Results 1 to 6 of 6

Thread: No Pressure

  1. #1

    No Pressure

    Recieved shoebox last night. Supplied 85lbs. to the source, seems to run perfectly but will not build any pressure. Double checked the bleed valve, it's full out. I'm thinking possibly a check valve. Or am I just overlooking something. Thanks, Mark

  2. #2
    Join Date
    Jun 2010
    Location
    In the Box shop
    Posts
    41
    Full out, as unscrewed to the left against the stop screw you had to install?

    Do you have a line gauge or tank gauge you are looking at?
    Last edited by ShoeBox Tech; 08-05-2010 at 10:26 PM.

  3. #3
    Yes, bleeder screw is full out against stop screw, counter clockwise.

  4. #4
    Join Date
    Oct 2000
    Location
    Chicago
    Posts
    5,953
    Do you have the ability to put about 800 psi backwards through the high pressure output? That usually sets the orings.

    Tom

  5. #5
    Tom, will try that tomorrow. Thanks, Mark

  6. #6
    "All Righty Tom" Yep! it's working as it should. Back blew with just 140psi shop air & it took right off. Thanks, Mark

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •