Page 1 of 3 123 LastLast
Results 1 to 30 of 74

Thread: Project EP mag ready for ano

  1. #1
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134

    Project EP mag ready for ano

    I have had a few PMs asking for some pictures of this build so here it is all done and ready for anodizing. This thing shoots lasers now that it has eyes


    Specs
    X-Valve
    Ego Star frame with EP mod(done by Loguzzzzzz)
    Ram (Clippard MPA-3, Machined/modified to fit by Loguzzzzzz)
    Unknown LPR off of a dragonfly
    UL RPG Recon rail (milled for eyes by Luke's Customs)
    UL body(milled for eyes/extra detent by Luke's Customs)
    Laser eyes(functional, Eyes and eye plates supplied by p8ntbal4me)
    PMI gas through for grip
    Freak barrel set
    CP drop and on/off asa
    SMC S070-SDG-32 Noid(good luck finding one in stock)

    Extra parts to anodize for different configurations. It is good to have extra parts anodized with your marker. that way if you want to change something for a different kind of play, or something brakes, or you are tired of the way it looks, then all you have to do is bolt on a different piece.

    Bullet LPR
    RPG Pnumatic frame
    Intelli frame
    CP direct mount on/off asa
    STI gass through

    Photobucket album for this build
    http://s971.photobucket.com/albums/a.../UL%20Ego-mag/

    LPR setup (Tap size 1/8"x27 npt)


    The ram assembly
    Instructions From Loguzzzzzz "I machine the frame out a little on top and then shave the sides of the MPA-3 until it fits inside with a little friction. Take the modified ram and place it into the frame and adjust it so that it sits low enough in the frame to clear the sear and high enough to clear the board. Then I remove the trigger rod from the sear and place the frame and rail, with sear, together to mark the frame(for the main valve screw) with the sear it in the cocked position and the end of the ram in the proper position. I try to keep 1/16" to 1/8" between the sear and the ram." I edited for clarity


    Looking down through the rail and sear assembly at the ram and hose from the LPR


    The set screw for the ram.(Tap size for ram screws 6-32)Also the front screws from the sticky grips also holds the ram, for extra measure.


    Input hose from lpr(clear one) and the line to the ram(black one)


    Grip with noid(SMC Noid)


    Another shoot of the noid


    The marker with eyes mod, cover plates, and the laser light show.




    Two videos to follow. Before the eye mod and after. I still need to shoot the after mod video, and it will have a gravity feed portion to show the eyes work like they should.
    Last edited by hill160881; 11-24-2010 at 09:58 AM.

  2. #2
    Join Date
    Feb 2006
    Location
    Alhambra, CA
    Posts
    724
    Who milled the eyes for you? Looks real professional

  3. #3
    Join Date
    Dec 2002
    Location
    mon calamari
    Posts
    718
    Quote Originally Posted by RavishingEddie
    Who milled the eyes for you? Looks real professional
    tl;dr??
    Quote Originally Posted by hill160881
    Specs
    X-Valve
    Ego Star frame with EP mod(done by Loguzzzzzz)
    Unknown LPR off of a dragonfly
    UL rail (milled for eyes by Luke's Customs)
    UL body(milled for eyes/extra detent by Luke's Customs)
    and yes hill, that is a sweet marker. can't wait to see the videos. makes me want to work on my tac.
    e-mag 226
    flashed with 1.31

  4. #4
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,488
    Quote Originally Posted by hill160881
    Laser eyes(functional, Eyes and eye plates supplied by p8ntball4me)

    SMC S070-SDG-32 Noid(good luck finding one in stock)

    I dont have them in stock,.. but I have an account with SMC,... I can get them back in stock.
    _______________________
    Jai "P8ntbal4me" Menard

  5. #5
    Join Date
    Oct 2006
    Location
    Houston, TX
    Posts
    3,205
    Nice frame and rail match on the shapes.

    That PMI grip looks much better on your setup. It looked pretty ugly on my plain automag setup. I took off the bottom bump and recessed the threads a bit (they are bored the same all the way through). It's a stubby grip now, but still doesn't look like it on a plain vert adapter and short rail.
    Last edited by Spider-TW; 10-25-2010 at 10:05 AM.

  6. #6
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    I spent some time getting all the parts to match. It is hard to find parts without fancy milling on them, and when they have milling it almost never matches. It is also hard to find a non-drilled UL e-mag rail. I am probably going to have that pmi gas through milled smooth and straight to match the rest of the marker(cut some weight down to)

    Also, this noid WILL hit 20 bps, which is where the board is caped atm, This was a concern with this noid because of the pressure limit and flow rates. put a quad ring in the top of the on off and some trigger tuning and a smooth non chuffing 20.

    Videos as soon as my brother wakes up

    Round one without eyes is done and caped at 15 bps.

    http://www.youtube.com/watch?v=h7kjFdloRQ8

    Round two will have a gravity hopper caped at 20 bps

    http://www.youtube.com/watch?v=Z2qMlz30kRo

    Round three is semi mode caped at 20 bps/ dye rotor

    http://www.youtube.com/watch?v=IV9SovAXUGk
    Last edited by hill160881; 10-25-2010 at 12:06 PM.

  7. #7
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    All videos up and working

  8. #8
    Join Date
    Sep 2004
    Location
    time to make a slurpee!
    Posts
    1,638
    Very nice!

    That makes me want to add the eyes to at least one of mine now.

    Long Live AGD!

    _____________________________
    Last edited by Loguzzzzzz; 10-27-2010 at 02:29 PM.

  9. #9
    Join Date
    Nov 2006
    Location
    Mag shooter since '96 - S
    Posts
    4,566
    Very nice. I like those frames. they match an emag rail nicely.

  10. #10
    Join Date
    Apr 2006
    Location
    Don' ask questions. It is considered "trolling" in some locations.
    Posts
    4,250
    Quote Originally Posted by hill160881
    SMC S070-SDG-32 Noid(good luck finding one in stock)
    If you buy them in lots of 10 or more I can get them for ~25.00ea

  11. #11
    Join Date
    Aug 2004
    Location
    Benson NC
    Posts
    101
    Quote Originally Posted by p8ntbal4me
    I dont have them in stock,.. but I have an account with SMC,... I can get them back in stock.
    I'm in need or one...


    and Hill you realize now you're gonna make me spend money getting eyes put on mine right?
    Last edited by Xernex; 10-25-2010 at 06:59 PM.

  12. #12
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    Quote Originally Posted by Xernex
    I'm in need or one...


    and Hill you realize now you're gonna make me spend money getting eyes put on mine right?
    Good we need more mags with eyes. It stops the chopping jokes

  13. #13
    Join Date
    Aug 2004
    Location
    Left Coast Currently
    Posts
    2,457
    I just have to say that it's a damn good thing you have a well stocked PB shop just down the road from ya!



    DM

  14. #14
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    Also helps to know the owner personally

  15. #15
    Join Date
    May 2008
    Location
    Socal
    Posts
    528
    Quote Originally Posted by MANN
    If you buy them in lots of 10 or more I can get them for ~25.00ea
    If you decide to do a group buy, I'm open to purchasing one for that price

    You can put me down for (2) if that helps and I have cash ready..
    Last edited by rseb4agze; 11-06-2010 at 09:35 AM.

  16. #16
    Join Date
    Aug 2004
    Location
    Benson NC
    Posts
    101
    I'm down for one at that price too... I really wanna finish my build.

  17. #17
    Join Date
    Jun 2009
    Location
    Kentucky
    Posts
    4,146
    I'll take 2 for sure.

  18. #18
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    Man these must be harder to get than I thought.

    I will take two as well. Thats 7 so far. Only three to go.

  19. #19
    Join Date
    Apr 2006
    Location
    Don' ask questions. It is considered "trolling" in some locations.
    Posts
    4,250
    If one of you want to purchase 10 and resell I will get them. I am not going to take the time to sell them tho.

  20. #20
    Join Date
    Feb 2006
    Location
    Alhambra, CA
    Posts
    724
    Quote Originally Posted by MANN
    If one of you want to purchase 10 and resell I will get them. I am not going to take the time to sell them tho.

    I can't do 10 but I will do 5. I hope that makes it better

  21. #21
    Join Date
    Aug 2004
    Location
    Benson NC
    Posts
    101
    I'm down for somebody else doing the resell... heck I'd throw my cash in right now.

  22. #22
    Join Date
    Apr 2006
    Location
    Don' ask questions. It is considered "trolling" in some locations.
    Posts
    4,250
    I will try to call them Monday.

  23. #23
    Join Date
    Aug 2004
    Location
    Benson NC
    Posts
    101
    Quote Originally Posted by MANN
    I will try to call them Monday.


    Awesome, Thanks!

  24. #24
    Sweet gun!

    Count me in for one of those solenoids as well, It's the last thing I need to finish my project.

  25. #25
    Join Date
    Aug 2004
    Location
    Benson NC
    Posts
    101
    I finally finished mocking mine up today... gotta throw in the noid and get an lpr then I'm ready for the first test... Still gotta get an xvalve and ult... then a new body.. just haven't decided what I'm gonna use yet

  26. #26
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    Quote Originally Posted by Xernex
    I finally finished mocking mine up today... gotta throw in the noid and get an lpr then I'm ready for the first test... Still gotta get an xvalve and ult... then a new body.. just haven't decided what I'm gonna use yet

    I dont have a ult It slows down the recharge time(in my opinion)

  27. #27
    Join Date
    May 2008
    Location
    Socal
    Posts
    528
    Quote Originally Posted by MANN
    I will try to call them Monday.
    Any undates on the solenoid

  28. #28
    Join Date
    Aug 2004
    Location
    Benson NC
    Posts
    101
    Quote Originally Posted by rseb4agze
    Any undates on the solenoid

    Talked to MANN yesterday, said it slipped his mind to call. He asked me to PM him and remind him tomorrow to make the call.

  29. #29
    Join Date
    May 2008
    Location
    Socal
    Posts
    528
    Quote Originally Posted by Xernex
    Talked to MANN yesterday, said it slipped his mind to call. He asked me to PM him and remind him tomorrow to make the call.
    Sweet.. Well keep us posted..

  30. #30
    Join Date
    Apr 2006
    Location
    Don' ask questions. It is considered "trolling" in some locations.
    Posts
    4,250
    I just got off the phone with them, and they are checking to see how long it would take to get here. My cost is 33.21ea + 9.25% tax = 36.28ea (according to my seller they were 28ea last time I purchased, and they have gone up in price for some reason). I would think shipped they would be @ 40ea.

    If you are still interested pm me. If we get enough interest Ill make a thread, and get an order organized.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •