Page 1 of 7 12345 ... LastLast
Results 1 to 30 of 824

Thread: New E-Mag/X-Mag board!!!!!!

Hybrid View

  1. #1
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,543

    New E-Mag/X-Mag board!!!!!!

    REFLEX PAINTBALL CUSTOMS
    E-Mag/X-Mag Board

    This is a completely new board that will replace the no longer available OEM boards

    The board is a “drop in replacement” product (take the old one out, drop the new one in. Save all your old electronic parts.NO SOLDERING!!!!)

    We made some changes to the current design to make it more up to date

    The New Main Board Supports the following features:
    A New ACE board (will be ready for Tunaball 6!!!)
    Break Beam/Bounce Beam Eye Systems
    New HES trigger
    Use the rear button as a power switch
    Use the rear button as a mode/eye switch
    Multi-color LED (no LED Screen)
    AUX/Warp Feed Port
    Solenoid Port (you can unplug your solenoid)
    Power Port (you can unplug your power cable)
    Solenoid Polarity Correction


    The R.P.C. E/X-Mag Boards come pre-loaded with our Reflex 7.0 software.
    With our advanced code driving your new board, you will push your AGD marker beyond its limits!

    Reflex 7.0 Code supports:
    (13) Fire modes = Semi (uncapped), Semi (capped), Auto Response, "Mild Ramp", "Max Ramp", "Z-Burst", Full Auto, CFOA, Millenium, PSP Auto Response, PSP Ramp, PSP Burst, NXL
    Adjustable Trigger Debounce (checks trigger noise levels)
    Adjustable Dwell (adjustment for your solenoid)
    Adjustable Anti-Bolt Stick (adjustment for the bolt system)
    Adjustable Ramp Rate (percentage of how fast to get to ramping modes)
    Adjustable Ramp Start BPS (how fast you have to ACTUALLY shoot in order to start ramping)
    MROF (the max rate of fire your marker will shoot when the board is turned on)
    Adjustable Burst Value (works with "Z-burst" and "PSP Z-Burst". Changes the number of shots)
    Eye Off ROF (the rate of fire you can get when the eyes are dirty or malfunctioning)
    Eye Type (Break Beam or Reflective/ACE)
    Adjustable Mechanical Debounce (checks marker noise levels)
    Reset to Factory Defaults

    When you Purchase a New Board it comes with:

    (1) New R.P.C. E/X-Mag Main Board with Reflex 7.0 software
    (1) New Power Cable (connects your battery to your board)
    (1) New HES (the trigger switch)
    (1) New Solenoid Coil (connects to your new board with connectors so you can remove it)

    /
    Optional Equipment Service Purchase:

    A new Warp Feed Cable (made for both Left & Right hand shooters) = $15
    A new ACE Board and Cable (ready for Tunaball 6) = $?????
    A Complete Board Installation to your AGD lowers (you send in your lowers. We remove all your existing OEM electronics and install the new electronics for you) = $50
    New/Upgraded Software Flash = $25
    Custom Code Modifications = PM me


    We are making 100 boards in the first run

    We have set a price of $189 (shipping and insurance NOT included)

    How to Purchase:
    Contact me via PM.
    Payment in the form of "Personal - Gift" via Paypal ONLY
    Minimum $100 non-refundable deposit required to reserve your place on the pre-order


    Purchase & Shipping Information: (copy this into your PM AND YOUR PAYPAL NOTES and fill the information out)
    Your AO Name:
    Your First and Last Name:
    Your Paypal Shipping Address (the address on your paypal account where you have items sent to)
    Your Shipping Address (the address we are sending the board to; can be different than the address above)
    Your Phone Number (xxx-xxx-xxxx)
    Your Paypal E-Mail Address (the one registered with Paypal)
    Your E-Mail Address (if different from the paypal e-mail address)
    Payment(s) Sent: (we would like the buyer as well as us keeping track of all payments sent to avoid any confusion; include amounts and dates)
    Payment Form: Payments MUST be sent as a "Personal - Gift" to: jjai@comcast.net

    VIDEO!!!!
    This is the first video
    Shot with the board on 18bps semi auto mech R/T bounce. The paint was All Star that was 2 months old and it was 53 degrees.
    <iframe width="420" height="315" src="http://www.youtube.com/embed/gb2FFcwA1P8" frameborder="0" allowfullscreen></iframe>

    This is the second video.
    Shot with the board on 18bps full auto no R/T bounce, straight e-mode. The paint was breaking in the air (6shots) and one in the barrel. The paint was All Star that was 2 months old and it was 53 degrees.
    <iframe width="420" height="315" src="http://www.youtube.com/embed/Z3Fi1gwH89U" frameborder="0" allowfullscreen></iframe>

    This is the third video.
    You can see the internal AUX port (warp feed link) which activates the warp feed every shot for the duration of dwell set by the jumpers on the warp feed board and not just the settings on the main board. The gun was in full auto at the time. I tested it in semi and got the same results.
    <iframe width="420" height="315" src="http://www.youtube.com/embed/z3ndwTGpqj8" frameborder="0" allowfullscreen></iframe>
    Note: Ive done some surgery on my warp feed YEARS ago (at least 5 since this is the one I used at TB1) which includes an 18v mod, upgraded battery snaps, and some switching relays to speed up the motor. All of which are external to the warp feed main board and do not alter the link between the gun and the warp feed.

    Battery Test After 30 Days #1
    <iframe width="420" height="315" src="http://www.youtube.com/embed/zFaPhZPeQr8" frameborder="0" allowfullscreen></iframe>

    Battery Test After 30 days #2
    <iframe width="420" height="315" src="http://www.youtube.com/embed/eTFlj-lMuUo" frameborder="0" allowfullscreen></iframe>

    The List:

    1 - P8ntbal4me
    2 - BigEvil
    3 - Ando - $320 (paid $320 for two boards on 7/13/2012)
    4 - zondo = $160 - 9/5/2012 (address confirmed) (FEDEX - 780278651393) SHIPPING = $17.66
    5 - splat15k - $160 (address confirmed) (FEDEX - 780278611632) SHIPPING = $18.13
    9 - Ratt - $160
    6 - Imasho - $160
    7 - GVMV - $100
    8 - mrairman - $160 (address confirmed) (FEDEX - 780278653753) SHIPPING = $18.13
    9 - Chris - $160 (address confirmed) (FEDEX - 780278601860) SHIPPING = $19.32
    10 - robander3 - $160
    11 - havinnoj - $160 ( this spot was Tropical Life's and was sold per post #568 dated 9/10/2013)
    12 - weekendballer - $160
    13 - Emil- $100 / Paid $120 on both boards (13 & 14) to total = $316.22 (not sent as gift)
    14 - Emil - $100 / see above
    15 - tolar250 -$160 (address confirmed) (FEDEX - 780278655815) SHIPPING = $21.43
    16 - RST - $160 (address confirmed) (USPS - LZ314239788US) SHIPPING = $15.08
    17 - Hellrox - $160
    18 - rukh013 - $150
    19 - PanzerGen - $100
    20 - promethion - $100
    21 - knownothingmags - $189 - 9/4/2012 / Paid $366.74 on both boards (21 & 22) to total = $366.74 (not sent as gift)(address confirmed) (USPS - 9407403699300008364289) ACCOUNT PAID IN FULL!
    22 - knownothingmags - $189 - 9/4/2012 / see above (address confirmed) (USPS - 9407403699300008364289) ACCOUNT PAID IN FULL!
    23 - bbotts77 - $189 - 12/27/2012 (address confirmed) (FEDEX - 780278615248) SHIPPING = $18.64
    24 - reckid1986 - $189 - 2/14/2013 (address confirmed) (FEDEX - 780278608279) SHIPPING = $18.29
    25 - Loguzzzzzz - $160 - 7/12/2012 (address confirmed) (FEDEX - 780278645148) ACCOUNT PAID IN FULL!
    26 - JimBobFett - $183.22 - 8/27/2013
    27 - goin5150 - $100 - 1/23/2014 / $100 - 12/31/2014
    28 - flampaint - $189 - 1/24/2014 (address confirmed) (USPS - LZ314239765US) SHIPPING = $15.08
    29 - Spartacus - $195 - 4/14/2014
    30 - Arston - $189 - 9/16/2013 (address confirmed) (FEDEX - 780278657748) SHIPPING = $18.10
    31 - Arston - $189 - 9/16/2013 (address confirmed) (FEDEX - 780278657748) SHIPPING = $0
    32 - tolar250 - $189 - 9/16/2013 (address Confirmed ) (USPS - 9407803699300014543188) SHIPPING = $0
    33 - maverick13 - $100 - 4/28/2014 (address confirmed) (USPS - LZ314239774US) ACCOUNT PAID IN FULL!
    34 - knownothingmags - $189.00 - 9/16/2013 (address confirmed) (USPS - 9407403699300008364289) ACCOUNT PAID IN FULL!
    35 - smilestyler - $200 - 5/21/2014 (address confirmed) (USPS - LZ314239791US) SHIPPING = $9.50
    36 - Ando (paid for 2 boards / see #3 above)
    37 - SummaryJudgement - $189 1/2/2015 (address confirmed) (USPS - 9434910200883557505640) SHIPPING = $12.36

    BOARDS #37-100 ARE FOR SALE

    Get one of these now. Unless someone fronts the production cost up front ($5,000) I will not be making any more.



    Reflex Paintball Cutsomes E/X-Mag Board Installation Guide/Manual
    Last edited by p8ntbal4me; 03-07-2015 at 05:54 PM. Reason: adding payment updates

  2. #2
    Join Date
    Feb 2005
    Location
    Nome Alaska
    Posts
    8,139
    OMG ITS BOB FROM TAG!!!! HOW DID YOU HACK JAI'S ACCOUNT!!!


    Put me down for one for sure... maybe more. LMK when to send some $$


    Quote Originally Posted by Nobody View Post
    This is not me. I have nothing to do with this, but i aprove of it.

  3. #3
    Join Date
    Feb 2005
    Location
    Nome Alaska
    Posts
    8,139
    Oh, another thing.. how set in stone is the software at this point?

  4. #4
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,543
    Quote Originally Posted by BigEvil
    Oh, another thing.. how set in stone is the software at this point?
    As sure as the Granite Quarry's are up here in NH.....

    ,.. and yes,.. everyone will be MOST PLEASED
    _______________________
    Jai "P8ntbal4me" Menard

  5. #5
    Join Date
    Dec 2006
    Posts
    1,826
    Quote Originally Posted by p8ntbal4me
    As sure as the Granite Quarry's are up here in NH.....

    ,.. and yes,.. everyone will be MOST PLEASED
    Wait, what happened to the old man on the mountain?

    Are you still supporting the new HES?

    Put me on the list...

  6. #6
    Join Date
    Feb 2008
    Posts
    58
    me too

  7. #7
    Join Date
    Jun 2009
    Location
    Kentucky
    Posts
    4,148
    I'll be down for a backup.

  8. #8
    Join Date
    May 2009
    Location
    nj
    Posts
    796
    I'm down for one.

  9. #9
    Join Date
    Aug 2010
    Posts
    23

    i want one sir

    Quote Originally Posted by p8ntbal4me
    New E-Mag/X-Mag board

    Yes,.. you read that correctly!

    We are going to make a new board for the E-Mag and X-Mag

    This will be a completely new board that will replace the no longer available OEM boards

    The board will be a “drop in replacement” product

    We are going to make some changes to the current design to make it more up to date

    We are looking to support some of the following features:
    The ACE board
    Break Beam/Bounce Beam Eye Systems
    HES trigger
    Use the rear button as a power switch
    Use the rear button as a mode/eye switch
    Multi-color LED (no LED Screen)
    Warp Feed Port
    Solenoid Port
    Power Port
    Solenoid Polarity Correction
    RF Hopper link


    We are looking to make 100 boards in the first run

    We are still working on a price. It looks to be $150+

    We will test the board in video for all of you to see it prior to committing an order for production

    If you would like to be on the list at production time, please post here (No PMs)

    We will answer all questions about the board, price, shipping, software. code, options, etc at a later date

    Thank You,.....

    The List:

    1 - P8ntbal4me
    2 - BigEvil
    3 - Ando
    4 - sjrtk
    5 - zondo
    6 - 4rpp
    7 - splat15k
    8 - Swamp Thing
    9 - Ratt
    10 - IrishRedneck86
    11 - Dirg
    12 - Loguzzzzzz
    13 - SSP Reaper
    14 - Ruler Mark
    15 - onecaribou
    16 - Enhander
    17 - fierymartel
    18 - inkedballer
    19 - Three Psycho
    20 - pk5
    21 - bbotts77
    22 - Predaator.
    23 - motodrom16
    24 - erebus
    25- mrairman

  10. #10
    Join Date
    Sep 2010
    Location
    Ontario Canada
    Posts
    96
    Guess that will make me # 26

  11. #11
    Join Date
    Jun 2001
    Location
    Richmond,B.C., Canada
    Posts
    183
    Quote Originally Posted by Imasho
    Guess that will make me # 26
    Make me #27
    If you can't join em, shoot em !

  12. #12
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,543
    We are still moving right along with the new boards. Circuit design is complete. We are working on the ACE right now.

    As for software: we are looking into licensing options. We also have developed code for testing the boards during prototyping.

    We will have more information later on.

  13. #13
    Join Date
    Jun 2001
    Location
    Richmond,B.C., Canada
    Posts
    183
    Will the ACE plug straight into the board or will it be mounted on a second board like it currently is ? Also will the board include the eye and harness or will that be separate ?

  14. #14
    Join Date
    Nov 2010
    Location
    East Coast
    Posts
    500
    .....
    Last edited by Tropical Life; 12-01-2011 at 02:44 PM.

  15. #15
    Join Date
    Jun 2009
    Location
    Kentucky
    Posts
    4,148
    Christ. Your EMag will hit 20+ BPS with what you have now. It's not tuned like EVERYONE'S BEEN TRYING TO TELL YOU!!!

    Send your marker over to Tuna cause due to your lack of mannerism, I seriously doubt we can run you through the process.

  16. #16
    Join Date
    Feb 2005
    Location
    Nome Alaska
    Posts
    8,139
    Quote Originally Posted by Ando
    Christ. Your EMag will hit 20+ BPS with what you have now. It's not tuned like EVERYONE'S BEEN TRYING TO TELL YOU!!!

    Send your marker over to Tuna cause due to your lack of mannerism, I seriously doubt we can run you through the process.

    THIS

  17. #17
    Join Date
    May 2009
    Location
    nj
    Posts
    796
    Hey don't start this here. You two know better.

  18. #18
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,543
    Quote Originally Posted by Tropical Life
    Hi will your new boards be able to shoot more then 20 bps with stock solenoid? if yes how so?

    Thanks
    Yes,.. the new boards will be able to hit a CPS rate of 50.

    Much more than the AGD solenoid has been confirmed to reach.

  19. #19
    Join Date
    Sep 2003
    Location
    NY
    Posts
    162
    You can count me in for one when you start selling

  20. #20
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,543

    Update

    We had a change in the board design.

    When we were having so much trouble with the ramping software, we didn't think a hardware issue was to blame.

    Now, we have made a massive change to the current design which will aid us in re-programming in the future for updates.

    Production boards have been re-issued and the bare boards should be completed in a few weeks.
    Last edited by p8ntbal4me; 06-30-2011 at 03:52 AM. Reason: spelling and such

  21. #21
    Join Date
    May 2009
    Location
    nj
    Posts
    796
    Time to hurry up and wait!!!! Kidding, good work i can't wait to be able to use the board.


  22. #22
    Join Date
    Nov 2010
    Location
    East Coast
    Posts
    500
    Looks sweet,

    "NOTICE
    For those of you that have X-mags or E-mags with milling to support the ACE board, the new ACE boards WILL be completed next."

    Keeping an eye out for when you release the new ace boards also. Hopefully it will be done with main boards to get a sweet combo. Would be nice if the new ace boards have a on/off switch installed option.

  23. #23
    Join Date
    Feb 2005
    Location
    Nome Alaska
    Posts
    8,139
    Im glad to see that all of your hard work and efforts are paying off.


    On another note, have you thought of a name for it yet? Can I nominate "F.U.B.S." or "F.U.T.S."

  24. #24
    Join Date
    Oct 2000
    Location
    Walnut Creek, CA
    Posts
    831
    I don't see my name on the preorder list yet. Please add me, I will take one of the first boards.

  25. #25
    Join Date
    Oct 2000
    Location
    Walnut Creek, CA
    Posts
    831
    Payment sent in full.

  26. #26
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,543
    Updated first post with payments received!

  27. #27
    Join Date
    Apr 2010
    Location
    Near Toronto, Canada
    Posts
    591
    I just wanted to say that this is awesome that you've done this. I'd shake your hand if I could.

    Some boards are just beyond repair, its good to know that all is not lost.

  28. #28
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,543
    Some boards are just beyond repair, its good to know that all is not lost.
    I felt bad after the first try fell through.

    After 3 years, we will have replacement parts we need to keep going.

    Just think, in a few years I will have an OLED/LCD board in the works.

  29. #29
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,543
    4 payments out of 47 needed.

    We cant move to production until you guys get on board.

  30. #30
    Join Date
    Mar 2012
    Location
    Houston, TX
    Posts
    616
    ill take one

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •