Results 1 to 4 of 4

Thread: Feed neck size of EGO?

  1. #1
    Join Date
    Sep 2008
    Location
    Ohio
    Posts
    4,602

    Feed neck size of EGO?

    I need a clamping feedneck for a Lukes vert modded MM body. I know the feed neck is 7/8" and have found a Redz clamping feedneck in the past that fit, but can't seem to find one anymore. The one I bought before said it was for a Spyder and had three set screws. I just ordered a new one and the thing that came was the type with the tabs, not set screws. I thought I remember someone saying the Ego 5/6 feednecks were the same size. Anyone know?
    Last edited by OPBN; 11-08-2010 at 02:56 PM.

  2. #2
    The ego 5/6 clamping feed necks will work. If i remember correctly, Spidertw used a piece of brass stock about .023 thick in between the feedneck and the clamping feedneck. You might be able to find the brass at a hobby or craft store?

  3. #3
    Join Date
    May 2007
    Location
    a wretched hive of scum and villainy
    Posts
    556
    I use an Ego feedneck on my Lukes vert modded RT
    it needs a spacer
    I use the strap part of a hose clamp, works perfect

  4. #4
    Quote Originally Posted by 211
    I use an Ego feedneck on my Lukes vert modded RT
    it needs a spacer
    I use the strap part of a hose clamp, works perfect
    That is a good idea. Thanks for the tip

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •