XM15 Pump Mag kits

[XM15]

Ok guys I updated the list above. I made a few more to get everyone who has siad they want one get one. Pump handles are well under way. Below are updated pics of one with a hybred version pump handle. All I have left to do is drill the blocks for either direct mount or ASA mount whatever your choice is. I need to order the wave springs. If you would like a extra wave spring they will be a extra $3.00. I'm going to start taking payments of $65 for the kits plus $3.00 for extra springs so pm me for paypal info and let me know how you want the mounting block drilled and if you want a extra spring.

[XM15]

Kits are done all thats left is drilling the mounting blocks for direct or ASA mount. OPBN requested that I mount a RT vertical ASA on the mounting block. If any body else is interested in this I can also do that. The RT vertical ASA is about a 1/2" shorter than a AM/MM vertical ASA and will compensate for the thickness of the mounting block making your foregrip about the same length as it is without the mounting block. Kits are $65 if you want a extra wave spring they are $3.00. PM me for purchase

5 kits sold 8 left

[flyingpootang]

I'll take mine with a non ASA type. Are all kits pump handles with the pics listed above?...Thanks

[flyingpootang]

Paypal sent for 1 kit, non ASA type, no extra wave spring......Thanks

[Tek2974]

pm'd

[flyingpootang]

Did mine ever ship out? If so any tracking info?

[XM15]

I left to go hunting for deer gun season. My wife was going to ship them when the springs came. Now I gotta call and find out where they are otherwise all of the paid for ones are ready to go.

[flyingpootang]

I left to go hunting for deer gun season. My wife was going to ship them when the springs came. Now I gotta call and find out where they are otherwise all of the paid for ones are ready to go.

You know 5 pointers and above is the standard for AO'ers

[Pudgey51]

if u still have one in 2-3 weeks ill take one

[XM15]

I wish I would have seen a 5 pointer. Cold wet and no deer was this last trip for me. My buddy at least got a nice 8 pointer. Any way I got the wave springs straightened out if they went out today they should be here Friday. I can get the kits out Saturday then.

[OPBN]

Any status on this? I thought these had shipped?

[XM15]

Springs came in last night. I'm going to try to get to the post office today if I can get out of work before it closes. They will go out tommorow for sure priority mail. They should be to everyone by Friday or Saturday.

[XM15]

6 kits left and ready to go with wave springs. Kits $65 extra wave spring with kit $3. All paid for kits are going out USPS priority mail tommorow. Thanks to all who were first to buy these and sorry for the delay waiting on the wave springs.

[OPBN]

Got my pump kit in over the weekend. Nice and solid feeling.

[rseb4agze]

Got my pump kit in over the weekend. Nice and solid feeling.

Can you post pic of it attach to your marker

[OPBN]

Can you post pic of it attach to your marker

I'm always down for some Pump Porn:



Still not finished. Needs to have the rail pump milled(thus the reason for no cocking rod) and still looking for a suitable inline reg:

[rseb4agze]

I'm always down for some Pump Porn:



Still not finished. Needs to have the rail pump milled(thus the reason for no cocking rod) and still looking for a suitable inline reg:

Sweet set up!!!!

[pinkanese]

Would you be willing to modify a front block to accommodate a Z-Grip?

[XM15]

OPBN that's going to be one light tight setup.

Pinkanese I can most likely make it work with a z-grip. I don't own one though for reference. I can do the same thing I did with OPBN. You can send me your grip, I will mod the block to fit it and send it back with the pump kit.

[gmiller0]

ok.. my interest is peaked... I have a standard rail and stainless steel powerfeed body.. who could mill my stuff in order to make the pump kit work?

[audioSLAVE]

Are any kits still available or do they all have owners from the run you did?

[XM15]

I still have 5 kits right now ready to go. All that is left to do to them is dril and/or tap them how the buyer would like to mount them. You can choose to have a direct mount to the rail or a vertical ASA mount either options comes with the proper lowhead screw and is no extra charge. I can also do a RT asa like OPBN's gun pictured above.

[Tek2974]

blah, you can't have yours on a z grip, mine is going on a z grip....gr....pneumag z gripped pump, heck yeah!

[pinkanese]

blah, you can't have yours on a z grip, mine is going on a z grip....gr....pneumag z gripped pump, heck yeah!

Trying to be original?

http://i639.photobucket.com/albums/u...n/DSCN1309.jpg

[MAGpie]

I still have 5 kits right now ready to go. All that is left to do to them is dril and/or tap them how the buyer would like to mount them. You can choose to have a direct mount to the rail or a vertical ASA mount either options comes with the proper lowhead screw and is no extra charge. I can also do a RT asa like OPBN's gun pictured above.

Remember to keep mine aside!

[XM15]

Yours is set aside.

[DaveA]

Interested in getting a kit. Have to find a way to mill before definite, but do you have any left?

[XM15]

I have 4 kits left.

[shadow462]

Posting to subscribe. Gonna have to sell some stuff and build a pump mag now.

[bishop*ru]

whats the word on the pump handle clear and color options?