Page 1 of 24 1234511 ... LastLast
Results 1 to 30 of 715

Thread: New E-Mag/X-Mag board!!!!!!

  1. #1
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,486

    New E-Mag/X-Mag board!!!!!!

    REFLEX PAINTBALL CUSTOMS
    E-Mag/X-Mag Board

    This is a completely new board that will replace the no longer available OEM boards

    The board is a “drop in replacement” product (take the old one out, drop the new one in. Save all your old electronic parts.NO SOLDERING!!!!)

    We made some changes to the current design to make it more up to date

    The New Main Board Supports the following features:
    A New ACE board (will be ready for Tunaball 6!!!)
    Break Beam/Bounce Beam Eye Systems
    New HES trigger
    Use the rear button as a power switch
    Use the rear button as a mode/eye switch
    Multi-color LED (no LED Screen)
    AUX/Warp Feed Port
    Solenoid Port (you can unplug your solenoid)
    Power Port (you can unplug your power cable)
    Solenoid Polarity Correction


    The R.P.C. E/X-Mag Boards come pre-loaded with our Reflex 7.0 software.
    With our advanced code driving your new board, you will push your AGD marker beyond its limits!

    Reflex 7.0 Code supports:
    (13) Fire modes = Semi (uncapped), Semi (capped), Auto Response, "Mild Ramp", "Max Ramp", "Z-Burst", Full Auto, CFOA, Millenium, PSP Auto Response, PSP Ramp, PSP Burst, NXL
    Adjustable Trigger Debounce (checks trigger noise levels)
    Adjustable Dwell (adjustment for your solenoid)
    Adjustable Anti-Bolt Stick (adjustment for the bolt system)
    Adjustable Ramp Rate (percentage of how fast to get to ramping modes)
    Adjustable Ramp Start BPS (how fast you have to ACTUALLY shoot in order to start ramping)
    MROF (the max rate of fire your marker will shoot when the board is turned on)
    Adjustable Burst Value (works with "Z-burst" and "PSP Z-Burst". Changes the number of shots)
    Eye Off ROF (the rate of fire you can get when the eyes are dirty or malfunctioning)
    Eye Type (Break Beam or Reflective/ACE)
    Adjustable Mechanical Debounce (checks marker noise levels)
    Reset to Factory Defaults

    When you Purchase a New Board it comes with:

    (1) New R.P.C. E/X-Mag Main Board with Reflex 7.0 software
    (1) New Power Cable (connects your battery to your board)
    (1) New HES (the trigger switch)
    (1) New Solenoid Coil (connects to your new board with connectors so you can remove it)

    /
    Optional Equipment Service Purchase:

    A new Warp Feed Cable (made for both Left & Right hand shooters) = $15
    A new ACE Board and Cable (ready for Tunaball 6) = $?????
    A Complete Board Installation to your AGD lowers (you send in your lowers. We remove all your existing OEM electronics and install the new electronics for you) = $50
    New/Upgraded Software Flash = $25
    Custom Code Modifications = PM me


    We are making 100 boards in the first run

    We have set a price of $189 (shipping and insurance NOT included)

    How to Purchase:
    Contact me via PM.
    Payment in the form of "Personal - Gift" via Paypal ONLY
    Minimum $100 non-refundable deposit required to reserve your place on the pre-order


    Purchase & Shipping Information: (copy this into your PM AND YOUR PAYPAL NOTES and fill the information out)
    Your AO Name:
    Your First and Last Name:
    Your Paypal Shipping Address (the address on your paypal account where you have items sent to)
    Your Shipping Address (the address we are sending the board to; can be different than the address above)
    Your Phone Number (xxx-xxx-xxxx)
    Your Paypal E-Mail Address (the one registered with Paypal)
    Your E-Mail Address (if different from the paypal e-mail address)
    Payment(s) Sent: (we would like the buyer as well as us keeping track of all payments sent to avoid any confusion; include amounts and dates)
    Payment Form: Payments MUST be sent as a "Personal - Gift" to: jjai@comcast.net

    VIDEO!!!!
    This is the first video
    Shot with the board on 18bps semi auto mech R/T bounce. The paint was All Star that was 2 months old and it was 53 degrees.
    <iframe width="420" height="315" src="http://www.youtube.com/embed/gb2FFcwA1P8" frameborder="0" allowfullscreen></iframe>

    This is the second video.
    Shot with the board on 18bps full auto no R/T bounce, straight e-mode. The paint was breaking in the air (6shots) and one in the barrel. The paint was All Star that was 2 months old and it was 53 degrees.
    <iframe width="420" height="315" src="http://www.youtube.com/embed/Z3Fi1gwH89U" frameborder="0" allowfullscreen></iframe>

    This is the third video.
    You can see the internal AUX port (warp feed link) which activates the warp feed every shot for the duration of dwell set by the jumpers on the warp feed board and not just the settings on the main board. The gun was in full auto at the time. I tested it in semi and got the same results.
    <iframe width="420" height="315" src="http://www.youtube.com/embed/z3ndwTGpqj8" frameborder="0" allowfullscreen></iframe>
    Note: Ive done some surgery on my warp feed YEARS ago (at least 5 since this is the one I used at TB1) which includes an 18v mod, upgraded battery snaps, and some switching relays to speed up the motor. All of which are external to the warp feed main board and do not alter the link between the gun and the warp feed.

    Battery Test After 30 Days #1
    <iframe width="420" height="315" src="http://www.youtube.com/embed/zFaPhZPeQr8" frameborder="0" allowfullscreen></iframe>

    Battery Test After 30 days #2
    <iframe width="420" height="315" src="http://www.youtube.com/embed/eTFlj-lMuUo" frameborder="0" allowfullscreen></iframe>

    The List:

    1 - P8ntbal4me
    2 - BigEvil
    3 - Ando - $320 (paid $320 for two boards on 7/13/2012)
    4 - zondo = $160 - 9/5/2012
    5 - splat15k - $160
    9 - Ratt - $160
    6 - Imasho - $160
    7 - GVMV - $100
    8 - mrairman - $160
    9 - Chris - $160
    10 - robander3 - $160
    11 - havinnoj - $160 ( this spot was Tropical Life's and was sold per post #568 dated 9/10/2013)
    12 - weekendballer - $160
    13 - Emil- $100 / Paid $120 on both boards (13 & 14) to total = $316.22 (not sent as gift)
    14 - Emil - $100 / see above
    15 - tolar250 -$160
    16 - RST - $160
    17 - Hellrox - $160
    18 - rukh013 - $150
    19 - PanzerGen - $100
    20 - promethion - $100
    21 - knownothingmags - $189 - 9/4/2012 / Paid $366.74 on both boards (21 & 22) to total = $366.74 (not sent as gift)
    22 - knownothingmags - $189 - 9/4/2012 / see above
    23 - bbotts77 - $189 - 12/27/2012
    24 - reckid1986 - $189 - 2/14/2013
    25 - Loguzzzzzz - $160 - 7/12/2012
    26 - JimBobFett - $183.22 - 8/27/2013
    27 - goin5150 - $100 - 1/23/2014
    28 - flampaint - $189 - 1/24/2014
    29 - Spartacus - $195 - 4/14/2014
    30 - Arston - $189 - 9/16/2013
    31 - Arston - $189 - 9/16/2013
    32 - tolar250 - $189 - 9/16/2013
    33 - maverick13 - $100 - 4/28/2014
    34 - knownothingmags - $189.00 - 9/16/2013
    35 - smilestyler - $200 - 5/21/2014

    Need payment from the following
    19 - sjrtk
    20 - 4rpp
    21 - Swamp Thing
    22 - IrishRedneck86
    23 - Dirg
    24 -
    25 -
    26 - Ruler Mark
    27 - onecaribou
    28 - Enhander
    29 - fierymartel
    30 - inkedballer
    31 - Three Psycho
    32 - pk5
    33 -
    34 - Predaator.
    35 - motodrom16
    36 - erebus
    37 - ThreePsycho
    38 - carapace
    39 - ghost271
    40 - eelz
    41 - splatzone
    42 - baby face
    43 - BBS
    44 - Paintball smurf13
    45 - casanovaxl
    46 - soulcoffin
    47 - cyberkhan
    48 - axis
    49 - wileypb
    50 - the meanstreak
    51 - my automag
    52 - mostpeople
    53 -
    54 -
    55 -

    Reflex Paintball Cutsomes E/X-Mag Board Installation Guide/Manual
    Last edited by p8ntbal4me; 05-21-2014 at 07:51 PM. Reason: adding payment updates

  2. #2
    Join Date
    Feb 2005
    Location
    #1 Buck Adams fan
    Posts
    7,835
    OMG ITS BOB FROM TAG!!!! HOW DID YOU HACK JAI'S ACCOUNT!!!


    Put me down for one for sure... maybe more. LMK when to send some $$



    "I'm not happy unless you're not happy"

  3. #3
    Join Date
    Feb 2005
    Location
    #1 Buck Adams fan
    Posts
    7,835
    Oh, another thing.. how set in stone is the software at this point?

  4. #4
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,486
    Quote Originally Posted by BigEvil
    Oh, another thing.. how set in stone is the software at this point?
    As sure as the Granite Quarry's are up here in NH.....

    ,.. and yes,.. everyone will be MOST PLEASED
    _______________________
    Jai "P8ntbal4me" Menard

  5. #5
    Join Date
    Jun 2009
    Location
    Kentucky
    Posts
    4,146
    I'll be down for a backup.

  6. #6
    Join Date
    May 2009
    Location
    nj
    Posts
    785
    I'm down for one.

  7. #7
    Join Date
    Dec 2006
    Posts
    1,632
    Quote Originally Posted by p8ntbal4me
    As sure as the Granite Quarry's are up here in NH.....

    ,.. and yes,.. everyone will be MOST PLEASED
    Wait, what happened to the old man on the mountain?

    Are you still supporting the new HES?

    Put me on the list...

  8. #8
    Join Date
    Feb 2008
    Posts
    58
    me too

  9. #9
    Join Date
    Oct 2001
    Location
    Maine, New York
    Posts
    1,165
    Please put me down for one as well. Thanks!

  10. #10
    Join Date
    Dec 2007
    Posts
    358

    but me down

    for one as I have a need.

    Swamp

  11. #11
    Join Date
    Apr 2002
    Location
    White Sands Missile Range, NM
    Posts
    885
    Count me in for one.

  12. #12
    Join Date
    Jun 2009
    Location
    Illinois
    Posts
    235
    Count me in for 2

  13. #13
    Join Date
    May 2004
    Location
    Schenectady NY
    Posts
    478
    In for one.

  14. #14
    Join Date
    Sep 2004
    Location
    time to make a slurpee!
    Posts
    1,633
    I am down for at least one.


  15. #15
    Join Date
    Aug 2008
    Location
    NH
    Posts
    1,782
    I'll gladly sign up for some new AGD love

    Thanks p8nt

  16. #16
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,486
    Awesome! 13 names in just 2 days!

    The list has been updated.

  17. #17
    Join Date
    Aug 2007
    Location
    Gainesville, FL
    Posts
    2,595
    +1

  18. #18
    Join Date
    Jun 2008
    Posts
    83
    Count me in for one.

  19. #19
    Join Date
    Mar 2007
    Location
    Morgantown, WV
    Posts
    480
    Count me in! Will this board have different firing modes similar to the XMod?

  20. #20
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,486
    Quote Originally Posted by Enhander
    Count me in! Will this board have different firing modes similar to the XMod?

    Yes. Typical things you find on an aftermarket board,....

  21. #21
    Join Date
    Jul 2005
    Posts
    427
    I take one for my future Emag.

  22. #22
    Join Date
    Nov 2010
    Posts
    2
    I'll take one, sign me up

  23. #23
    Join Date
    Mar 2005
    Location
    Milwaukee, WI
    Posts
    191
    I would take one.

  24. #24
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,486
    19 names and still going,.... we need 50 to make production.

    The details are not hammered out just yet on the new board as far as features.

    All we really have are basics:

    Will support the ACE
    Will support the HES
    Will accept the AGD power source
    Will be a complete replacement for the OEM board
    Will have New Code/Software

    Details that are being considered:

    Updated ports on the board from Molex to JST
    Bundled with a new solenoid coil (body no plunger)
    Bundled with new Ultra-HES
    Bundled with new Power wires/harness
    RF/Wireless Hopper/Warp Feed Connection
    Building a new ACE board


    Details that are not going to be seen:

    LED screen
    OLED screen
    End user upgradable/flash-able software


    Here is an interesting fact that will make some of you happy:

    This board will not be owned by the company that manufactured them,... they will be owned by us (us being myself and my silent partner) (other than the code)
    You will not have to worry about supply as we will be purchasing all BOM and Gerber files to make the boards. If we have sour dealings with a company or get a better price, we can walk away whenever we choose.
    We made the decision to purchase the labor and design cost up front last week. I will say it is pricy,... but it will eliminate a huge problem down the road.

  25. #25
    Join Date
    Jan 2006
    Posts
    608
    I am interested in one too, especially if the back button can be use as an on/off.

  26. #26
    Join Date
    Dec 2006
    Posts
    1,632
    P8nt, can you talk about the details that are being considered (solenoid coil, ultra HES, etc.)? Are these somethings that we/you are pushing for or are cost limiting? What are the advantages of these over the present configuration?

  27. #27
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,486
    Quote Originally Posted by zondo
    P8nt, can you talk about the details that are being considered (solenoid coil, ultra HES, etc.)? Are these somethings that we/you are pushing for or are cost limiting? What are the advantages of these over the present configuration?
    Bundled with a new solenoid coil (body no plunger)

    This was being considered because of the connection of the current solenoid body to the OEM board IE: its directly soldered on. In order to add a nice new port for the solenoid,.. we need to either provide a pigtail with the board or a new solenoid coil.

    Providing a pigtail means that you loose the "plug n play" factor. You also loose the 100% correct calibration of the solenoid. This however, is the cheapest solution to an upgrade board.

    Providing a new solenoid coil means its a "plug n play" upgrade. Down side is that the cost will go up rather quick. The boards wont be cheap as it is..... look at what it costs for an OEM board and solenoid from AGD = $250.00

    Bundled with new Ultra-HES

    We may or may not change the ports from Molex to JST for the HES. Lots of guys are going to think that it would save cash to use the AGD HES,.. which from the go,. it would. You would run into a higher cost if you are one of those people whom do not know that AGD didnt have a color standard on the OEM HES,... making it impossible to write an accurate manual or support a product after it leaves our hands once purchased due to "operator error". Its easy to kill a board,... bundling it with a new HES we KNOW was build by us and the board will be designed for,... saves money in the long run.

    Bundled with new Power wires/harness

    We were thinking that most of you out there would ditch the OEM board (or Tuna will buy them all ) once the new board is purchased. With this in mind,.. we thought that making a new wire harness to work with the power supply would be best. This would be something with connectors that COULD plug into a ACE board if you decided down the road to upgrade your "guts" from an E-Mag to an X-Mag. This also relies on another possible bundles item,.......

    Building a new ACE board

    If we build a new ACE board,.. we jack up cost on everything about how the main board works with other parts. I think its safe to say that those of you whom JUST want a new Main board will not see a price hike in your board up front. You would see it in upgrades later on such as a new wire harness or something to add components later.

    RF/Wireless Hopper/Warp Feed Connection

    Pretty straight forward,... this would be the best thing ever to happen to a Warp Feed,.. save the next item we are working on

  28. #28
    Join Date
    Apr 2002
    Location
    White Sands Missile Range, NM
    Posts
    885
    Quote Originally Posted by p8ntbal4me
    Details that are not going to be seen:

    LED screen
    OLED screen
    End user upgradable/flash-able software
    So...are you saying that, instead of turning the marker on and seeing "Xmod 1.4 Beta" scroll across a screen, all I am going to see is different colored LED's?

  29. #29
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,486
    Quote Originally Posted by Ratt
    So...are you saying that, instead of turning the marker on and seeing "Xmod 1.4 Beta" scroll across a screen, all I am going to see is different colored LED's?

    Yes. The LED screen is:

    Expensive
    Takes up a lot of usable space
    Expensive to add in for hardware
    Outdated as far as reasoning to keep it
    Expensive to write code for


    ,.. expensive.

    LEDs are just as good as anything else (besides OLED) and cut a lot of cost

  30. #30
    Join Date
    Feb 2008
    Posts
    58
    i would prob want an ace

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •