Logic Paintball - Everything Automag Clearance SALE!

[bbotts77]

Satin Black body.

[KillerOfGiants]

interested in the satin black ULE body. should know tonight. unless bbotts gets it before me, lol. my feelings won't be hurt.

[CoolHand]

Botts beat ya by 20 mins man.

Sorry.

All PM's replied to.

[Stayhuge]

The frame kits at the top, do they include the vert asa with the lpr hole tapped? Also, how much programming and tuning is needed? Lastly, which valve on/off works best with this set up?

Thanks

[CoolHand]

The frame kits at the top, do they include the vert asa with the lpr hole tapped? Also, how much programming and tuning is needed? Lastly, which valve on/off works best with this set up?

Thanks

Yes, the tapped vertical adapter is included, but no LPR.

You have to set the dwell on the board, set the output pressure on the LPR, and make sure that the marker functions properly with those settings.

If it chuffs, you need more dwell or more LPR pressure, if your ROF is low, you need less dwell.

Don't ever exceed 70 PSI with the LPR or you'll blow the solenoid.

This frame requires the use of a stock EMag on/off assembly.

An EMag length on/off pin and quad-ring are included with each frame.

You just pull the pin out of your stock RTP/XValve on/off and install the one that came with the frame.

You cannot use the ULT with this frame, it won't reset the actuator properly.

All you have to provide are an XValve with a stock RTP on/off, some kind of RTP type rail, some type of RTP compatible body, a standard cocker type LPR, and whatever air hardware you need to hook up your bottle. The frame accepts dovetail bottom lines without the need for an adapter, but you can also bolt on any standard drop or rail.

And a 9V battery.

[splat15k]

PM sent.

[JR146243]

pm

[ajnin]

my pm didnt get a reply... and now the part is sold... lame I know I had to be one of the first pms in....

[CoolHand]

All PM's replied to.

[CoolHand]

my pm didnt get a reply... and now the part is sold... lame I know I had to be one of the first pms in....

Sorry man, you were about an hour behind the guy that actually bought that Alpha.

I'd have told you that then, but your PM box was full, so I couldn't.


[Bender]Buck up, meatbag. I'm sure someone who has an Alpha will die eventually. You humans are so fragile, it's just a matter of time.[/Bender]

[kwood]

man, if those electro pneu frame kits were already anno'ed i would be all over one
anyone know a cheap place to get one anno'ed fast?

[CoolHand]

man, if those electro pneu frame kits were already anno'ed i would be all over one
anyone know a cheap place to get one anno'ed fast?

No idea.

All my old anodizers have long since gone out of business.

Every time I try out a new anodizer, I miss PK just that much more. . . . .

[CoolHand]

All orders paid for as of 8-8-10 will go out in the AM.



Still plenty of stuff to sell.

If you want to buy a big lot of stuff, I'll accept offers or give discounts, especially if you buy one of the XValves.

[kwood]

No idea.

All my old anodizers have long since gone out of business.

Every time I try out a new anodizer, I miss PK just that much more. . . . .

is the blue frame kit still available?
also, do they require the use of a RT length rail?
do they require eyes to operate?

[CoolHand]

is the blue frame kit still available?
also, do they require the use of a RT length rail?
do they require eyes to operate?

Yes
Yes
No



Actually, you can use the frame with a Classic length rail, but there won't be any place left to mount the VA, because the trigger guard is very large.

I did one for one of the preorder guys that used a Phantom VA mounted to the front of the trigger guard (just like a vert bottle Phantom), and that seemed to work alright, but it makes you located the LPR somewhere else.

I can build you something custom to mount the VA off the front of the frame, or modify your rail to mount the VA farther out in front (like an extension of some kind).

Your call. It is a lot easier deal with an RTP length rail though.

[kwood]

what settings are available on the board?
are there any videos of these bad boys in action?

[CoolHand]

what settings are available on the board?
are there any videos of these bad boys in action?

Go here:

https://www.automags.org/forums/showthread.php?t=179550

Read the first several pages.

That should answer most of your questions.

As for modes on the board, I honestly don't know.

They are Universal T-Boards, but I'm not super familiar with them.

P8ntball4Me did the harnesses and initial flash on the boards.

Your best bet would be to talk to him or Scenario Dreams directly.

[p8ntbal4me]

As for modes on the board, I honestly don't know.

They are Universal T-Boards, but I'm not super familiar with them.

P8ntball4Me did the harnesses and initial flash on the boards.

Your best bet would be to talk to him or Scenario Dreams directly.

The boards used are Universal T-Boards (UTBs)

I made a video of the frame in semi auto for the guys involved on the pre-order a few pages back,....

Video of the Ripper frame working with a UTB

the settings were 18cps,.. and some cheater adjustments to make it fire crazy.....

The board is a universal board,.. meaning that it will work with almost any gun out there,.... its also programmable to settings YOU want,.. not settings that come pre-installed or settings you need re-flashed every time they change the rate of fire in a tourney.

If you want a 3 round burst,.. at 10.33 bps,.. it will do that.
If you want a full auto setting off the break,. then release the trigger,.. and get 3 round burst,.. it will do that.

Or you can have it be full auto then legal semi capped,.. or uncapped,... or capped with eyes on,. or off,.. the settings are endless really.

I made a new version of the manual,.. so it will help in programming the boards (the SD version is a bit hard to understand)

[CoolHand]

Good man.

I knew you'd show up when someone needed to be put some knowledge.

Johnny-On-The-Spot as always.

Thanks for the assist.

[kwood]

thanks for all the info P8nt and coolhand
it will give me a lot to think about

[p8ntbal4me]

man, if those electro pneu frame kits were already anno'ed i would be all over one
anyone know a cheap place to get one anno'ed fast?

I can get you some parts anodized.

You need to let me know what you are looking for (Mate or Gloss) and what color(s)

[kwood]

I can get you some parts anodized.

You need to let me know what you are looking for (Mate or Gloss) and what color(s)

got any price quotes?
and is there any way to make these frames completely electro like your vert frame?
i love the huge trigger guard design that these have and think they would be awesome set up like yours

[p8ntbal4me]

got any price quotes?
and is there any way to make these frames completely electro like your vert frame?
i love the huge trigger guard design that these have and think they would be awesome set up like yours

I need to know what you want,.. price depends on colors and finishes.

I can quote Matte and Gloss in single colors right now. Anything more than that requires examples and quotes beyond me.

The Ripper is EP,.. and would be HARD to convert to an electronic only frame.

[kwood]

I need to know what you want,.. price depends on colors and finishes.

I can quote Matte and Gloss in single colors right now. Anything more than that requires examples and quotes beyond me.

The Ripper is EP,.. and would be HARD to convert to an electronic only frame.

my apologies
if i decide to make a purchase i would want gloss black

[p8ntbal4me]

my apologies
if i decide to make a purchase i would want gloss black

If done in the same run as my frames,.. it would be $40. If it was done at a later date,.. you are quoted for the price at the time of the job done.

[kwood]

If done in the same run as my frames,.. it would be $40. If it was done at a later date,.. you are quoted for the price at the time of the job done.

does that include the vert asa anno as well?

[p8ntbal4me]

does that include the vert asa anno as well?

Frame and ASA,.. it would have been $35 but the ASA was an extra 5,.. total $40

[CoolHand]

NEW PRICE on the XValves!

Still lots of other stuff to sell as well.

[Rudz]

VMF triggers work in emags? If so, PM me

[CoolHand]

VMF triggers work in emags? If so, PM me

Nope.

They only fit the original vert mech mag frames I did.

I just listed them in case someone ran across a VMF without a trigger in it and needed a spare.

Sorry man.