Results 1 to 30 of 74

Thread: Project EP mag ready for ano

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jun 2008
    the country of california

    Project EP mag ready for ano

    I have had a few PMs asking for some pictures of this build so here it is all done and ready for anodizing. This thing shoots lasers now that it has eyes

    Ego Star frame with EP mod(done by Loguzzzzzz)
    Ram (Clippard MPA-3, Machined/modified to fit by Loguzzzzzz)
    Unknown LPR off of a dragonfly
    UL RPG Recon rail (milled for eyes by Luke's Customs)
    UL body(milled for eyes/extra detent by Luke's Customs)
    Laser eyes(functional, Eyes and eye plates supplied by p8ntbal4me)
    PMI gas through for grip
    Freak barrel set
    CP drop and on/off asa
    SMC S070-SDG-32 Noid(good luck finding one in stock)

    Extra parts to anodize for different configurations. It is good to have extra parts anodized with your marker. that way if you want to change something for a different kind of play, or something brakes, or you are tired of the way it looks, then all you have to do is bolt on a different piece.

    Bullet LPR
    RPG Pnumatic frame
    Intelli frame
    CP direct mount on/off asa
    STI gass through

    Photobucket album for this build

    LPR setup (Tap size 1/8"x27 npt)

    The ram assembly
    Instructions From Loguzzzzzz "I machine the frame out a little on top and then shave the sides of the MPA-3 until it fits inside with a little friction. Take the modified ram and place it into the frame and adjust it so that it sits low enough in the frame to clear the sear and high enough to clear the board. Then I remove the trigger rod from the sear and place the frame and rail, with sear, together to mark the frame(for the main valve screw) with the sear it in the cocked position and the end of the ram in the proper position. I try to keep 1/16" to 1/8" between the sear and the ram." I edited for clarity

    Looking down through the rail and sear assembly at the ram and hose from the LPR

    The set screw for the ram.(Tap size for ram screws 6-32)Also the front screws from the sticky grips also holds the ram, for extra measure.

    Input hose from lpr(clear one) and the line to the ram(black one)

    Grip with noid(SMC Noid)

    Another shoot of the noid

    The marker with eyes mod, cover plates, and the laser light show.

    Two videos to follow. Before the eye mod and after. I still need to shoot the after mod video, and it will have a gravity feed portion to show the eyes work like they should.
    Last edited by hill160881; 11-24-2010 at 08:58 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts