
    Location
    Manch Vegas, NH
    Posts
    876
    RTP Bike Foregrips ($10 ea + shipping).
    Brand New - With RTP VA

    I'll take one with the vertical adapter.

  14. #14
    Join Date
    Jan 2003
    Location
    Missouri
    Posts
    3,770
    Quote Originally Posted by audioSLAVE
    RTP Bike Foregrips ($10 ea + shipping).
    Brand New - With RTP VA

    I'll take one with the vertical adapter.

    Total is $17.90 including shipping.

    PayPal can go to tech@logic-industries.com


  15. #15
    Join Date
    Aug 2006
    Posts
    327
    I'll take one of the black CCM feednecks. Shoot me a PM w/ total and paypal address.

    Thanks,
    Shives

  16. #16
    Join Date
    Jan 2009
    Location
    Michigan
    Posts
    255
    Pm'd about the black ule w/ aka feedneck

  17. #17
    Join Date
    Jan 2003
    Location
    Missouri
    Posts
    3,770
    PM's replied to.


  18. #18
    Join Date
    Dec 2001
    Location
    Houston
    Posts
    5,786

  19. #19
    Join Date
    Jan 2003
    Location
    Missouri
    Posts
    3,770
    Quote Originally Posted by GT
    prices are obo?
    Prices are already pretty durned low, but whatever.

    Go ahead and make me an offer, but if you lowball me, I may ridicule you in a general fashion and/or make insinuations about your heritage.

    Just so you know going in.


  20. #20
    Join Date
    May 2008
    Location
    San Jose, CA
    Posts
    1,118
    damn, some sweet stuff on here. maybe its time for some dealer's to do a serious spring cleaning and see what other goodies you come up with.

  21. #21
    Join Date
    May 2005
    Posts
    852
    pmd on the blem rail

  22. #22
    Join Date
    Jan 2003
    Location
    Missouri
    Posts
    3,770
    All PM's replied to.


  23. #23
    Join Date
    Jan 2003
    Location
    Missouri
    Posts
    3,770
    All PM's replied to, again.


  24. #24
    Join Date
    Jun 2008
    Posts
    40
    I will take the blue fire blade trigger, 2 black classic VA, a new bike grip and a black CCM feed neck. I am in BC, Canada. Please let me know the total including shipping. Will paypal you on Thurday. (Will out town tomorrow!) Thank you.

  25. #25
    Join Date
    Jan 2003
    Location
    Missouri
    Posts
    3,770
    Quote Originally Posted by yellowzuk
    I will take the blue fire blade trigger, 2 black classic VA, a new bike grip and a black CCM feed neck. I am in BC, Canada. Please let me know the total including shipping. Will paypal you on Thurday. (Will out town tomorrow!) Thank you.
    You've got a PM with your total.


  26. #26
    Join Date
    Nov 2008
    Posts
    79
    Pm Sent!

  27. #27
    Join Date
    Sep 2009
    Location
    San Jose, CA
    Posts
    45
    Sent you a pm. Thanks!

  28. #28
    Join Date
    Jan 2003
    Location
    Missouri
    Posts
    3,770
    All PM's replied to.


  29. #29
    Join Date
    Jan 2003
    Location
    Missouri
    Posts
    3,770
    All PM's replied to, and everything bought and paid for before 8/3/10 has been shipped.


  30. #30
    Join Date
    May 2007
    Location
    chi-town
    Posts
    26

    drop

    pm

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •