Results 1 to 6 of 6

Thread: No Pressure

Hybrid View

  1. 08-05-2010, 08:42 PM #1
    Mark1
    Mark1 is offline Registered User
    Join Date
    Jul 2010
    Posts
    6

    No Pressure

    Recieved shoebox last night. Supplied 85lbs. to the source, seems to run perfectly but will not build any pressure. Double checked the bleed valve, it's full out. I'm thinking possibly a check valve. Or am I just overlooking something. Thanks, Mark
  2. 08-05-2010, 10:21 PM #2
    ShoeBox Tech
    ShoeBox Tech is offline Certified
    Join Date
    Jun 2010
    Location
    In the Box shop
    Posts
    41
    Full out, as unscrewed to the left against the stop screw you had to install?

    Do you have a line gauge or tank gauge you are looking at?
    Last edited by ShoeBox Tech; 08-05-2010 at 10:26 PM.
  3. 08-05-2010, 11:02 PM #3
    Mark1
    Mark1 is offline Registered User
    Join Date
    Jul 2010
    Posts
    6
    Yes, bleeder screw is full out against stop screw, counter clockwise.
  4. 08-06-2010, 01:29 AM #4
    AGD
    AGD is offline The man from AGD
    Join Date
    Oct 2000
    Location
    Chicago
    Posts
    5,893
    Do you have the ability to put about 800 psi backwards through the high pressure output? That usually sets the orings.

    Tom
  5. 08-06-2010, 02:39 AM #5
    Mark1
    Mark1 is offline Registered User
    Join Date
    Jul 2010
    Posts
    6
    Tom, will try that tomorrow. Thanks, Mark
  6. 08-06-2010, 11:04 AM #6
    Mark1
    Mark1 is offline Registered User
    Join Date
    Jul 2010
    Posts
    6
    "All Righty Tom" Yep! it's working as it should. Back blew with just 140psi shop air & it took right off. Thanks, Mark
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules